Swarming is a honey bee colony's natural means of reproduction. In the process of swarming, a single colony splits into two or more distinct colonies.
Swarming is mainly a spring phenomenon, usually within a two- or three-week period depending on the locale, but occasional swarms can happen throughout the producing season. Secondary afterswarms, or cast swarms, may occur. Cast swarms are usually smaller and are accompanied by a virgin queen. Sometimes a beehive will swarm in succession until it is almost totally depleted of workers.
One species of honey bee that participates in such swarming behavior is Apis cerana. Reproductive swarms of this species may temporarily settle near the original nest before departing for a new nesting site. Scout bees search for suitable locations in which the new colony can establish its nest. Successful scouts then return and communicate information about potential nesting sites to the other bees.[citation needed] Apis mellifera participates in a similar swarming process. The nest-site selection process of this species has been studied extensively.
Swarming occurs in both rural and urban areas. In urban environments, swarms may originate from managed hives or from established unmanaged colonies. Swarms can temporarily settle on buildings and other structures, sometimes requiring collection or relocation by beekeepers.

Worker bees create queen cups throughout the year. When the hive is getting ready to swarm, the queen lays eggs into the queen cups. New queens are raised, and the hive may swarm as soon as the queen cells are capped and before the new virgin queens emerge from their queen cells. Before swarming, workers reduce the amount of food provided to the queen, causing her weight to decrease and her egg laying to decline. This prepares the queen for flight and temporarily interrupts the brood production of the original colony.
During swarm preparation, scout bees may identify nearby locations where the departing swarm can temporarily cluster. When a honey bee swarm emerges from a hive, it generally does not fly far at first. The bees may gather in a tree or on a branch only a few metres (yards) from the hive. There they cluster around the queen while scout bees search for suitable new nest locations. This intermediate stop is not intended for permanent habitation, and the swarm normally leaves after a suitable nesting site has been selected. The duration of this temporary clustering period can range from several hours to several days. Scouts communicate information about prospective sites through waggle dances, and the collective activity of the scouts contributes to the final selection.
During the intermediate stop, the swarm performs thermoregulation, maintaining a relatively warm cluster core while the outer layers can remain considerably cooler. The arrangement of bees within the cluster helps reduce heat loss and conserve energy. Before departing for the new nesting site, bees warm their flight muscles to approximately 35 °C (95 °F), enabling coordinated flight. Scout bees produce worker-piping signals that stimulate other members of the cluster to prepare for take-off.
Swarming is a vulnerable time in the life of honey bees. Swarms are provisioned only with the nectar or honey they carry in their stomachs. A swarm may starve if it does not find a new nesting site and additional food resources. This risk can be particularly significant when an early swarm departs during warm spring weather followed by prolonged cold or rain. The original colony usually retains food stores and developing brood after one or more swarms have departed. However, the replacement queen may be lost to predators during her mating flight, or adverse weather may prevent successful mating. If the colony no longer contains eggs or sufficiently young larvae from which another queen can be raised, it may become permanently queenless. A cast swarm usually contains a young virgin queen.
The propensity to swarm differs among honey bee species and populations. Africanized bees are notable for their tendency to swarm or abscond. Unlike reproductive swarming, absconding occurs when the entire colony abandons its nesting site rather than dividing into separate colonies. Absconding can be associated with environmental conditions, food shortages, disturbances or unsuitable nesting conditions. Poor physical conditions, such as water entering the hive, excessive temperatures, insufficient shade or water, nearby fires and repeated disturbance, may encourage colonies to abandon their nests.
Absconding behavior has been documented in Africanized honey bees, including responses to disturbances and changes in resource availability. Colonies that abandon their nests may face substantial risks if suitable nesting sites or food sources are unavailable. In colder climates, inadequate winter food stores can also threaten colony survival, although this is not necessarily associated with absconding.
Absconding has been described in terms of different contributing conditions. Resource-related absconding may occur in response to shortages of water, pollen or nectar, whereas disturbance-related absconding may occur following predation, pest infestation or repeated disruption of the nest.
Generally, a weak bee colony is less likely to produce a reproductive swarm until its population has increased. Weak colonies may result from inadequate food supplies, diseases such as foulbrood, or a queen with a reduced rate of egg production. These conditions can affect colony growth and its capacity to reproduce through swarming.[citation needed]
A suitable nesting site for western honey bees must provide enough space to accommodate the colony and its developing combs. Studies of nest-site preferences have found that cavities with volumes of approximately 40 litres (8.8 imp gal; 11 US gal) are generally favored over substantially smaller cavities. Other important characteristics include protection from the elements, a relatively small entrance near the bottom of the cavity and a suitable degree of exposure to sunlight. The presence of abandoned honeycombs may also influence the selection of a nesting cavity, although the suitability of the cavity remains important.
Scout bees are typically experienced foragers that investigate potential nesting locations while the swarm rests in a temporary cluster. Only a minority of workers undertake nest-site scouting. An individual scout returning to the cluster promotes a location she has found. She uses the waggle dance to communicate its direction and distance, while the duration and intensity of her dancing contribute to the recruitment of other scouts. Bees recruited through these dances can visit the proposed site and subsequently advertise it if they assess it favorably.
Several sites may be promoted by different scouts at first. After several hours, and sometimes days, a favored location gradually emerges from this decision-making process. Because the swarm has limited food reserves, selecting a suitable site without excessive delay is important. Research indicates that preparations for departure begin when a sufficient number of scout bees are present at a potential nesting site, a process known as quorum sensing. Experimental observations suggest that a quorum of approximately 20–30 scouts can trigger the signals associated with preparations for departure. This process does not require every scout to agree on a single location before preparations for departure begin. The recruitment of scouts to favorable sites and the eventual reduction in advertising for alternatives contribute to the colony's collective decision.
When sufficient support has developed for a nesting location, the clustered swarm prepares to depart. Worker-piping signals and warming of flight muscles precede take-off. The swarm may fly a kilometre or more to the chosen location, with scout bees helping to guide the other workers through directional flight behavior. The collective decision-making process enables the swarm to compare potential nesting sites and coordinate its movement towards a selected location.
Beekeepers who do not wish to increase their number of active hives may use one or more methods of swarm control. Many approaches involve reducing crowding, modifying the distribution of brood and food stores, or simulating aspects of colony division.
Alternatively, swarm traps containing Nasonov pheromone lures may be used to attract reproductive swarms. These traps provide potential nesting cavities for scout bees to investigate. Beekeepers managing a colony that has already swarmed may also provide suitable young brood if the original colony has lost its replacement queen. Eggs or young larvae can allow the workers to raise another queen, provided the colony retains sufficient workers and resources.[citation needed]
Beekeepers are sometimes called to capture swarms originating from feral honey bee colonies or from managed hives. Depending on local circumstances, swarm collection services may be offered by individual beekeepers or specialist bee removal companies. Honey bee swarms can often be collected alive and relocated to suitable hive equipment. Removal becomes more complicated when the bees have already established a colony within a building or another enclosed structure. Where feasible, relocation provides an alternative to exterminating the colony.
There are various methods of capturing a swarm. When a newly emerged swarm settles and forms a compact cluster, it can sometimes be transferred to a suitable box or nuc. For accessible swarms resting on branches, beekeepers may position a container below the cluster and dislodge the bees into it. Some collection methods use a sheet beneath the cluster to provide a visible surface over which the bees can move towards the entrance of a hive box. Sugar-water sprays are also used by some beekeepers during swarm collection, although their suitability depends on the circumstances. When the queen enters the collection box, other workers may follow and gather around her. The time required for collection varies with the size of the swarm, its position and environmental conditions.
If a swarm is tightly attached to its resting place and cannot readily be transferred into a box, alternative collection equipment may be used. A skep or another suitable container can be positioned near the cluster, allowing the bees to enter it. Smoke is sometimes used during bee removal operations, although clustered swarms may respond differently to smoke than bees in an established hive. Smoke can cause a resting swarm to disperse rather than remain clustered, depending on its intensity and application.[citation needed]
A bee vac, a device designed to collect bees through controlled suction, can also be used when conventional collection methods are impractical.

A swarm of bees sometimes frightens people, although honey bees in a temporary swarm cluster are generally less defensive than those protecting an established nest. This is partly because the swarm has no brood or established comb to defend and is primarily engaged in finding a suitable nesting location. Nevertheless, swarming bees can sting when disturbed or threatened, and their behavior may vary according to colony characteristics and environmental conditions. Swarm clusters hanging from tree branches or other surfaces often move to another location after scouts have selected a nesting site.
Encountering a bee swarm for the first time can be alarming, particularly in urban areas. Swarms may cluster on trees, buildings, vehicles or other structures. The presence of a temporary swarm does not necessarily indicate that a permanent nest is located nearby, because the colony may have traveled from its original hive. Swarms are generally less likely to exhibit defensive behavior when left undisturbed. Where a swarm creates a safety concern, professional or experienced beekeeper assistance may be appropriate.
Human activities can also affect bee habitats and the availability of nesting sites. Urban expansion, changes in land use, and the removal of mature trees may alter the availability of nesting cavities and floral resources. Research involving other groups of bees, including stingless bees, has documented effects of habitat disturbance and fragmentation on their communities, although these findings cannot necessarily be applied directly to honey bee swarming. Agricultural practices, pesticide exposure and changing vegetation patterns may further influence bee foraging opportunities and the resources available to colonies.
Urbanization is a major form of human-induced environmental change that can influence bee communities through modifications to habitat structure, floral resources and nesting opportunities. Its effects differ among bee species and across geographic locations. For example, research on urban dry grasslands has reported reduced wild bee and butterfly diversity with increasing urbanization.
Other studies have found that urban areas can provide important habitats for bees and support pollination activity. The availability of gardens, parks, urban vegetation and managed hives can contribute to the presence of bees within cities. However, findings concerning overall bee abundance and diversity should not be interpreted as evidence that every bee species benefits from urbanization.
Urbanization may also affect honey bees through changes in exposure to pathogens and parasites. A study comparing feral and managed honey bees found that urbanization was associated with increased pathogen pressure, indicating that urban environments may alter some of the disease-related challenges experienced by colonies.
The parasitic mite Varroa destructor and the microsporidian Nosema ceranae are among the organisms associated with honey bee health problems. Their occurrence, however, does not establish that urbanization alone causes colony losses. Habitat modification and fragmentation may also influence bee populations by altering food resources and nesting opportunities. Research on stingless bees has demonstrated effects of human disturbance and habitat fragmentation, although the ecological responses of these bees may differ from those of honey bees.
Urban environments may also be associated with differences in the genetic composition of honey bee populations. Such differences do not necessarily mean that urban conditions directly cause genetic changes in individual bees. Rather, they can reflect population structure, colony management, reproduction and the movement of bees between habitats. A study by Patenković et al. compared genetic variation among feral and managed honey bees in urban and rural environments and identified differences among the sampled populations.
Honey bees are commonly maintained in managed apiaries, but unmanaged or feral colonies can also establish nests in natural cavities and human-made structures. The spread of Varroa destructor and associated diseases has raised concerns about the long-term persistence of unmanaged western honey bee populations in some regions. Nevertheless, research has documented feral colonies surviving in urban environments.
A study by Bila Dubaić et al. investigated the occurrence of unmanaged honey bees in Belgrade, Serbia, using reports collected between 2011 and 2017. The researchers compiled more than 1,300 records of honey bee occurrences, including reports of swarms, established colonies and observations that could not be clearly classified. Following the removal of duplicate observations, the dataset included 537 swarm reports and 460 colony reports.
The analysis indicated that reported occurrences of unmanaged honey bees were associated with areas of higher human population density. Many swarms and established colonies were found on or within urban structures. The study also documented locations where unmanaged colonies appeared to persist over multiple years, providing evidence that some feral colonies could survive in a heavily urbanized setting.
The researchers considered whether the observed swarms originated from established feral populations or from nearby managed apiaries. They noted that managed beekeeping was relatively uncommon within parts of central Belgrade and suggested that a substantial proportion of the observed colonies may have belonged to a persistent feral population. However, the origins of individual swarms could not always be established from the available observations.
Genetic diversity among honey bee populations can be studied by comparing feral colonies, managed colonies and populations occurring in different environments. Such comparisons can provide information about breeding patterns, dispersal and the relationships between managed and unmanaged bee populations.
An analysis by Patenković et al. examined genetic diversity among honey bees in urban and rural settings. The researchers reported differences between urban feral bees, urban managed colonies and rural populations. The results suggested that honey bee populations occupying the same general urban environment were not necessarily genetically uniform.
Differences in genetic composition may be influenced by several factors, including the breeding and management of domestic colonies, the establishment of feral populations and the exchange of genetic material between colonies. The genetic diversity of unmanaged colonies may also reflect their population history and the origins of the swarms that established them.
The study proposed that urban habitats may provide environmental conditions that allow some feral honey bee populations to persist. Potential factors include the availability of nesting structures and floral resources. However, observations of genetic differences alone do not establish which environmental factors caused those differences, or whether urban populations are necessarily more genetically diverse than rural populations in other geographic regions.
Overall, urban areas can provide nesting and foraging opportunities for honey bees, although the suitability of these environments varies. Research on feral colonies, swarm occurrence and genetic diversity contributes to understanding how honey bee populations persist and reproduce in landscapes influenced by human activity.