| ampere-hour | |
|---|---|
Rechargeable NiMH 1.2 V batteries Top: AA battery (2500 mA⋅h) Bottom: AAA battery (1000 mA⋅h) | |
| General information | |
| Unit system | Non-SI metric unit |
| Unit of | Electric charge |
| Symbol | A⋅h, A h |
| Conversions | |
| 1 A⋅h in ... | ... is equal to ... |
| SI units | 3600 C |
An ampere-hour or amp-hour (symbol: A⋅h or A h, often simplified as Ah) is a unit of electric charge, recommended for use in batteries (in specifying their capacity) and electrolytic devices. It has dimensions of electric current multiplied by time and corresponds to the charge transferred by a steady current of one ampere flowing for one hour (3,600 seconds). Thus 1 A⋅h equals 3600 A⋅s or 3.6 kC (kilocoulombs).
The commonly seen milliampere-hour (symbol: mA⋅h or mA h, often simplified as mAh) is one-thousandth of an ampere-hour (3.6 C).
These examples demonstrate the simple mathematical relationship. In practical usage there are far more factors to consider – see below.
*Ampere-hours are a measurement of charge, not a measurement of application. The above examples are a useful reference, but in practice the usable output is not identical, and can vary greatly. For instance:
The ampere-hour is frequently used in measurements of electrochemical systems such as electroplating and for battery capacity where the commonly known nominal voltage is understood.
A milliampere second (mA⋅s) is a unit of measurement used in X-ray imaging, diagnostic imaging, and radiation therapy. It is equivalent to a millicoulomb. This quantity is proportional to the total X-ray energy produced by a given X-ray tube operated at a particular voltage. The same total dose can be delivered in different time periods depending on the X-ray tube current.
To help express energy, computation over charge values in ampere-hour requires precise data of voltage: in a battery system, for example, accurate calculation of the energy delivered requires integration of the power delivered (product of instantaneous voltage and instantaneous current) over the discharge interval. Generally, the battery voltage varies during discharge; an average value or nominal value may be used to approximate the integration of power.
When comparing the energy capacities of battery-based products that might have different internal cell chemistries or cell configurations, a simple ampere-hour rating is often insufficient.
One ampere-hour is equal to (up to 4 significant figures):
Many people buying or comparing batteries are not familiar with electrical concepts, which can lead to confusion between ampere-hours and watt-hours.[citation needed]
Amperes only measure current, not power. To calculate power, the current in amperes is multiplied by the voltage in volts to provide power in watts.
In other words, a 1 A·h (1000 mA·h) 1.5 V battery provides much less power than a 1 A·h 12 V battery.[dubious – discuss]