Glossary of bowling

This glossary relates mainly to terms applicable to tenpin bowling. For candlepin terms, see Candlepin bowling#Terminology.
An 1892 glossary of bowling terms from a publication of Spalding's Athletic Library The glossary mentions "all three balls", in contrast to modern ten-pin bowling in which two ball rolls are allowed in each frame.

Numerical

Lines corresponding to angles of entry for 2°, 4° and 6°. Hooking (curving) the ball enables greater angles of entry, which increases likelihood of strikes.
Spots (at 6 feet), arrows (at 15 feet), and downlane markers (at about 34-43 feet) can be used for targeting (aiming).

Symbols

A

Bowling ball core ("weight block") technical specifications include RG, differential of RG, intermediate differential, and (a)symmetry. Asymmetric balls have non-zero values of intermediate differential.
Axis rotation:
Three angles of axis rotation (blue arrows) relative to a line parallel to the boards. Brown arrows indicate direction of overall ball motion.
(top views).
Axis tilt:
Three angles of axis tilt (blue axes) relative to the horizontal. Black lines on balls simulate ring-shaped oil tracks (initial contact with lane).
(views from behind).

B

A backup ball delivery causes the ball to hook in a direction opposite that of a conventional delivery. Shown: left-handed delivery by Eric Jones hooks from right to left.
A bowler using a high backswing
A ball's average speed can be estimated based on its time of travel over the sixty feet from the foul line to the headpin. Because of friction, a ball's speed decreases between release and reaching the pins.
Bracket: a partially-completed tree diagram representing pairings in a 16-player single-elimination tournament

C

A house ball with a conventional grip: large, non-customized finger holes are relatively close to the thumb hole compared to balls with fingertip grip.
Conceptual diagram of bowling ball cores
Timeline of ball coverstock technology

D

One-handed (conventional) delivery
One-handed deliveries generally involve the thumb and two fingers of one hand. Hand rotation surrounding the instant of delivery can induce axis rotation (side rotation), causing the ball to hook (curve). Shown: E.J. Tackett, 2019.
A conventional (one-handed) delivery. Shown: John Furey, 2024.
In most two-handed deliveries, the last moment of the release involves only one hand. Since the thumb is never inserted, strong axis rotation and hooking can be achieved. Shown: Kyle Troup, 2022.

E

F

A custom-drilled ball with a fingertip grip; finger holes are relatively far from the thumb hole, compared to balls having a conventional grip.
Example of a foul (left foot crosses foul line)

G

The texture of ball surfaces—measured in "grit" of abrasives used—affects ball path (skid distance and hook intensity).
Handicap scoring: Though the second bowler's scratch score 183 is higher than the first bowler's scratch score 181, the first bowler's higher handicap (58 vs. 53) causes his total 239 to exceed the second bowler's total 236.

H

The hook is the second of three phases of ball motion. (Horizontal scale is compressed)
A ball's motion, especially its hook, is governed by several factors.

I

Terms describing deviations from an ideal bowling ball path

K

L

A ball with a pin up layout (red "pin" is above finger holes)
E. J. Tackett lofts the ball over the left gutter.

M

Bowlers are said to be matched up when they optimize their release ratio—ratio of a ball's speed and rev rate at time of release—so that the ball achieves full traction immediately before contacting the pins to maximize the useful energy of impact.

N

O

Conceptual diagrams of two oil patterns (typical house shot, and sport pattern)
(Horizontal scale is compressed)
Accumulated oil clogs the pores of reactive resin balls, reducing their frictional characteristics. Shown: lane oil and dirt removed from a reactive ball after twelve games.
Terms describing deviations from an ideal bowling ball path

P

An 1895 artistic portrayal of pin scatter with a two-hole bowling ball of the era
Ideal pin scatter: Ball contacts the 1, 3, 5 and 9 pins (sequentially tinted red) to achieve what some call a perfect strike.
The number of sanctioned perfect games per league bowler has increased substantially since the 1990s. Freeman and Hatfield posit that the increase in perfect games is due to factors such as the introduction of reactive resin coverstocks, asymmetric ball cores, synthetic lane surfaces, and precision lane oiling machines.
"Perfect strike": ball impacts the pocket at "board 17.5"—found by a USBC pin-carry study to maximize strike probability.
A "perfect" 300 score: twelve consecutive strikes in the same game
An "Andy Varipapa 300" (highlighted in yellow) split between two games
Front view: ball impacts the pocket at "board 17.5"—found by a USBC pin-carry study to maximize strike probability. The ideal impact point is closer to the center of the head pin than most people think.
A USBC pin carry study found "board 17.5" to be the ideal pocket location to achieve a strike, with higher entry angles (shown) and heavier balls (not graphed) generally providing greater chances of striking.
The pitch (angle) at which thumb and finger holes are drilled−either forward or reverse—helps to regulate how a ball is released. Lateral pitch angles (perpendicular to this diagram) are also custom fit.

Q

R

Conceptual illustration of ball speed and rev rate during the skid and hook phases, until they converge upon entering the roll phase. The initial ratio of ball speed to rev rate—the ratio at the time of release—is called the release ratio. Rev rate increases (motion of yellow arrowheads) until it matches the decreasing ball speed upon entering the roll phase.
The so-called "Rule of 31"—actually an informal guideline—calculates the approximate board on which a ball should exit a particular oil pattern based on the length of the pattern, in order to achieve a strike.

S

Margins of error for spares
The margin for error in converting same-row splits is about 1.25 inches (3.2 cm). Using a hook (to increase entry angle) increases this figure slightly.
Margin for error for converting a single-pin spare: balls rolled outside a range of about 13.25 inches (33.7 cm) will miss.
Because the 10-pin is located close to the gutter, the range of success is smaller, about 9.375 inches (23.81 cm).
Though bowling scores are generally linearly proportional to strike frequency, there is substantial variance based on whether the strikes are consecutive, and based on the number of open frames versus spares. In this dataset, such variance can approach 90 pins per set (30 pins per game), shown by the vertical extent of the shaded bar.
Spare-related terms: (Terms assume a right hand release, and white numbers represent standing pins.)
Dinner bucket
Bucket if missing 8-pin
Double wood left
or Sleeper #1
Double wood right
or Sleeper #2
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
Baby splitChristmas tree #1Christmas tree #2
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
Big FourGreek Church (Big Five)Goal (Fence- or Bed-) posts
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
Dime store #1Dime store #2Lily, Sour apple
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
Washout #1Washout #2Modern (Super) Washout
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
7 8 9 10
4 5 6
2 3
1
Attempts to convert the 4-5-7 split (right-handed delivery using pearl coverstock bowling ball). Ball approaches at an angle to give the 4-pin enough forward momentum to contact the 7-pin. However, splitting the 4-5 gap too evenly sends the 4-pin sideways toward the gutter without contacting the 7-pin.
Conceptual diagram of a sport pattern
(Horizontal scale is compressed)
Spots (at 6 feet), arrows (at 15 feet), and downlane markers (at about 34-43 feet) can be used for targeting (aiming).
String pinsetter operation, from a patent issued in 2024
1) Ball approaches pins that strings have lowered into place.
2) Ball knocks pins into a pit and exits to a ball return mechanism.
3) Strings retract the pins from the pit so they can be lowered into place.
External video
video icon YouTube short: String pinsetter operation
Bowling ball core ("weight block") technical specifications include RG, differential of RG, intermediate differential, and (a)symmetry. Symmetric balls do not have values of intermediate differential.

T

Adjusting screws placed on the sides of these circa 1895 bowling lanes design allow adjustment of lane topography.

Conceptual diagram of a professional tournament. Entrants not eliminated in qualifying rounds go on to compete in match play, which determines seeding (initial ranking) for the final matches, which in PBA tournaments have often been televised stepladder finals.
Track flare is progression of the ball's oil track (simulated in blue) reflecting migration of the ball's axis of rotation on successive revolutions.
Conceptual diagram of a typical house shot (THS) oil pattern
(Horizontal scale is compressed)

U

V

W

X

Y

Examples of historic bowling glossaries
"Technical Terms" from a Bowler's Guide published in New York in 1890, when "innings" or "rolls" consisted of three balls played in succession.
"Definition of Terms" in Spalding's Official Bowling Guide (1903), by which time only two rolls per frame were allowed

Other sources