CCOR-2

CCOR-2 (Compact CORonograph 2) is the second space coronograph of Compact Coronograph series. It is located aboard SOLAR-1 spacecraft placed at Lagrange 1 point – about 1.5 million kilometers (~930,000 miles) from the Earth towards the Sun. It will orbit the Sun at a distance between 0.974 and 1.006 AU.

It was launched in September 2025 from Florida.

Mission

CCOR-2 will provide low latency, high cadence visible light images of solar corona and its surroundings. It will observe coronal mass ejections (CME) that are potentially dangerous to electronic infrastructure and because of that its data is going to be used for space weather forecasting. CCOR coronographs are descendants of aging SOHO/LASCO and STEREO/COR instruments.

It was primarily made for National Oceanic and Atmospheric Administration and Space Weather Prediction Center.

Parameters and technical data

CCOR-2 was developed by US Naval Research Laboratory in Washington D.C. It has a length of about 72 centimeters (28.3 in) and its name highlights a small size of the instrument. It features a 2048×1920 pixels Active Pixel Sensor detector which detects wavelengths in the range of ~450 nm to ~750 nm.

The instrument has to follow several requirements, listed below.

• A spatial resolution of ≤70 arcseconds
• Inner FOV geometric cutoff at 3.0 solar radii (${\displaystyle R_{\odot }}$)
• Outer FOV at 20 ${\displaystyle R_{\odot }}$or better
• A signal to noise ratio of 10 in the region between 4.4 ${\displaystyle R_{\odot }}$ and 22.7 ${\displaystyle R_{\odot }}$ (1.17° to 6.05°)
• Maximum image latency of 30 minutes
• CME mass estimate with an error of ≤50 per cent for CMEs with mass between ${\displaystyle 1.0\times 10^{7}}$kg and ${\displaystyle 5.0\times 10^{14}}$kg
• A closable outer door
• Full resolution image cadence of 15 minutes or 5 minutes for 2x2 binned images.
• Minimum signal intensity above noise of ${\displaystyle \geq 1.0\times 10^{-11}}$ ${\displaystyle B_{\odot }}$ (${\displaystyle B_{\odot }}$ is solar surface brightness – about -10.6 mag/arcsec²)
• Coronal brightness measurement with error up to 10%
• CME velocity estimate with biggest allowed error of 5% in the range of 200 km/s to 3400 km/s
• At least five years of operations with resources enough for additional five years (requirement for entire spacecraft)
• CCOR-2 shall be able to meet all the requirements when observing during an X50 solar flare or S4 class solar storm
• Observing in visible light
• The data must be available for SWPC reach within 30 minutes of its creation
• CCOR shall be capable of surviving 5 years on orbit before start of operations

  

Actual specifications

Parameter	Value
Mass	25 kg (55.1 lb) – entire instrument
Mass of Power Supply Box	2.2 kg (4.9 lb)
Power	22.5 watts
Pixel size	10 µm × 10 µm
Detector pixel array	2048 by 1920 pixels
Imaging pixels	2038 by 1910 pixels
Inner FOV geometric cutoff	3.0 ${\displaystyle R_{\odot }}$
S/N ratio of ≥1 starting at	3.5 ${\displaystyle R_{\odot }}$
Outer FOV (sides, diagonal)	22.5 ${\displaystyle R_{\odot }}$, 26.3 ${\displaystyle R_{\odot }}$
Resolution	65 arcseconds
FOV with that resolution	4 ${\displaystyle R_{\odot }}$ to 22 ${\displaystyle R_{\odot }}$
Focal length	85.17 mm
Plate scale	24.27 arcseconds/pixel
Amount of occulting disks (all glued together to form a single one)	24
FWHM bandpass	469 nm – 755 nm
F-number	5.32
Cadence of full resolution images	15 minutes
Latency	≤15 minutes
Data rate	38.7 kbps

CCOR-2 images are available in FITS format, however they are processed do different data processing levels on the ground.

The first level of the images is L0 CCSDS which is a raw readout of detector pixels. L0 CCSDS is then rotated so solar north points upwards which creates a L0B file.

Level 1A image is formed using L0B file by converting DN value of pixel into Mean Solar Brightness unit, division by exposure time, correcting for vignetting and detector linearity rectification. It is the main operational product used for forecasting.

A median background is created from L1 by computing F-corona and stray-light based of the image. L1A with background subtraction, distortion correction application and flat field rectification creates L2 image.

CCOR-2 data is available to the public since 17 June 2026, 15 days after it passed its Provisional-maturity Product Validation Review.

Comet discoveries

A small Kreutz sungrazer was found in the CCOR-2 coronograph images late on 29 June 2026. The discoverer of the object is Michael Stark.

References

External links

• Archive of CCOR-2 data
• Realtime data access
• Archive of CCOR-2 data and Read Me document