CF dye

CF dyes (trademarked as CF Dyes by Biotium) are a class of fluorescent dyes developed for biological research applications, including fluorescence microscopy, flow cytometry, and in vivo imaging. First introduced in the late 2000s, these dyes are characterized by a chemical strategy combining pegylation with sulfonation to achieve high water solubility while minimizing non-specific binding.

Varieties include 42 fluorophores spanning excitation wavelengths from 347 nm (ultraviolet) to 876 nm (near-infrared), built on four core chemical scaffolds: coumarin, pyrene, rhodamine, and cyanine. These dyes have been used in super-resolution microscopy, where several variants have been validated for techniques including STORM, MINFLUX, and STED microscopy.

History and development

Development began around 2007 in response to limitations observed in existing commercial fluorophores, particularly the tendency of heavily sulfonated dyes to exhibit non-specific binding to positively charged cellular components. To address these issues, researchers developed a design strategy combining sulfonation with polyethylene glycol (PEG) modification, the details of which are described in a 2014 U.S. patent.

In 2009, researchers reported the development of a rhodamine–imidazole substitution strategy in which the benzene ring commonly used for conjugation was replaced with an imidazolium group. This modification produced a red shift in emission wavelength while preserving the photostability of the rhodamine xanthene core, extending the usable spectral range of rhodamine dyes toward the near-infrared region.

In 2022, a collaboration with researchers at UC Berkeley yielded CF583R and CF597R, which are rhodamine-based dyes optimized for STORM microscopy.

Chemistry

CF dyes are synthesized through chemical modifications of established coumarin, rhodamine, and cyanine dye scaffolds. The dyes employ a dual strategy of sulfonation and pegylation. Sulfonation introduces sulfonate groups (–SO₃⁻) to improve water solubility, while pegylation adds polyethylene glycol (PEG) chains that sterically shield charged groups and reduce dye aggregation.

The PEG moieties inhibit π-stacking between adjacent dye molecules, reducing H-aggregate formation. H-aggregation is a cause of fluorescence quenching when multiple dye molecules are attached to a single antibody, limiting the useful degree of labeling (DOL) in antibody conjugates.

Rhodamine-based near-infrared CF dyes (designated with an "R" suffix) utilize rhodamine–imidazole substitution chemistry, as described in Wang et al. (2022), to extend emission wavelengths beyond the traditional ~600 nm limit while retaining the photostability characteristic of the rhodamine scaffold. The rigid xanthene core of rhodamines confers resistance to photobleaching relative to the flexible polymethine bridge found in cyanine dyes.

Applications

Applications include immunofluorescence microscopy, flow cytometry, western blotting, in vivo imaging, fluorescence in situ hybridization, expansion microscopy, and apoptosis detection.

Super-resolution microscopy

The dyes have been evaluated in peer-reviewed studies for use in super-resolution microscopy techniques. A systematic evaluation of 28 commercial dyes by Lehmann and colleagues (2016) identified CF647 and CF680 as an optimal dye pair for spectral demixing-based, registration-free multicolor dSTORM in combination with CF568, due to low spectral crosstalk. CF583R and CF597R enable localization precision of approximately 10 nm laterally and 20 nm axially.

Research from Diekmann and colleagues at EMBL demonstrated that CF660C exhibits photostability during extended imaging sessions, enabling acquisition of approximately one million frames covering entire mitotic cells (40 × 40 × 6 μm volumes). CF640R and CF680R have been validated for stimulated emission depletion (STED) microscopy. Several dyes have been employed in structured illumination microscopy (SIM). CF660C and CF680 have been validated for MINFLUX nanoscopy using standard GLOX+MEA photoswitching buffers.

Representative spectral and validation data

Spectral properties and reported super-resolution validations for selected CF dyes
DyeEx (nm)Em (nm)ε (M⁻¹cm⁻¹)Notes
CF35034744818,000UV excitable
CF405S40443133,000405 nm excitable
CF405M40845241,000405 nm excitable
CF405L39554524,000405 nm excitable, large Stokes shift
CF43042649840,000405 nm excitable, green emission
CF44044051540,000405 nm excitable, green emission
CF45045053840,000
CF488A49051570,000Validated for STORM, TIRF
CF503R50354290,000
CF514514~530105,000
CF532532~55096,000
CF535ST53556895,000Rhodamine-based; designed for STORM
CF543543~560100,000
CF550R550~570100,000
CF555555565150,000
CF568562583100,000Validated for STORM
CF570570~590150,000
CF583583606150,000
CF583R586609100,000Rhodamine-based; validated for STORM
CF594593614115,000
CF597R597619115,000Validated for STORM
CF620R620~642115,000
CF633630~650100,000
CF640R642662105,000Rhodamine-based; validated for STED
CF647650665240,000Validated for STORM
CF647Plus652668240,000
CF660C667685200,000Validated for STORM, MINFLUX
CF660R660682100,000Rhodamine-based
CF680681698210,000Validated for STORM
CF680R680701140,000Rhodamine-based; validated for STED
CF700696~719240,000
CF710712736115,000
CF725729750120,000
CF740~740~760105,000Rhodamine-based
CF750755777250,000Validated for STORM
CF770770797220,000
CF790784806210,000
CF800797816210,000
CF820822835253,000
CF850852870—
CF870876896—
RPE-Astral™616496, 546, 566617—FRET tandem dye for flow cytometry
RPE-Astral™775496, 546, 565774—FRET tandem dye for flow cytometry
APC-Astral™813633, 638813—FRET tandem dye for flow cytometry

Patents

Key patents covering CF Dye technology include US8709830B2 ("Fluorescent dyes, fluorescent dye kits, and methods of preparing labeled molecules"), EP2223086B1 (priority date 2007), and international application WO2012129128A1.

See also