Fourier transform of the probability density function
The characteristic function of a uniform U(–1,1) random variable. This function is real-valued because it corresponds to a random variable that is symmetric around the origin; however characteristic functions may generally be complex-valued.
The characteristic function always exists when treated as a function of a real-valued argument, unlike the moment-generating function. There are relations between the behavior of the characteristic function of a distribution and properties of the distribution, such as the existence of moments and the existence of a density function.
Introduction
The characteristic function is a way to describe a random variableX.
The characteristic function,
a function of t,
determines the behavior and properties of the probability distribution of X.
It is equivalent to a probability density function (if it exists) or cumulative distribution function, in the sense that knowing one of these functions allows computation of the others, but they provide different insights into the features of the random variable.
In particular cases, one or another of these equivalent functions may be easier to represent in terms of simple standard functions.
If a random variable admits a density function, then the characteristic function is its Fourier dual, in the sense that each of them is a Fourier transform of the other. If a random variable has a moment-generating function, then the domain of the characteristic function can be extended to the complex plane, and
Note however that the characteristic function of a distribution is well defined for all real values of t, even when the moment-generating function is not well defined for all real values of t.
The characteristic function approach is particularly useful in analysis of linear combinations of independent random variables: a classical proof of the Central Limit Theorem uses characteristic functions and Lévy's continuity theorem. Another important application is to the theory of the decomposability of random variables.
Definition
Let be a real-valued random variable. Its characteristic function is defined for each as the expected value of , where is the imaginary unit.In the equalities, there is the cumulative distribution function, the inverse cumulative distribution function (also called the quantile function), and the density function. The integrals are in the Riemann–Stieltjes sense. The last equality holds if exists, which then implies that is its Fourier transform with sign reversal in the complex exponential. The convention for the constant appearing in the above definition differs from the usual convention for the Fourier transform. For example, some authors define , which is essentially a change of parameter. Other notation may be encountered in the literature: as the characteristic function for a probability measure , or as the characteristic function corresponding to a density .
Generalizations
The notion of characteristic functions generalizes to multivariate random variables and more complicated random elements. The argument of the characteristic function will always belong to the continuous dual of the space where the random variable X takes its values. For common cases such definitions are listed below:
If X is a k-dimensional random vector, then for t ∈ Rk where is the transpose of the vector ,
If X is a k × p-dimensional random matrix, then for t ∈ Rk×p where is the trace operator,
Oberhettinger (1973) provides extensive tables of characteristic functions.
Properties
The characteristic function of a real-valued random variable always exists, since it is an integral of a bounded continuous function over a space whose measure is finite.
It is non-vanishing in a region around zero: φ(0) = 1.
It is bounded: |φ(t)| ≤ 1.
It is Hermitian: φ(−t) = φ(t). In particular, the characteristic function of a symmetric (around the origin) random variable is real-valued and even.
There is a bijection between probability distributions and characteristic functions on , . That is, for any two random variables X1, X2, with values in , both have the same probability distribution if and only if .
If a random variable X has moments up to k-th order, then the characteristic function φX is k times continuously differentiable on the entire real line. In this case
If a characteristic function φX has a k-th derivative at zero, then the random variable X has all moments up to k if k is even, but only up to k – 1 if k is odd.
If X1, ..., Xn are independent random variables, and a1, ..., an are some constants, then the characteristic function of the linear combination of the Xi variables is One specific case is the sum of two independent random variables X1 and X2 in which case one has
Let and be two random variables with characteristic functions and . and are independent if and only if .
The tail behavior of the characteristic function determines the smoothness of the corresponding density function.
Let the random variable be the linear transformation of a random variable . The characteristic function of is . For random vectors and (where A is a constant matrix and B a constant vector), we have .
Continuity
The bijection stated above between probability distributions and characteristic functions is sequentially continuous. That is, whenever a sequence of distribution functions Fj(x) converges (weakly) to some distribution F(x), the corresponding sequence of characteristic functions φj(t) will also converge, and the limit φ(t) will correspond to the characteristic function of law F. More formally, this is stated as
Lévy’s continuity theorem: A sequence Xj of n-variate random variables converges in distribution to random variable X if and only if the sequence φXj converges pointwise to a function φ which is continuous at the origin. Where φ is the characteristic function of X.
There is a one-to-one correspondence between cumulative distribution functions and characteristic functions, so it is possible to find one of these functions if we know the other. The formula in the definition of characteristic function allows us to compute φ when we know the distribution function F (or density f). If, on the other hand, we know the characteristic function φ and want to find the corresponding distribution function, then one of the following inversion theorems can be used.
Theorem. If the characteristic function φX of a random variable X is integrable, then FX is absolutely continuous, and therefore X has a probability density function. In the univariate case (i.e. when X is scalar-valued) the density function is given by
Theorem (Lévy). If φX is characteristic function of distribution function FX, two points a < b are such that {x | a < x < b} is a continuity set of μX (in the univariate case this condition is equivalent to continuity of FX at points a and b), then
If X is scalar: This formula can be re-stated in a form more convenient for numerical computation as For a random variable bounded from below one can obtain by taking such that Otherwise, if a random variable is not bounded from below, the limit for gives , but is numerically impractical.
If X is a vector random variable:
Theorem. If a is (possibly) an atom of X (in the univariate case this means a point of discontinuity of FX) then
If X is scalar:
If X is a vector random variable:
Theorem (Gil-Pelaez). For a univariate random variable X, if x is a continuity point of FX then
where the imaginary part of a complex number is given by .
Inversion formulas for multivariate distributions are available.
Criteria for characteristic functions
The set of all characteristic functions is closed under certain operations:
A convex linear combination (with ) of a finite or a countable number of characteristic functions is also a characteristic function.
The product of a finite number of characteristic functions is also a characteristic function. The same holds for an infinite product provided that it converges to a function continuous at the origin.
If φ is a characteristic function and α is a real number, then , Re(φ), |φ|2, and φ(αt) are also characteristic functions.
It is well known that any non-decreasing càdlàg function F with limits F(−∞) = 0, F(+∞) = 1 corresponds to a cumulative distribution function of some random variable. There is also interest in finding similar simple criteria for when a given function φ could be the characteristic function of some random variable. The central result here is Bochner’s theorem, although its usefulness is limited because the main condition of the theorem, non-negative definiteness, is very hard to verify. Other theorems also exist, such as Khinchine’s, Mathias’s, or Cramér’s, although their application is just as difficult. Pólya’s theorem, on the other hand, provides a very simple convexity condition which is sufficient but not necessary. Characteristic functions which satisfy this condition are called Pólya-type.
Bochner’s theorem. An arbitrary function φ: Rn → C is the characteristic function of some random variable if and only if φ is positive definite, continuous at the origin, and if φ(0) = 1.
Khinchine’s criterion. A complex-valued, absolutely continuous function φ, with φ(0) = 1, is a characteristic function if and only if it admits the representation
Mathias’ theorem. A real-valued, even, continuous, absolutely integrable function φ, with φ(0) = 1, is a characteristic function if and only if
for n = 0,1,2,..., and all p > 0. Here H2n denotes the Hermite polynomial of degree 2n.
Pólya’s theorem can be used to construct an example of two random variables whose characteristic functions coincide over a finite interval but are different elsewhere.
Pólya’s theorem. If is a real-valued, even, continuous function which satisfies the conditions
then φ(t) is the characteristic function of an absolutely continuous distribution symmetric about 0.
Uses
Because of the continuity theorem, characteristic functions are used in the most frequently seen proof of the central limit theorem. The main technique involved in making calculations with a characteristic function is recognizing the function as the characteristic function of a particular distribution.
Basic manipulations of distributions
Characteristic functions are particularly useful for dealing with linear functions of independent random variables. For example, if X1, X2, ..., Xn is a sequence of independent (and not necessarily identically distributed) random variables, and
where the ai are constants, then the characteristic function for Sn is given by
In particular, φX+Y(t) = φX(t)φY(t). To see this, write out the definition of characteristic function:
The independence of X and Y is required to establish the equality of the third and fourth expressions.
Another special case of interest for identically distributed random variables is when ai = 1 / n and then Sn is the sample mean. In this case, writing X for the mean,
Moments
Characteristic functions can also be used to find moments of a random variable. Provided that the n-th moment exists, the characteristic function can be differentiated n times:
This can be formally written using the derivatives of the Dirac delta function:which allows a formal solution to the moment problem.
For example, suppose X has a standard Cauchy distribution. Then φX(t) = e−|t|. This is not differentiable at t = 0, showing that the Cauchy distribution has no expectation. Also, the characteristic function of the sample mean X of nindependent observations has characteristic function φX(t) = (e−|t|/n)n = e−|t|, using the result from the previous section. This is the characteristic function of the standard Cauchy distribution: thus, the sample mean has the same distribution as the population itself.
A similar calculation shows and is easier to carry out than applying the definition of expectation and using integration by parts to evaluate .
The logarithm of a characteristic function is a cumulant generating function, which is useful for finding cumulants; some instead define the cumulant generating function as the logarithm of the moment-generating function, and call the logarithm of the characteristic function the second cumulant generating function.
Data analysis
Characteristic functions can be used as part of procedures for fitting probability distributions to samples of data. Cases where this provides a practicable option compared to other possibilities include fitting the stable distribution since closed form expressions for the density are not available which makes implementation of maximum likelihood estimation difficult. Estimation procedures are available which match the theoretical characteristic function to the empirical characteristic function, calculated from the data. Paulson et al. (1975) and Heathcote (1977) provide some theoretical background for such an estimation procedure. In addition, Yu (2004) describes applications of empirical characteristic functions to fit time series models where likelihood procedures are impractical. Empirical characteristic functions have also been used by Ansari et al. (2020) and Li et al. (2020) for training generative adversarial networks.
As defined above, the argument of the characteristic function is treated as a real number: however, certain aspects of the theory of characteristic functions are advanced by extending the definition into the complex plane by analytic continuation, in cases where this is possible.
Characteristic function of a random variable with values in a locally compact Abelian group
Let be a locally compact Abelian group, let be its character group, and let the value of a character at an element . Let be a random variable with values in , and let be its distribution. The characteristic function of the random variable (distribution ) is defined by
where P(t) denotes the continuous Fourier transform of the probability density function p(x). Likewise, p(x) may be recovered from φX(t) through the inverse Fourier transform:
Indeed, even when the random variable does not have a density, the characteristic function may be seen as the Fourier transform of the measure corresponding to the random variable.
↑Shaw, W. T.; McCabe, J. (2009). "Monte Carlo sampling given a Characteristic Function: Quantile Mechanics in Momentum Space". arXiv:0903.1592 [q-fin.CP].
↑Feldman, Gennadiy (2025-10-03). "Characterization of Probability Distributions on Locally Compact Abelian Groups by the Property of Identical Distribution of Linear Forms with Random Coefficients". arXiv:2510.02633 [math.PR].
Sources
Andersen, H.H.; Højbjerre, M.; Sørensen, D.; Eriksen, P.S. (1995). Linear and graphical models for the multivariate complex normal distribution. Lecture Notes in Statistics 101. New York: Springer-Verlag. ISBN978-0-387-94521-7.
Billingsley, Patrick (1995). Probability and measure (3rded.). John Wiley & Sons. ISBN978-0-471-00710-4.
Bisgaard, T. M.; Sasvári, Z. (2000). Characteristic functions and moment sequences. Nova Science.
Bochner, Salomon (1955). Harmonic analysis and the theory of probability. University of California Press.
Oberhettinger, Fritz (1973). Fourier transforms of distributions and their inverses; a collection of tables. New York: Academic Press. ISBN9780125236508.
Parthasarathy, K. R. (1967). Probability measures on metric spaces. Probability and Mathematical Statistics. New York — London: Academic Press. ISBN978-0-12-545850-4.
Paulson, A.S.; Holcomb, E.W.; Leitch, R.A. (1975). "The estimation of the parameters of the stable laws". Biometrika. 62 (1): 163–170. doi:10.1093/biomet/62.1.163.
Pinsky, Mark (2002). Introduction to Fourier analysis and wavelets. Brooks/Cole. ISBN978-0-534-37660-4.