Elixir Aircraft Elixir

Elixir
The Elixir
General information
TypeLight aircraft
National origin
France
ManufacturerElixir Aircraft
Primary usersATO & FTO
Flying clubs, private pilots
History
Introduction date
20 March 2020
First flight31 August 2017

The Elixir is a French two-seat, fixed-tricycle gear general aviation airplane, designed and manufactured by Elixir Aircraft in La Rochelle The aircraft is certified CS-23 by the European Aviation Safety Agency since 2020 and received the FAR Part-23 certification by the FAA during EAA AirVenture ("Oshkosh") 2025.

Intended primarily for flight training and personal touring, the Elixir is notable for its Carbon "OneShot" technology, which uses Carbon Fiber to mold the entire wing and fuselage components in single pieces, significantly reducing the number of parts compared to traditional aircraft.

Design and development

Development

Elixir Aircraft was founded in 2015 with the goal of creating a fourth-generation aircraft that addressed the complexity and aging fleet issues of traditional general aviation. The prototype first flew in 2017 from La Rochelle Airport. After extensive testing, the aircraft received its EASA CS-23 certification in March 2020 and its FAA certification in July 2025.

The initial aircraft production is at Périgny, next to La Rochelle. It is intended to move production to a new factory at La Rochelle airport

Design

Unlike traditional aluminium aircraft (riveted metal sheets) or earlier composite aircraft (bonded halves), the Elixir uses a technology called "Carbon Oneshot". This process allows major structures such as the wing and the fuselage to be moulded as single continuous pieces. This design philosophy reduces the airframe part count from thousands (in traditional metal aircraft) to fewer than 1000, aiming to lower maintenance costs and structural failure points.

The aircraft features a T-tail configuration and an unintentional spin-resistant low-wing monoplane design. It is powered by a Rotax 912 iS engine with a three-bladed MT-Propeller tractor propeller, offering fuel efficiency suitable for flight schools. The cockpit is designed with a focus on ergonomics, featuring a full glass cockpit (Garmin G3X) as standard.

Safety features include an explosion-resistant fuel tank and a Ballistic Recovery Systems (BRS) parachute.

Variants

Training

The Elixir was designed specifically to address the needs of modern flight training organizations, aiming to replace aging fleets of legacy aircraft. It is increasingly adopted by flight schools and aero clubs due to its significantly lower operating costs, driven by the fuel-efficient Rotax engine and the reduced maintenance requirements of its "OneShot" carbon airframe structure. The inclusion of a full glass cockpit is considered advantageous for training student pilots, as it familiarizes them with the avionics environments found in modern commercial airliners.

Operators

Major training organizations have selected the aircraft for their training programs:

Specifications - Elixir 912 iS

General Characteristics
Category 100 hp
Crew 1
Passengers 2
Length 6.06 m (19 ft 11 in)
Wingspan 8.48 m (27 ft 82 in)
Height 1.90 m (2 ft 23 in)
Performance characteristics
Category 100 hp
Powerplant Rotax 912iS
Propeller 3-bladed MT-Propeller
Fuel Capacity 94L (24.8 US gal)
Maximum Range (75% power) 793NM
Speed at 75% Cruise 122kt
Fuel Consumption at 75% Cruise 12.5L/h (3.3 US gal)
Maximum Range (85% power) 610NM
Speed at 85% Cruise 125kt
Fuel Consumption at 85% Cruise 15L/h (3.9 US gal)
Maximum Range (50% power) 809NM
Speed at 50% Cruise 110kt
Fuel Consumption at 50% Cruise 11L/h (2.9 US gal)
Climb Rate 950–1300 ft/min
Load Factor +4 / -2 G
Service Ceiling 10,000 ft

Accidents and Incidents

The Elixir has had 5 hull losses; all during the landing phase of flight.