Hackerspace

A German hackerspace (RaumZeitLabor)

A hackerspace (also called a hacklab, hackspace, or makerspace) is a community-operated, often not-for-profit workspace where people with common interests, such as computers, machining, technology, science, digital art, or electronic art, can meet, socialize, and collaborate. Hackerspaces are comparable to other community-operated spaces with similar aims and structures, such as Fab Labs, men's sheds, and some commercial makerspaces.

History

The history of hackerspaces is usually traced to several overlapping traditions, including hacker culture, computer clubs, hacklabs, autonomous social centers, squats, artist-run spaces, and other countercultural or community-operated workshops. In Europe, groups associated with the Chaos Computer Club, c-base in Berlin, and later Metalab in Vienna helped shape a model of semi-public, community-run spaces for technical, artistic, and political experimentation.

Metalab, founded in Vienna in 2006, became one influential example of this newer generation of hackerspaces. Paul Böhm was among the people involved in Metalab's founding and later helped establish Hackerspaces.org, a wiki-based website that listed hackerspaces and collected practical information about starting and running them. As of September 2015, the community list included 1,967 hackerspaces, with 1,199 active sites and 354 planned sites. In 2007, the "Hackers on a Plane" tour brought a group of North American hackers to European hacker events and spaces, including sites in Germany and Austria; participants later helped found spaces such as NYC Resistor, HacDC, and Noisebridge.

In 2012, Bilal Ghalib helped organize a two-day pop-up hackerspace event in Baghdad, which Wired described as part of an emerging wave of DIY maker labs in the Middle East.

Worldwide, many hackerspace or makerspace facilities have been founded. Nicole Lou and Katie Peek reported that in 2016 the number of active or planned spaces was 1,393, fourteen times as many as in 2006.

The US federal government has started adopting the concept of fully open makerspaces within its agencies as of 2015, the first of which (SpaceShop Rapid Prototyping Lab) is at the Ames Research Center.

Activities

Many hackerspaces support the free software movement.

In general, hackerspaces function as centers for peer learning and knowledge sharing, in the form of workshops, presentations, and lectures. They usually also offer social activities for their members, such as game nights and parties. Hackerspaces can be viewed as open community labs incorporating elements of machine shops, workshops, and/or studios where hackers can come together to share resources and knowledge to build and make things.

Many hackerspaces participate in the use and development of free software, open hardware, and alternative media. They are often in infoshops, social centers, adult education centers, public schools, public libraries, or on university campuses, but may relocate to industrial or warehouse space when they need more room.[citation needed]

Naomi Wu demonstrating how to configure a Raspberry Pi 2

Most recent studies of hackerspaces in China, where Internet access is heavily censored, suggest that new businesses and organized technology conferences can intervene in the status quo "from within". The first hackerspace in China, Xinchejian, opened in Shanghai in 2010. A network of hackerspaces subsequently emerged, supporting an emerging maker culture. By designing open technologies and developing new businesses, Chinese makers use, alter, and sometimes provoke existing systems. DIY makers often bring together seemingly contradictory ideas, such as copycat and open source, manufacturing and DIY, and individual empowerment and collective change. In doing so, they craft a subject position beyond the common claim that Chinese citizens lack creativity.

Facilities

An artist gives a tour of one of the two machine shops in Xanadu, a makerspace under the aegis of Burning Man (Idaho Burners Alliance) in Boise which is open to all.
Example makerspace layout

The tools and resources available at hackerspaces vary. They typically provide space for members to work on their projects or collaborate on group projects with other members. Hackerspaces may also operate computer tool lending libraries,[failed verification] or physical tool lending libraries, up to and including creative sex toys in some instances.

The building or facility the hackerspace occupies provides the physical infrastructure that members need to complete their projects. In addition, most hackerspaces provide electrical power, computer servers, and networking with Internet connectivity. Well-equipped hackerspaces may provide machine tools, sewing, crafting, art fabrication, audio equipment, video projectors, game consoles, electronic instrumentation (such as oscilloscopes and signal generators), electronic components and raw materials for hacking, and various other tools for electronics fabrication and creating things. Specialized large-format printers, 3D printers, laser cutters, industrial sewing machines, CNC machine, or water jet cutters may be available for members to use. Some hackerspaces provide food storage and food preparation equipment, and may teach courses in basic or advanced cooking.

Organization

Billboard promoting makerspaces

The character of a hackerspace is determined by its members. There are multiple ways in which hackerspaces are organized.

Membership fees are usually the main income of a hackerspace, but some also accept external sponsors. In the United States, some hackerspaces are organized as tax-exempt nonprofit organizations, including organizations with 501(c)(3) status, while others have chosen to forgo tax-exempt status. University-affiliated hackerspaces often do not charge a fee, but are generally limited to students, staff, or alumni, although visiting guests from other hackerspaces are usually welcome. Some hackerspaces accept volunteer labor in lieu of membership fees, especially from financially limited participants. In addition, some hackerspaces earn income from sponsoring and staffing high-tech flea markets, where members of the general public may buy and sell equipment and supplies.

There is a loose, informal tradition at many hackerspaces of welcoming visitors from other similar organizations, whether across town or internationally. Free exchange of ideas, skills, and knowledge are encouraged, especially at periodic gatherings sometimes called "build nights" or "open door" or "open house" days. The tradition of welcoming visitors to exchange ideas can sometimes be organized into open technologies transfers to address local communities' needs, as happened during a week-long opens-source wind-turbine workshop organized with Nea Guinea at Kopli 93 in Estonia in 2022.

Makerspaces are increasingly being included as learning spaces in schools, learning commons, and other educational facilities.

Ethics

Hackerspaces are widely defined on hackerspaces.org as "community-operated physical places, where people can meet and work on their projects". Their organization varies from place to place and is determined by their members. Although there is no single blueprint or set of guidelines for creating a hackerspace, many spaces draw on a "hacker ethic", which has been described as including autonomy, free access to and circulation of information, distrust of traditional top-down authority, learning by doing, peer-to-peer learning, sharing, solidarity, and cooperation.

Hackerspaces have also been described as physical manifestations of the peer production principles.

Equity and justice-centered making

The evolving maker movement has generated interest for its potential role in opening up access to learning and attainment in STEM, with advocates arguing for its "democratizing effects"—with access to a makerspace, "anyone can make... anyone can change the world”. Makerspaces offer young people opportunities to engage in STEM knowledge and practices in creative and playful ways, where "learning is and for the making".

An explicit equity-agenda has been fairly absent in the maker movement, especially as it relates to sustained engagement in making. The movement remains largely an adult, white, middle-class pursuit, led by those with the necessary leisure time, technical knowledge, experience, and resources. Even with the growth of community-based makerspaces, users of these spaces tend to be adult white men. The median salary for those involved in the maker movement in the US is $103,000, with 97% of those who go to Maker Faires having college degrees (and 70% with graduate degrees). Only 11% of the contributors to Make Magazine (the periodical credited with launching the Maker Movement) are female. Thus, as the maker movement has become formalized, the powerful knowledge and practices of communities of color or of low-income communities have not yet become central to it.

Emerging research has begun to address how the maker movement might address equity concerns broadly. Recent research in this area challenges the field to consider new directions in the design of maker spaces, in maker space programming and pedagogies, and in how to make sense of the outcomes of making. These include (1) Expanding what counts as making; (2) Designing makerspaces that foster an open, flexible and welcoming atmosphere to youth; (3) Maker space programs and pedagogies that support an equitable culture of making, the incorporation of participants' cultural knowledge and practices, a focus on new literacies; and valuing multiple iterations and failing forward; and (4) Expanding the outcomes of making to include agency, identity, and the afterlife of maker projects. Cutting across these areas are specific attention to gender and computer science, indigenous epistemologies and maker activities, and how makerspaces may ground STEM-rich making in the lived experiences and wisdom of youth of color and their families and communities.

One emerging area of studies examines the production of an equitable culture in making, including in-depth longitudinal cases of youth makers in community settings, how youth and community co-design for equitable learning opportunities and outcomes.

Difficulties and critique

Hackerspaces can run into difficulties with building codes or other planning regulations, which may not be designed to handle their scope of activities. For example, a new hackerspace in Nashua, New Hampshire, was shut down by the city after an inspection in 2011. The main issues involved ventilation of heat and toxic fumes; the space was reopened after improvements were made to the building.

The difficulties with opening hackerspaces and makerspaces within nonprofit organizations such as schools and public libraries include cost, space, liability, and availability of personnel. Many makerspaces struggle to sustain viable business models in support of their missions.

In 2009, Johannes Grenzfurthner published the much debated pamphlet "Hacking the Spaces", which deals with exclusionist tendencies in the hackerspace movement. Grenzfurthner extended his critique in lectures at the 2012 and 2014 Hackers on Planet Earth conferences in New York City.

Benefits

Research on makerspaces and hackerspaces has identified several potential educational and social benefits. These include the development of psychosocial skills such as motivation, self-directed learning, initiative, confidence, and positive risk-taking. Hackerspace experiences may also help participants connect classroom learning to practical applications, gain access to resources and materials that would otherwise be unavailable, and develop persistence through iterative work and failure-based learning.

Some studies argue that makerspaces can broaden access to STEM opportunities for underrepresented or economically disadvantaged students. Hands-on activities in such spaces have also been associated with experiential STEM learning in school libraries and other educational settings. Because many hackerspace activities involve group projects, they may also support collaboration and leadership skills.

The social role of makerspaces has also been discussed in relation to emergency response. The 2024 Austrian documentary film Hacking at Leaves examines a makerspace in Durango, Colorado, that produced protective medical equipment during the COVID-19 pandemic. The film includes an excursus on the development of hackerspaces; Make/Heise described it as a documentary about the maker movement in an American small town.

Notable hackerspaces

A directory of hackerspaces is maintained at the Hackerspaces.org wiki.

Many hackerspaces have grown significantly in membership, operational budgets, and local media attention. Many have also helped establish other hackerspaces in nearby locations.

Variations

Many places share values similar to those associated with hackspaces, whether or not they use that terminology. A few examples follow:

Public library hackerspaces

Public libraries have long been places to share learning resources. Some have reconsidered their roles to include resources for hacking and making. These spaces generally call themselves library makerspaces. For example, Chattanooga's 4th floor in Tennessee may have been the first use of a library as laboratory and playground for its community. The User Experience (UX)[where?] is another public laboratory and educational facility. According to Forbes magazine, the first public library to open a MakerSpace was the Fayetteville[which?] Free Library.

Feminist hackerspaces

In response to the alleged misogyny of the tech bro culture that sees hackerspaces as "male" spaces, Seattle Attic was founded in 2013 as the first feminist hackerspace in the U.S. They were soon followed by Double Union, in San Francisco. Their founding came as a result of The Ada Initiative and their AdaCamp conferences, which has also led to the formation of FouFem in Montreal, the Mz Baltazar's Laboratory, a start-up organization and feminist hackspace in Vienna, the Anarchafeminist Hackerhive in San Francisco, the Hacktory in Philadelphia and the Miss Despionas in Tasmania, Australia, and others.[citation needed]

Public school maker/hackerspaces

Some US public schools have hackerspaces. The first high school to open a true makerspace was in Sebastopol, California,[when?][citation needed] and middle schools followed suit. White Hill Middle school in Fairfax, California, opened a makerspace with a class called "Makers and Hackers".[better source needed] In 2018 Penketh High School became the first school with a makerspace in the United Kingdom.

In Shenzhen, China, the nonprofit SteamHead organized a school makerspace inside Shenzhen American International School in 2014, and SZ DIY makerspace organized a makerspace inside Harbour School[which?].

Fab labs

Fab labs are spaces (part of a network initiated by MIT's Center for Bits and Atoms) whose goal is to enable people to "make (almost) anything". They focus heavily on digital fabrication tools.

Community spaces

Many community art spaces share values with hackerspaces. Some, like AS220 and Haystack Mountain School of Crafts have embraced fab lab structures to expand the range of media represented in their spaces to include digital fabrication tools. There are also community-based makerspaces focused on open-access to allow community members to address community-based problems—for example, to share resources and access to critical manufacturing equipment. Makerspaces could also be seen as spaces for the co-production of tools that "foster conviviality to the extent to which they can be easily used, by anybody, as often or as seldom as desired, for the accomplishment of a purpose chosen by the user".

From a justice perspective, open access is important because many makerspaces require payment to use. Examples of community-based making spaces include GET City and Mt Elliot, both in Michigan.[better source needed]

University maker/hackerspaces

Laser cutter in a university library

Some universities and institutions of higher education have opened makerspaces and used them in curricula.

Tool library

Tool libraries generally lack a shared space for making or hacking things, but instead serve as a repository of tools people can borrow for use in their own respective spaces.

Repair cafe / clinic

"Repair cafés" are semipermanent places where people can come together to teach and learn how to fix things. "Repair clinics" are pop-up events without permanent facilities, though they are often sponsored by organizations such as public libraries, schools, or universities. The emphasis is on basic DIY repairs rather than building new things, but there is a similar informal atmosphere of exploration and learning new skills.[citation needed]

Bicycle coops

Bicycle cooperatives are places where people can build or fix bicycles.

Cooking makerspace

Cooking makerspaces are places where anyone can use different professional kitchen equipment and try culinary experiments.

Biomakerspace

Biomakerspaces, as opposed to the typical makerspace, are communal laboratory spaces specifically for biology. Typically, their facilities include biological equipment such as PCR machines, autoclaves, and centrifuges. Many biomakerspaces also offer courses on biological techniques.

See also