Honda CL125

Honda CL125
1973 Honda CL125S
ManufacturerHonda
Also calledHonda Scrambler
Production1967-1974
Assembly 
Predecessor 
Successor 
ClassScrambler
Engine122 cc (7.4 cu in), SOHC, air-cooled, single-cylinder. (1973-1974)
124 cc (7.6 cu in) SOHC, air-cooled, Parallel Twin. (1967-1969)
Top speed55 MPH
Power14HP @ 10,000RPM
Torque1.06 kg-m (7.67 ft. lbs) 8,500 rpm
Ignition typeKick start
Transmission5-speed manual, chain final drive
SuspensionFront: telescopic forks
Rear: swingarm with two spring/shock units.
BrakesFront: drum
Rear: drum
TiresFront: 2.75-18-4
Rear: 3.00-18-4
Rake, trail86 mm (3.38 inches)
Wheelbase1,270 mm (50.0 inches)
DimensionsL: 1,930 mm (76.0 inches)
W: 830 mm (32.7 inches)
H: 1,040 mm (41 inches)
Seat height737 mm (29.0 inches)
Weight117.0 kg (258 pounds) (dry)
  (wet)
Fuel capacity10.5 litres (2.8 gallons)
Fuel consumption65 MPG

The Honda CL125 was a scrambler motorcycle made by Honda from 1967 to 1974. Two different engines were used through the models life: 1967-1969: CL125A 124cc 2 cylinder 4-stroke, 1973-1974: CL125S 122cc 1 cylinder 4-stroke.

The CL125A was produced from 1967 to 1969 with a 124 cc 4-stroke engine and four-speed transmission. It was the smallest OHC twin cylinder four-stroke that Honda made, and was the smaller sibling to the 160, 175, 350 & 450 models.

In 1970, Honda introduced a 99 cc OHC single-cylinder four-stroke engine that was subsequently used in several CB, CL, and SL models. In 1973, Honda introduced the CL125S with a 122 cc version of this engine.

The CL125S was closely related to the CL100 produced from 1970 to 1973. The CL125S differed in that it had lower final-drive gearing, different tires, a shorter front fender, a braced handlebar, a high-mounted exhaust, and it lacked a tachometer. The CL125S had a reported dry weight of 196 lb (89 kg).

1974 Honda CL125S Scrambler Red.
1974 Honda CL125S.