ISO 22324

ISO 22324:2022, Security and resilience — Emergency management — Guidelines for colour-coded alerts, is an international standard developed by ISO/TC 292 Security and resilience. This document provide guidelines for color codes to indicate severity of hazards in public warnings.

There are many different systems are already in use, such as colour state of meteorological condition or former Homeland Security Advisory System, and the standard is intended to be an approach to eliminate confusion due to such differences.

Scope and contents

ISO 22324 includes the following main clauses:

1 Scope
2 Normative references
3 Terms and definitions
4 Guidance for use of colour codes
     4.1 General
     4.2 Colour codes to express the status of hazard
     4.3 Colour codes to give supplementary information
     4.4 Consideration for human factors and colour blindness
Annex A Examples on the use of colour codes in practice
Annex B Recommendations for colour selection

Color codes for severity level

Three basic color codes for severity levels are defined with meaning and proposed action, as in following table.

Basic color codes
ColorText colorMeaningProposed action
RedWhiteDangerTake appropriate safety action immediately
YellowBlackCautionPrepare to take appropriate safety action
GreenWhiteSafeNo action required

If more than three levels of hazards are needed, the standard recommends use of colors on the spectrum between the red and green. The number of levels should be minimized to avoid confusion, not to exceed seven colors.

Diversity of human limitation of ability to recognize color, including color blindness, should be paid attention when a color code system is brought into operation. The standard recommends to pay special care to provide supporting information, such as:

  • text (recommended color is shown in the table), numbers, shape, symbol or size
  • audible color name, such as audible "red alert" voice
  • positional cues i.e. colors should always be placed in a certain defined order in increasing levels of severity, such as left to right or bottom to top

Color codes for supplementary information

The standard gives additional color codes for supplementary information, defined with meaning and usage limitation, as in following table.

ColorText colorMeaningUsage
BlackWhiteFatal dangerCan be used with red; can be replaced by black-and-white checkerboard pattern
PurpleWhiteFatal dangerCan be used with red
BlueWhiteInformational purposesShould not be used to indicate level of severity
GreyNo information availableTo indicate no information is available

Black and purple can be used to indicate special cases of danger, i.e. red color code, thus supporting information such as text (recommended color shown in table above) is also recommended.

An example is the sequence black–red–yellow–green, used in triage tag in most part of the world.

The Annex B (informational) of the standard gives recommended selection of color for above-defined color codes. Each color code has saturated and unsaturated cases, both defined in Munsell, CMYK, and RGB systems.

ISO 22324 is part of a series of ISO standards and Technical Reports on Emergency management, including

History

This standard was published for the first time in 2015.

Year Description
2015ISO 22324 (1st edition)
2022ISO 22324 (2nd edition)