Langbeinites

Langbeinites are a family of crystalline substances based on the structure of langbeinite with general formula M2M'2(SO4)3, where M is a large univalent cation (such as potassium, rubidium, caesium, or ammonium), and M' is a small divalent cation (for example, magnesium, calcium, manganese, iron, cobalt, nickel, copper, zinc or cadmium). The sulfate group, SO2−4, can be substituted by other tetrahedral anions with a double negative charge such as tetrafluoroberyllate (BeF2−4), selenate (SeO2−4), chromate (CrO2−4), molybdate (MoO2−4), or tungstates. Although monofluorophosphates are predicted, they have not been described. By redistributing charges other anions with the same shape such as phosphate also form langbeinite structures. In these the M' atom must have a greater charge to balance the extra three negative charges.

At higher temperatures the crystal structure is cubic P213. However, the crystal structure may change to lower symmetries at lower temperatures, for example, P21, P1, or P212121. Usually this temperature is well below room temperature, but in a few cases the substance must be heated to acquire the cubic structure.

Crystal structure

The crystal structures of langbeinites consist of a network of oxygen vertex-connected tetrahedral polyanions (such as sulfate) and distorted metal ion-oxygen octahedra. The unit cell contains four formula units. In the cubic form the tetrahedral anions are slightly rotated from the main crystal axes. When cooled, this rotation disappears and the tetrahedra align, resulting in lower energy as well as lower crystal symmetry.

Examples

Sulfates include dithallium dicadmium sulfate, dirubidium dicadmium sulfate, dipotassium dicadmium sulfate, dithallium manganese sulfate, and dirubidium dicalcium trisulfate. Dipotassium dinickel sulfate can also be synthesized.

Selenates include diammonium dimanganese selenate. A diammonium dicadmium selenate langbeinite could not be crystallised from water, but a trihydrate exists.

Chromate based langbeinites include dicaesium dimanganese chromate.

Molybdates include Rb2Co2(MoO4)3. Potassium members are absent, as are zinc and copper containing solids, which all crystallize in different forms. Manganese, magnesium, cadmium and some nickel double molybdates exist as langbeinites.

Double tungstates of the form A2B2(WO4)3 are predicted to exist in the langbeinite form.

An examples with tetrafluroberyllate is dipotassium dimanganese tetrafluoroberyllate (K2Mn2(BeF4)3). Other tetrafluoroberyllates may include: Rb2Mg2(BeF4)3; Tl2Mg2(BeF4)3; Rb2Mn2(BeF4)3; Tl2Mn2(BeF4)3; Rb2Ni2(BeF4)3; Tl2Ni2(BeF4)3; Rb2Zn2(BeF4)3; Tl2Zn2(BeF4)3; Cs2Ca2(BeF4)3; Rb2Ca2(BeF4)3; RbCsMnCd(BeF4)3; Cs2MnCd(BeF4)3; RbCsCd2(BeF4)3; Cs2Cd2(BeF4)3; Tl2Cd2(BeF4)3; (NH4)2Cd2(BeF4)3; KRbMnCd(BeF4)3; K2MnCd(BeF4)3; Rb2MnCd(BeF4)3; Rb2Cd2(BeF4)3; RbCsCo2(BeF4)3; (NH4)2Co2(BeF4)3; K2Co2(BeF4)3; Rb2Co2(BeF4)3; Tl2Co2(BeF4)3; RbCsMn2(BeF4)3; Cs2Mn2(BeF4)3; RbCsZn2(BeF4)3; (NH4)2Mg2(BeF4)3; (NH4)2Mn2(BeF4)3; (NH4)2Ni2(BeF4)3; (NH4)2Zn2(BeF4)3;KRbMg2(BeF4)3; K2Mg2(BeF4)3; KRbMn2(BeF4)3; K2Ni2(BeF4)3; K2Zn2(BeF4)3.

The phosphate containing langbeinites were found in 1972 with the discovery of KTi2(PO4)3, and since then a few more phosphates that also contain titanium have been found such as Na2FeTi(PO4)3 and Na2CrTi(PO4)3. By substituting metals in A2MTi(PO4)3, A from (K, Rb, Cs), and M from (Cr, Fe, V), other langbeinites are made. The NASICON-type structure competes for these kinds of phosphates, so not all possibilities are langbeinites. Other phosphate based substances include K2YTi(PO4)3, K2ErTi(PO4)3, K2YbTi(PO4)3, K2CrTi(PO4)3, K2AlSn(PO4)3, KRbYbTi(PO4)3. Sodium barium diiron tris-(phosphate) (NaBaFe2(PO4)3) is yet another variation with the same structure but differently charged ions. Most phosphates of this kind of formula do not form langbeinites, instead crystallise in the NASICON structure with archetype Na3Zr2(PO4)(SiO4)2.

A langbeinite with arsenate is known to exist by way of K2ScSn(AsO4)3.

Properties

Physical properties

Langbeinite-family crystals can show ferroelectric or ferroelastic properties. Diammonium dicadmium sulfate identified by Jona and Pepinsky with a unit cell size of 10.35 Å becomes ferroelectric when the temperature drops below 95 K. The phase transition temperature is not fixed, and can vary depending on the crystal or history of temperature change. So for example the phase transition in diammonium dicadmium sulfate can occur between 89 and 95 K. Under pressure the highest phase transition temperature increases. ∂T/∂P = 0.0035 degrees/bar. At 824 bars there is a triple point with yet another transition diverging at a slope of ∂T/∂P = 0.103 degrees/bar. For dipotassium dimanganese sulfate pressure causes the transition to rise at the rate of 6.86 °C/kbar. The latent heat of the transition is 456 cal/mol.

Dithallium dicadmium sulfate was shown to be ferroelectric in 1972.

Dipotassium dicadmium sulfate is thermoluminescent with stronger outputs of light at 350 and 475 K. This light output can be boosted forty times with a trace amount of samarium. Dipotassium dimagnesium sulfate doped with dysprosium develops thermoluminescence and mechanoluminescence after being irradiated with gamma rays. Since gamma rays occur naturally, this radiation induced thermoluminescence can be used to date evaporites in which langbeinite can be a constituent.

At higher temperatures the crystals take on cubic form, whereas at the lowest temperatures they can transform to an orthorhombic crystal group. For some types there are two more phases, and as the crystal is cooled it goes from cubic, to monoclinic, to triclinic to orthorhombic. This change to higher symmetry on cooling is very unusual in solids. For some langbeinites only the cubic form is known, but that may be because it has not been studied at low enough temperatures yet. Those that have three phase transitions go through these crystallographic point groups: P213 – P21 – P1 – P212121, whereas the single phase change crystals only have P213 – P212121.

K2Cd2(SO4)3 has a transition temperature above room temperature, so that it is ferroelectric in standard conditions. The orthorhombic cell size is a=10.2082 Å, b=10.2837 Å, c=10.1661 Å.

Where the crystals change phase there is a discontinuity in the heat capacity. The transitions may show thermal hysteresis.

Different cations can be substituted so that for example K2Cd2(SO4)3 and Tl2Cd2(SO4)3 can form solid solutions for all ratios of thallium and potassium. Properties such as the phase transition temperature and unit cell sizes vary smoothly with the composition.

Langbeinites containing transition metals can be coloured. For example, cobalt langbeinite shows a broad absorption around 555 nm due to the cobalt 4T1g(F)→4T1g(P) electronic transition.

The enthalpy of formation (ΔfHm) for solid (NH4)2Cd2(SO4)3 at 298.2 K is −3031.74±0.08 kJ/mol, and for K2Cd2(SO4)3 it is −3305.52±0.17 kJ/mol.

Sulfates

Properties of langbeinites with sulfate anions
Formula Weight (g/mol) Comment / Symmetries Transition temperature (K) Density Cell size (Å) Refractive index
1 2 3
Na2Mg2(SO4)3 382.78 3 phases, 1–2, >3 250 350 575
K2Mg2(SO4)3 414.99 4 phases langbeinite 51 54.9 63.8 2.832 9.9211 1.536
Rb2Mg2(SO4)3 507.73 made 3.367 10.0051 1.556
Cs2Mg2(SO4)3 602.61 no compound
(NH4)2Mg2(SO4)3 372.87 Efremovite 241 220 2.49 9.979
Tl2Mg2(SO4)3 745.56 ≥3 phase 227.8 330.8
K2CaMg(SO4)3 430.77 made 2.723 10.1662 1.525
K2Ca2(SO4)3 446.54 4 phases calciolangbeinite 457 2.69 2.683 10.429Å a=10.334 b=10.501 c=10.186 Nα=1.522 Nβ=1.526 Nγ=1.527
Rb2Ca2(SO4)3 539.28 2 phases 183 3.034 10.5687 1.520
Cs2Ca2(SO4)3 634.15 3.417 10.7213 1.549
Tl2Ca2(SO4)3 no compound
(NH4)2Ca2(SO4)3 404.42 made 158 2.297 10.5360 1.532
(NH4)2V2(SO4)3 colour clear green 2.76 10.089
K2Mn2(SO4)3 476.26 manganolangbeinite
2 phases
pale pink
191 3.02 10.014
(orthorhombic)
a=10.081, b=10.108, c=10.048 Å
1.576
Rb2Mn2(SO4)3 569 made 3.546 10.2147 1.590
Cs2Mn2(SO4)3 663.87 predicted
(NH4)2Mn2(SO4)2 434.14 made 2.72 10.1908
Tl2Mn2(SO4)3 806.83 made 5.015 10.2236 1.722
K2Fe2(SO4)3 478.07 made ?130
Rb2Fe2(SO4)3 predicted
Tl2Fe2(SO4)3 808.64 exists
(NH4)2Fe2(SO4)3 435.95 mineral ferroefremovite 2.84 10.068 1.574
K2Co2(SO4)3 484.25 2 phases
deep purple
126 3.280 9.9313 1.608
Rb2Co2(SO4)3 576.99 made 3.807 10.0204 1.602
Cs2Co2(SO4)3 671.87
(NH4)2Co2(SO4)3 442.13 made 2.94 9.997
Tl2Co2(SO4)3 813.82 made 5.361 10.0312 1.775
K2Ni2(SO4)3 483.77 made light greenish yellow 0.74 1.14 3.369 9.8436 1.620
Rb2Ni2(SO4)3 576.51 made 3.921 9.9217 1.636
Cs2Ni2(SO4)3 671.39 predicted
(NH4)2Ni2(SO4)3 441.65 made 160 3.02 9.904
Tl2Ni2(SO4)3 814.34 predicted
Rb2Cu2(S04)3 predicted
Cs2Cu2(S04)3 predict not
Tl2Cu2(S04)3 predicted
K2Zn2(SO4)3 497.1 4 phases 75 138 3.376 9.9247 1.592
Rb2Zn2(S04)3 predicted
Cs2Zn2(S04)3 predict not
Tl2Zn2(S04)3 predicted
K2Cd2(SO4)3 591.21 2 phases 432 2.615 3.677 a=10.212 b=10.280 c=10.171 Nα=1.588 Nγ=1.592
Rb2Cd2(SO4)3 683.95 4 phases 66 103 129 4.060 10.3810 1.590
(NH4)2Cd2(SO4)3 549.09 4 phases 95 3.288 10.3511
Tl2Cd2(SO4)3 921.78 4 phases 92 120 132 5.467 10.3841 1.730

Fluoroberyllates

Properties of langbeinites with fluoroberyllate (BeF2−4) anion
Formula Weight (g/mol) Cell size (Å) Volume Density Comment
K2Mn2(BeF4)3 4 phases transition at 213
K2Mg2(BeF4)3 9.875 962.8 1.59
(NH4)2Mg2(BeF4)3 9.968 1.37
KRbMg2(BeF4)3 9.933 1.72
Rb2Mg2(BeF4)3 9.971 1.91
Tl2Mg2(BeF4)3 9.997 2.85
K2Ni2(BeF4)3 9.888 1.86
Rb2Ni2(BeF4)3 9.974 2.19
Tl2Ni2(BeF4)3 9.993 3.13
K2Co2(BeF4)3 9.963 988 1.82
(NH4)2Co2(BeF4)3 10.052 1.61
Rb2Co2(BeF4)3 10.061 2.14
Tl2Co2(BeF4)3 10.078 3.05
RbCsCo2(BeF4)3 10.115 2.28
K2Zn2(BeF4)3 9.932 1.89
(NH4)Zn2(BeF4)3 10.036 1.67
Rb2Zn2(BeF4)3 10.035 2.20
Tl2Zn2(BeF4)3 10.060 3.14
RbCsZn2(BeF4)3 10.102 2.36
K2Mn2(BeF4)3 10.102 1.72
KRbMn2(BeF4)3 10.187 1.82
(NH4)2Mn2(BeF4)3 10.217 1.50
Rb2Mn2(BeF4)3 10.243 2.00
Tl2Mn2(BeF4)3 10.255 2.87
RbCsMn2(BeF4)3 10.327 2.12
Cs2Mn2(BeF4)3 10.376 2.26
K2MnCd(BeF4)3 10.133 1.92
KRbMnCd(BeF4)3 10.220 2.04
Rb2MnCd(BeF4)3 10.133 1.92
RbCsMnCd(BeF4)3 10.380 2.28
Cs2MnCd(BeF4)3 10.451 2.41
(NH4)2Cd2(BeF4)3 10.342 1.87
Rb2Cd2(BeF4)3 10.385 2.32
Tl2Cd2(BeF4)3 10.402 3.16
RbCsCd2(BeF4)3 10.474 2.43
Cs2Cd2(BeF4)3 10.558 2.53
RbCsCdCa(BeF4)3 10.501 2.15
Rb2Ca2(BeF4)3 10.480 1.74
RbCsCa2(BeF4)3 10.583 1.86
Cs2Ca2(BeF4)3 10.672 1.98
Cs2Mg2(BeF4)3 does not exist

Phosphates

Properties of langbeinites with phosphate (PO2−4) anion
Formula Weight (g/mol) Cell size (Å) Density Comment ref
LiCs2Y2(PO4)3 735.48 10.5945 4.108
LiRb2Y2(PO4)3 non-linear optical
K2YTi(PO4)3 578.25 10.1053 3.192
K2ErTi(PO4)3 584.03 10.094 3.722
K2YbTi(PO4)3 499.89 10.1318 3.772
K2CrTi(PO4)3 462.98 9.8001 3.267
(NH4)(H3O)TiIIITiIV(PO4)3 417.71 9.9384
K2Ti2(PO4)3 458.84 9.8688 Also K2−x; dark blue, purplish
Rb2Ti2(PO4)3 551.58 9.9115
Tl2Ti2(PO4)3 789.41 9.9386
Na2FeTi(PO4)3 9.837
Na2CrTi(PO4)3 9.775
K2Mn0.5Ti1.5(PO4)3 9.903 3.162 dark brown
K2Co0.5Ti1.5(PO4)3 9.844 3.233 dark brown
Rb4NiTi3(PO4)6 1113.99÷2 9.9386
K2AlTi(PO4)3 437.96 9.7641 3.125 colourless
K2TiYb(PO4)3
Li2Zr2(PO4)3 481.24
NaZr2(PO4)3 980,71 10.2088 3.06125 negative thermal expansion 25-500 °C
K2(Ce, ..., Lu)Zr(PO4)3 594.45...629.3 10.29668
Rb2FeZr(PO4)3 602.92 10.1199
K2FeZr(PO4)3 510.18 10.0554 dark grey Note Na2FeZr(PO4)3 is not a langbeinite.
K2YZr(PO4)3 543.24 10.3346 random Y and Zr
K2GdZr(PO4)3 611.58 10.3457 random Gd and Zr
K2GdHf(PO4)3 698.85 10.3179 4.226
K2YHf(PO4)3 630.51 10.3075 3.824
Li(H2O)2Hf2(PO4)3 684.87 10.1993
K2BiHf(PO4)3 750.58
Li(H2O)2Zr2(PO4)3 510.33 10.2417
K2AlSn(PO4)3 508.78 9.798
K2CrSn(PO4)3 9.8741 [citation needed]
K2InSn(PO4)3 10.0460 [citation needed]
K2FeSn(PO4)3 9.921 [citation needed]
K2YbSn(PO4)3 10.150 [citation needed]
K4Al3Ta(PO4)6 988.11 9.7262
K4Cr3Ta(PO4)6 1063.16 9.8315
K4Fe3Ta(PO4)6 1074.70 9.9092
K4Tb3Ta(PO4)6 10.3262
K4Ga3Ta(PO4)6
K4Gd3Ta(PO4)6
K4Dy3Ta(PO4)6
K4Ho3Ta(PO4)6
K4Er3Ta(PO4)6
K4Yb3Ta(PO4)6
Rb4Ga3Ta(PO4)6
Rb4Gd3Ta(PO4)6
Rb4Dy3Ta(PO4)6
Rb4Ho3Ta(PO4)6
Rb4Er3Ta(PO4)6
Rb4Yb3Ta(PO4)6
K4Fe3Nb(PO4)6 986.66 9.9092
KBaEr2(PO4)3 795.857
RbBaEr2(PO4)3 842.227
CsBaEr2(PO4)3 889.665
(Rb,Cs)2(Pr,Er)Zr(PO4)3
KCsFeZrP3O12 603.99 10.103
CaFe3O(PO4)3 508.53
SrFe3O(PO4)3 556.1
PbFe3O(PO4)3 675.6
KSrFe2(PO4)3 523.32 9.809 3.68 yellowish
Pb1.5VIV2(PO4)3 697.6 9.7818 4.912
K2TiV(PO4)3 9.855 green
BaTiV(PO4)3 9.922 3.54 at high temperature > 950 °C dark grey
KBaV2(PO4)3 9.873 greenish yellow
Ba1.5V2(PO4)3 9.884 grey
Ba1.5Fe3+2(PO4)3 602.59
KSrSc2(PO4)3 501.54
Rb0.743K0.845Co0.293Ti1.707(PO4)3 9.8527
K2BiZr(PO4)6 663.32 10.3036
KBaSc2(PO4)3 503.25
KBaIn2(PO4)3
KBaRZrP2SiO12 R = La, Nd, Sm, Eu, Gd, Dy, Y
KBaYSnP2SiO12 666.07
KBaFe2(PO4)3 525.03 9.8732 (at 4 K)
KBaCr2(PO4)3 517.33 9.7890
Rb2FeTi(PO4)3 511.56 9.8892 Na2FeTi(PO4)3 has NZP structure
K5/3MgTi4/3(PO4)3 9.836
KBaMgTi(PO4)3 485.51 9.914 KSrMgTi crystallises in kosnarite form
KPbMgTi(PO4)3 555.39 9.8540 KSrMgTi in kosnarite form
RbBaMgTi(PO4)3 9.954 CsBa does not form
RbPbMgTi(PO4)3 601.76 9.9090 CsPb does not form
K5/3MgZr4/3(PO4)3 10.176
KSrMgZr(PO4)3 479.16 10.165
KPbMgZr(PO4)3 598.74 10.111
KBaMgZr(PO4)3 528.87 10.106
RbSrMgZr(PO4)3 525.53 10.218
RbPbMgZr(PO4)3 645.11 10.178
RbBaMgZr(PO4)3 575.24 10.178
CsSrMgZr(PO4)3 572.97 10.561 over 1250 °C forms kosnarite phase
Ba3In4(PO4)6 10.1129
Ba3V4(PO4)6 1185.58 9.8825 4.08 yellow-green
KPbCr2(PO4)3 9.7332
KPbFe2(PO4)3 9.8325 beige
K4NiZr3(PO4)6 529.29 (half) 10.1572 light yellow
K4NiHf3(PO4)6 660.192 (half) 10.12201 4.228 yellow
NaBaBi2(PO3)3
K2ScTi(PO4)3 lilac
Pb2CoFe(PO4)3 9.7933
Ba2FeCo(PO4)3 9.9081 orange
RbSrSc2(PO4)3 10.02879
Cs2UIVCe(PO4)3 928.89 10.8588 4.819
Cs2UIVPr(PO4)3 929.67 10.8392 4.849
Cs2UIVNd(PO4)3 933.01 10.8287 4.88
Cs2UIVSm(PO4)3 939.11 10.8069 4.942
Cs2UIVEu(PO4)3 940.73 10.7822 4.985
Cs2UIVGd(PO4)3 946.02 10.7728 5.026
Cs2UIVTb(PO4)3 947.69 10.7591 5.054
Cs2UIVDy(PO4)3 951.26 10.7428 5.096
Cs2UIVHo(PO4)3 953.70 10.7276 5.131
Cs2UIVEr(PO4)3 956.03 10.7127 5.165
Cs2UIVTm(PO4)3 957.69 10.6888 5.209
Cs2UIVYb(PO4)3 961.81 10.6787 5.246
Cs2UIVLu(PO4)3 963.74 10.6619 5.282

Phosphate silicates

substance formula weight unit cell edge Å density comment ref
K2Sn2(PO4)2SiO4 Stable to 650 °C
K2Zr2(PO4)2SiO4 Stable to 1000 °C
Rb2Zr2(PO4)2SiO4
Cs2Zr2(PO4)2SiO4
CsKZr2(PO4)2SiO4
KBaZrY(PO4)2SiO4
KBaZrLa(PO4)2SiO4
KBaZrNd(PO4)2SiO4
KBaZrSm(PO4)2SiO4
KBaZrEu(PO4)2SiO4

Mixed anion phosphates

substance formula weight unit cell edge Å density comment ref
K2MgTi(SO4)(PO4)2
K2Fe2(MoO4)(PO4)2
K2Sc2(MoO4)(PO4)2
K2Sc2(WO4)(PO4)2

Vanadates

The orthovanadates have four formula per cell, with a slightly distorted cell that has orthorhombic symmetry.

formula weight comment Cell dimensions Å Volume density refractive
Formula g/mol symmetries a b c index
LiBaCr2(VO4)3 593.08 Orthorhombic 9.98 10.52 9.51 998 4.02
NaBaCr2(VO4)3 609.13 Orthorhombic 9.99 10.52 9.53 1002 4.09
AgBaCr2(VO4)3 694.00 Orthorhombic 10.02 10.53 9.53 1005 4.62

Arsenates

substance formula weight unit cell edge Å density
K2ScSn(AsO4)3 658.62 10.3927
Zr2NH4(AsO4)3·H2O 632.558 10.532 3.379

Selenates

Langbeinite structured double selenates are difficult to make, perhaps because selenate ions arranged around the dication leave space for water, so hydrates crystallise from double selenate solutions. For example, when ammonia selenate and cadmium selenate solution is crystallized it forms diammonium dicadmium selenate trihydrate: (NH4)2Cd2(SeO4)3·3H2O and when heated it loses both water and ammonia to form a pyroselenate rather than a langbeinite.

substance formula weight unit cell edge Å density note
(NH4)2Mn2(SeO4)3 574.83 10.53 3.26 forms continuous series with SO4 too

Molybdates

substance formula weight unit cell edge Å density ref
Cs2Cd2(MoO4)3 970.5 11.239
Rb2Co2(MoO4)3 768.7
Cs2Co2(MoO4)3
Cs2Fe2(MoO4)3 10.9112
Cs2Ni2(MoO4)3 863.01 10.7538
(H3O)2Mn2(MoO4)3 627.75 10.8713
K2Mn2(MoO4)3
KMn0.25Mg0.25Co0.25Zn0.25InMo3O12
Tl1.85K0.15Mg2(MoO4)3 10.6851
Tl1.85Rb0.15Mg2(MoO4)3 10.69463

Tungstates

substance formula weight unit cell edge Å density
Rb2Mg2(WO4)3 963.06 10.766
Cs2Mg2(WO4)3 1057.93 10.878

Preparation

Diammonium dicadmium sulfate can be made by evaporating a solution of ammonium sulfate and cadmium sulfate. Dithallium dicadmium sulfate can be made by evaporating a water solution at 85 °C. Other substances may be formed during crystallisation from water such as Tutton's salts or competing compounds like Rb2Cd3(SO4)4·5H2O.

Potassium and ammonium nickel langbeinite can be made from nickel sulfate and the other sulfates by evaporating a water solution at 85 °C.

Dipotassium dizinc sulfate can be formed into large crystals by melting zinc sulfate and potassium sulfate together at 753 K. A crystal can be slowly drawn out of the melt from a rotating crucible at about 1.2 mm every hour.

Li(H2O)2Hf2(PO4)3 can be made by heating HfCl4, Li2B4O7, H3PO4, water and hydrochloric acid to 180 °C for eight days under pressure. Li(H2O)2Hf2(PO4)3 converts to Li2Hf2(PO4)3 on heating to 200 °C.

The sol-gel method produces a gel from a solution mixture, which is then heated. Rb2FeZr(PO4)3 can be made by mixing solutions of FeCl3, RbCl, ZrOCl2, and dripping in H3PO4. The gel produced was dried out at 95 °C and then baked at various temperatures from 400 to 1100 °C.

Langbeinites crystals can be made by the Bridgman technique, Czochralski process or flux technique.

A Tutton's salt may be heat treated and dehydrate, e.g. (NH4)2Mn2(SeO4)3 can be made from (NH4)2Mn(SeO4)3·6(H2O) heated to 100 °C, forming (NH4)2(SeO4) as a side product. Similarly the ammonium vanadium Tutton's salt, (NH4)2V(SO4)2, heated to 160 °C in a closed tube produces (NH4)2V2(SO4)3. At lower temperatures a hydroxy compound is formed.

Use

Few uses have been made of these substances. Langbeinite itself can be used as an "organic" fertiliser with potassium, magnesium and sulfur, all needed for plant growth. Electrooptic devices could be made from some of these crystals, particularly those that have cubic transition temperatures as temperatures above room temperature. Research continues into this. Ferroelectric crystals could store information in the location of domain walls.

The phosphate langbeinites are insoluble, stable against heat, and can accommodate a large number of different ions, and have been considered for immobilizing unwanted radioactive waste.

Zirconium phosphate langbeinites containing rare earth metals have been investigated for use in white LEDs and plasma displays. Langbeinites that contain bismuth are photoluminescent. In case of iron-containing ones complex magnetic behavior may be found.

Some members of the sulphate and the phosphate langbeinites are potential quantum spin liquid materials. Research is ongoing.