Pennsylvania Railroad class C1

Pennsylvania Railroad C1
Type and origin
Power typeSteam
BuilderPennsylvania Railroad
Build date1925, 1927
Total produced90
Specifications
Configuration:
​
 • Whyte0-8-0
 • UICDh
Driver3rd coupled axle
Gauge4 ft 8+1⁄2 in (1,435 mm)
Driver dia.56 in (1.422 m)
Tender wheels33 in (0.84 m)
Wheelbase15 ft 9 in (4.80 m) ​
 • Axle spacing
(Asymmetrical)
5 ft 3 in (1.60 m)
Length68 ft 4+1⁄4 in (20.83 m)
Width10 ft 6+1⁄4 in (3.21 m)
Height14 ft 11+7⁄16 in (4.56 m)
Axle load74,000 lb (33.6 t)
Adhesive weight278,000 lb (126.1 t)
Loco weight278,000 lb (126.1 t)
Tender weight156,000 lb (70.8 t)
Fuel typeBituminous coal
Fuel capacity15.5 short tons (14.1 t)
Water cap.7300 US gallons (6100 imp gal; 28,000 L)
Firebox:​
 • Grate area61.6 sq ft (5.72 m2)
Boiler pressure250 psi (1.72 MPa)
CylindersTwo
Cylinder size27 in × 30 in (686 mm × 762 mm)
Valve gearWalschaerts
Valve typePiston
Performance figures
Tractive effort76,154 lbf (338.7 kN)
Career
Numbers6550–6639
Retired1948–1953
DispositionAll scrapped

The PRR C1 was the Pennsylvania Railroad's class of 0-8-0 steam locomotive, used in switching service. The locomotive type was built at the railroad's Juniata shops in Altoona, Pennsylvania and introduced in 1925.

The 0-8-0 was common on most railroads, but not on PRR; when the railroad needed larger motive power, they used the 2-8-0 "Consolidation". The PRR wanted the best motive power for switching duties at rail yards and interchanges, and the C1 class was the heaviest two-cylinder 0-8-0 switcher ever produced. Calculated tractive effort was 76,154 lb, based on 78% MEP with 60% maximum cutoff. All C1s were withdrawn and scrapped between 1948 and 1953.