REX prefix

The REX prefix (from "register extensions") and REX coding scheme was introduced as part of AMD's x86-64 instruction set architecture that extended Intel's IA-32 instruction set architecture for microprocessors from Intel, AMD and others.

It provides additional space for encoding 64-bit addressing modes and additional registers present in the x86-64 architecture.

The one-byte REX prefix can be added to new and existing instructions. It provides 4 bits of payload in total and allows addressing 16 registers.

A two-byte REX2 prefix was proposed by Intel's Advanced Performance Extensions in 2023 that would offer 8 bits of payload and allow addressing 32 registers.

Instruction encoding

Instruction format using the REX prefix
# of bytes 1, 2 1 1 0, 1 0, 1, 2, 4 0, 1
Part [Prefixes] [REX] OPCODE ModR/M [SIB] [DISP] [IMM]

The REX coding scheme uses an opcode prefix consisting of one byte, which may be added to existing or new instruction codes.

It has the four high-order bits set to four, which replaces sixteen opcodes numbered 0x40–0x4F. Previously, those opcodes were individual INC and DEC instructions for the eight standard processor registers; x86-64 code must use ModR/M INC and DEC instructions.

In the x86 architecture, instructions with a memory operand almost always use the ModR/M byte which specifies the addressing mode. This byte has three bit fields:

The base-plus-index and scale-plus-index forms of 32-bit addressing (encoded with r/m = 100 and mod ≠ 11) require another addressing byte, the SIB byte. It has the following fields:

REX encoding
Byte Bit
REX
7 6 5 4 3 2 1 0
0 (0x4_) 0 1 0 0 W R X B
REX2 (2-byte REX)
7 6 5 4 3 2 1 0
0 (0xD5) 1 1 0 1 0 1 0 1
1 M0 R4 X4 B4 W R3 X3 B3

The REX prefix's bit-field W changes the operand size to 64 bits, R expands reg to 4 bits, B expands r/m (or opreg in the few opcodes that encode the register in the 3 lowest opcode bits, such as "POP reg"), and X and B expand index and base in the SIB byte.

The REX2 prefix is a 2-byte variant of the REX prefix, that is proposed with Intel's Advanced Performance Extensions and allows addressing 32 registers.

History

See also