IEEE 802.11be-2024 or 802.11be, dubbed Extremely High Throughput (EHT), is a wireless networking standard in the IEEE 802.11 set of protocols which is designated Wi-Fi 7 by the Wi-Fi Alliance. It is built upon Wi-Fi 6 (IEEE 802.11ax), focusing on WLAN indoor and outdoor operation with stationary and pedestrian speeds in the 2.4, 5, and 6GHz frequency bands.
In a single band, throughput reaches a theoretical maximum of 23Gbit/s, although actual results are much lower.
Development of the 802.11be amendment began with an initial draft in March 2021 and was approved by IEEE-SA under the designation IEEE 802.11be-2024, though the final published document was not released until 22 July 2025. Despite this, numerous products were announced in 2022 based on draft standards, with retail availability in early 2023. On 8 January 2024, the Wi-Fi Alliance introduced its Wi-Fi Certified 7 program to certify Wi-Fi 7 devices, as the technical requirements were essentially complete.
Core features
The following are core features that have been approved as of Draft 3.0:
4096-QAM (4K-QAM) enables each symbol to carry 12 bits rather than 10 bits, resulting in 20% higher theoretical transmission rates than Wi-Fi 6's 1024-QAM, at the same symbol or baud rate. This feature is optional for Wi-Fi 7 certification.
Contiguous and non-contiguous 320/160+160MHz and 240/160+80MHz bandwidth. This feature is optional for Wi-Fi 7 certification.
Multi-link Operation (MLO), a feature that increases capacity by simultaneously sending and receiving data across different frequency bands and channels. (2.4GHz, 5GHz, 6GHz). This feature is mandatory for Wi-Fi 7 certification. Wi-Fi 7 builds on the technology of Wi-Fi 6 through the introduction of Multi-Link Operation (MLO), allowing users to connect to 2.4 GHz, 5 GHz, and 6 GHz bands simultaneously.
8 spatial streams and Multiple Input Multiple Output (MIMO) protocol enhancements (initial 16 but removed from the specs in 2024).
Flexible Channel Utilization – Interference currently can negate an entire Wi-Fi channel. With preamble puncturing, a portion of the channel that is affected by interference can be blocked off while continuing to use the rest of the channel. This feature is mandatory for Wi-Fi 7 certification.
Multiple Resource Unit (MRU) – Improves OFDMA technology from Wi-Fi 6, allowing a single user to have multiple Resource Units. This feature is mandatory for Wi-Fi 7 certification.
Candidate features
The main candidate features mentioned in the 802.11be Project Authorization Request (PAR) are:
Multi-Access Point (AP) Coordination (e.g. coordinated and joint transmission).
Enhanced link adaptation and retransmission protocol (e.g. Hybrid Automatic Repeat Request (HARQ)).
If needed, adaptation to regulatory rules specific to 6GHz spectrum.[needs update]
12IEEE 802.11y-2008 extended operation of 802.11a to the licensed 3.7GHz band. Increased power limits allow a range up to 5,000m. As of 2009[update], it is only being licensed in the United States by the FCC.
123456789Based on short guard interval; standard guard interval is ~10% slower. Rates vary widely based on distance, obstructions, and interference.
12345678For single-user cases only, based on default guard interval which is 0.8 microseconds. Since multi-user via OFDMA has become available for 802.11ax, these may decrease. Also, these theoretical values depend on the link distance, whether the link is line-of-sight or not, interferences and the multi-path components in the environment.
12The default guard interval is 0.8 microseconds. However, 802.11ax extended the maximum available guard interval to 3.2 microseconds, in order to support outdoor communications, where the maximum possible propagation delay is larger compared to Indoor environments.
The 802.11be Task Group is led by individuals affiliated with Qualcomm, Intel, and Broadcom. Those affiliated with Huawei, Maxlinear, NXP, and Apple also have senior positions.
Commercial availability
Hardware
The Wi-Fi Alliance maintains a list of Wi-Fi 7 certified devices.
Software
Android 13 and higher provide support for Wi-Fi 7.
The Linux 6.2 kernel provides support for Wi-Fi 7 devices. The 6.4 kernel added Wi-Fi 7 mesh support. Linux 6.5 included significant driver support by Intel engineers, particularly support for MLO.
Support for Wi-Fi 7 was added to Windows 11, as of build 26063.1.
Notes
↑MCS 9 is not applicable to all combinations of channel width and spatial stream count.
↑Giordano, Lorenzo; Geraci, Giovanni; Carrascosa, Marc; Bellalta, Boris (21 November 2023). "What Will Wi-Fi 8 Be? A Primer on IEEE 802.11bn Ultra High Reliability". IEEE Communications Magazine. 62 (8): 126. arXiv:2303.10442. Bibcode:2024IComM..62h.126G. doi:10.1109/MCOM.001.2300728.
↑Fang, Bradley; Roger, Michael (2025). "Road Rules for Radio: Why Your Wi-Fi Got Better". arXiv:2512.23901 [cs.NI].
↑López-Pérez, David (12 February 2019). "IEEE 802.11be – Extremely High Throughput: The Next Generation of Wi-Fi Technology Beyond 802.11ax". arXiv:1902.04320 [cs.IT].
↑IEEE Standard for Information Technology- Telecommunications and Information Exchange Between Systems- Local and Metropolitan Area Networks- Specific Requirements Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. doi:10.1109/ieeestd.2003.94282. ISBN0-7381-3701-4.