| Computing desk | ||
|---|---|---|
| < December 2 | << Nov | December | Jan >> | December 4 > |
| Welcome to the Wikipedia Computing Reference Desk Archives |
|---|
| The page you are currently viewing is an archive page. While you can leave answers for any questions shown below, please ask new questions on one of the current reference desk pages. |
What tools do we have to analyze a possibly physically damaged HDD thatcan still be detected?--Senteni (talk) 17:45, 3 December 2014 (UTC)
Are you confusing a disk with borked partition table so you can't see any of the partitions to a disk which is physically unreadable? These are quite different things and should not be confused.
If the disk can't be read, you're basically SOL as an end user. Okay there are various things you can try like freezing the disk, but these should only be tried once you've at least attempted to image the disk. They also aren't software. Despite the hype over SpinRite, there's no software tools which can help with a physically damaged disk that's unreadable.
If the disk is damaged but still partially readable, the best you can hope for is a tool which lets you select how many times to try re-reading (keep it to 1 or even zero) and recording what part of the image failed to read properly. This way, you can if you want, try and reread the damaged parts more times later after you've taken your first pass (so you're not not worried about further damage), although you're chance of recovering more is slim. (As I mentioned, if you can afford it you shouldn't do anything, instead pay for a professional recovery service.) There's not really much you can do with software to try and read the disk more beyond trying and trying again.
To be clear, once you have an image, there are plenty of tools you can use to try and recover data from a image/backup of the image (like PhotoRec, TestDisk etc etc), but that's quite a distinct point and it's vitally important you have the image first, particularly in the case of a physically damaged disk.
P.S. In case it still isn't clear, when I say image I mean an image of the entire disk from the first sector to the last (or at least the readable parts thereof) such as made with dd or plenty of other tools. This doesn't require the partition tables can be understood or anything like that, it just requires the disk can be detected by the computer and is at least partially readable.
P.S. If you don't want to recover data but simply want to try and work out if the disk may be useable for non mission critical data, I apologise as I found your question fairly unclear. In the later case, I would suggest one or more S.M.A.R.T. tools, perhaps one from your HD manufacturer and one which submits data online for comparison purposes like SpeedFan. You should run a full surface scan using one of these tools, probably one from your manufacturer. Ideally you should always zero fill or otherwise overwrite the entire disk to see if writing is okay. And probably do a surface scan again after zero filling. It may also be helpful to run a full (not partial) speed test on the HD with something like HD Tune and look for any unexpected spikes during reading (and if possible) writing. (Try to keep CPU and HD controller usage to a minimum while testing the speed.) See for an example from a hopefully (it's mine) healthy disk. Bear in mind these tools will often not detect problems until it's way too late, so if you have a good reason to think the disk is physically damaged you shouldn't be using it for anything important. As mentioned before physically damaged or not, you shouldn't be using it to store the sole copy of anything you can't afford to lose.)
Nil Einne (talk) 18:30, 3 December 2014 (UTC)
Hi there. I have a Dell R5400 (a rack mount). It is a good machine that has served me well. The OS is Windows7 now. The size of the internal disk where the OS resides as well as all my major software is 275 GB. I feel it is a bit restrictive now. I run an Oracle VB with Ubuntu Virtual Machine (VM) and it is where I do all my stuff now. I've also made a mistake of allocating not enough memory to the VM. I cannot update the Ubuntu now, I get errors that I do not have enough memory, etc. I've made this plan and want to hear comments if it is realistic.
I do have a second OS on the second inernal drive. It is a MS Server. So, I want to start it, open cmd prompt in there and use this command: C:\copy *.* G:\*.* By G: I mean an external drive which has a terabyte or so capacity. Hopefully every byte from C:\ will end up there. Then I will purchase a 600 GB Lenovo 15,000 rpm internal drive, insert it in place of my old internal drive C: and copy all code back to it. Some Dell computers have slots for two additional internal drives. Mine does not.
Is it going to work? Thanks, --AboutFace 22 (talk) 20:04, 3 December 2014 (UTC)
Thank you. I do back up regularly. Now I will have to look into it all carefully. --AboutFace 22 (talk) 15:35, 4 December 2014 (UTC)
dd if=/dev/sdx of=/dev/sdy bs=1M
NorwegianBlue, thank you. It is a cute idea. It would not be difficult for me to implement it. --AboutFace 22 (talk) 01:10, 5 December 2014 (UTC)
I have a Cisco/Linksys AE2500. Everything in DD-WRT is setup for maximum security, including a 63-character WPA2 password. I have been the target of harassment in the past, and have been hacked, despite the aforementioned security measures. Is the following merely marketing: Box Security If no, any cheaper alternatives? FM99717731 (talk) 20:21, 3 December 2014 (UTC)
Thanks for your inputs. I believe the main reason I got hacked was my general carelessness with CTRL-C and CTRL-V, plus the fact that I use a clipboard logger. (Ditto) One would only need a packet sniffer and voilà. FM99717731 (talk) 03:05, 5 December 2014 (UTC)
I am using Microsoft Access 2010 on a Windows 7 desktop computer. I created a new database and am trying to print Avery 5162 address labels containing two lines of name fields, one line of address, and one line of city-state-ZIP. I used the Label Wizard to generate a report to produce the labels. When I print the labels, the first line positions above the top of the first label. I have used the same technique with other Access tables to generate Avery 5162 labels, and have compared the Properties of the report and the section of the report that generates a label, and I don’t see any obvious difference, and my existing reports render the labels correctly, but the new report renders the label above the top of the page. I can arbitrarily correct the problem by adding height to the report page header, but that seems kludgy. Does anyone have any suggestions for what I should look at? Robert McClenon (talk) 20:52, 3 December 2014 (UTC)