Polyoxometalates (POMs) are a class of inorganic compounds containing only transition metal(s) (M) and oxide (O2−) with general moleclur formula [MmOo]k− with m≥3, o≥9, k>0. This article focuses on the isopolyoxometalates, where only one metallic element is involved. The heteropolyoxometalates are very similar but contain more than one metal cation.
Formation
The oxides of d0 metals such as V2O5, MoO3, WO3 dissolve at high pH to give orthometalates, VO43−, MoO42−, WO42−. For Nb2O5 and Ta2O5. The nature of the dissolved species at high pH is less defined, but these oxides also form polyoxometalates.
As the pH is lowered, solutions of orthometalates give oxide–hydroxide compounds such as WO3(OH)− and VO3(OH)2−, these species condense via the process of olation. The replacement of terminal M=O bonds, which have triple bond character, is compensated by the increase in coordination number. The nonobservation of polyoxochromate cages is rationalized by the small radius of Cr(VI), which may not accommodate octahedral coordination geometry.
An abbreviated condensation sequence illustrated with vanadates is:
4 VO43− + 8 H+ → V4O124− + 4 H2O
5 V4O124− + 12 H+ → 2 [V10O26(OH)2]4− + 4 H2O
When such acidifications are conducted in the presence of phosphate or silicate, heteropolymetalate can result. For example, the phosphotungstate anionPW12O403− consists of a framework of twelve octahedral tungsten oxyanions surrounding a central phosphate group.
History
Dr. James F. Keggin, the discoverer of the Keggin structure
The 1970s witnessed the introduction of quaternary ammonium salts of POMs. This innovation enabled systematic study without the complications of hydrolysis and acid/base reactions. The introduction of 17O NMR spectroscopy allowed the structural characterization of POMs in solution.
The first example of a mineral with a polyoxometalate cation, ramazzoite, was described in 2016 in Ramazzo Mine, Liguria, Italy.
Structure and bonding
The typical framework building blocks are polyhedral units, with 6-coordinate metal centers. Usually, these units share edges and/or vertices. The coordination number of the oxide ligands varies according to their location in the cage. Surface oxides tend to be terminal or doubly bridging oxo ligands. Interior oxides are typically triply bridging or even octahedral. POMs are sometimes viewed as soluble fragments of metal oxides.
Recurring structural motifs allow POMs to be classified. Iso-polyoxometalates (isopolyanions) feature octahedral metal centers. The heteropolymetalates form distinct structures because the main group center is usually tetrahedral. The Lindqvist and Keggin structures are common motifs for iso- and heteropolyanions, respectively.
Polyoxometalates typically exhibit coordinate metal-oxo bonds of different multiplicity and strength. In a typical POM such as the Keggin structure PW12O403−, each addenda center connects to single terminal oxo ligand, four bridging μ2-O ligands and one bridging μ3-O deriving from the central heterogroup. Metal–metal bonds in polyoxometalates are normally absent and owing to this property, F. Albert Cotton opposed to consider polyoxometalates as a form of cluster materials. However, metal-metal bonds are not completely absent in polyoxometalates and they are often present among the highly reduced species.
Paratungstate B, also called dihydrogen paratungstate, H2W12O4210−
Mo36-polymolybdate, [Mo36O112(H2O)16]8−
Polymolybdates and tungstates
The polymolybdates and polytungstates are derived, formally at least, from the dianionic MO42− precursors. The most common units for polymolybdates and polyoxotungstates are the octahedral {MO6} centers, sometimes slightly distorted. Some polymolybdates contain pentagonal bipyramidal units. These building blocks are found in the molybdenum blues, which are mixed valence compounds.
Polyoxotechnetates and rhenates
The structure of the polyanion Tc20O684−
Polyoxotechnetates form only in strongly acidic conditions, such as in HTcO4 or trifluoromethanesulfonic acid solutions. The first empirically isolated polyoxotechnetate was the red Tc20O684−. It contains both Tc(V) and Tc(VII) in ratio 4: 16 and is obtained as the hydronium salt (H7O3)4Tc20O68·4H2O by concentrating an HTcO4 solution. Corresponding ammonium polyoxotechnetate salt was recently isolated from trifluoromethanesulfonic acid and it has very similar structure.
The only polyoxorhenate formed in acidic conditions in presence of pyrazolium cation. The first empirically isolated polyoxorhenate was the white Re4O152−. It contains Re(VII) in both octahedral and tetrahedral coordination.
Mixed polyoxo(technetate-rhenate) [Tc4O4(H2O)2(ReO4)14]2− polyanion crystals that contain Tc(V) and Re(VII)were also isolated and structurally characterized.
Polyoxotantalates, niobates, and vanadates
The polyniobates, polytantalates, and vanadates are derived, formally at least, from highly charged MO43− precursors. For Nb and Ta, most common members are M6O198− (M = Nb, Ta), which adopt the Lindqvist structure. These octaanions form in strongly basic conditions from alkali melts of the extended metal oxides (M2O5), or in the case of Nb even from mixtures of niobic acid and alkali metal hydroxides in aqueous solution. The hexatantalate can also be prepared by condensation of peroxotantalate [Ta(O2)4]3− in alkaline media. These polyoxometalates display an anomalous aqueous solubility trend of their alkali metal salts inasmuch as their Cs+ and Rb+ salts are more soluble than their Na+ and Li+ salts. The opposite trend is observed in group 6 POMs.
The decametalates with the formula M10O286− (M = Nb, Ta) are isostructural with decavanadate. They are formed exclusively by edge-sharing {MO6} octahedra (the structure of decatungstate W10O324− comprises edge-sharing and corner-sharing tungstate octahedra).
Two views of a [Mo154(NO)14On]z− cluster, omitting water and counter ions. Also shown is the X-ray powder pattern for the salt.
Polyoxomolybdates include the wheel-shaped molybdenum blue anions and spherical "keplerates". The cluster [Mo154O420(NO)14(OH)28(H2O)70]20− consists of more than 700 atoms. The anion is in the form of a tire (the cavity has a diameter of more than 20Å) and a large inner and outer surface.
Oxoalkoxometalates
Oxoalkoxometalates are clusters that contain both oxide and alkoxide ligands. Typically they lack terminal oxo ligands. Examples include the dodecatitanate Ti12O16(OPri)16, the iron oxoalkoxometalates and iron and copper Keggin ions.
Sulfido, imido, and other O-replaced oxometalates
The terminal oxide centers of polyoxometalate framework can in certain cases be replaced with other ligands, such as S2−, Br−, and NR2−. Sulfur-substituted POMs are called polyoxothiometalates. Other ligands replacing the oxide ions have also been demonstrated, such as nitrosyl and alkoxy groups.
Polyfluoroxometalate are yet another class of O-replaced oxometalates.
Other
Numerous hybrid organic–inorganic materials that contain POM cores.
Illustrative of the diverse structures of POM is the ion CeMo12O428−, which has face-shared octahedra with Mo atoms at the vertices of an icosahedron.
Uses
POMs are employed as commercial catalysts for oxidation of organic compounds.
Research
Lanthanides can behave like Lewis acids and perform catalytic properties. Lanthanide-containing polyoxometalates show chemoselectivity and are also able to form inorganic–organic adducts, which can be exploited in chiral recognition.
POM-based aerobic oxidations have been promoted as alternatives to chlorine-based wood pulp bleaching processes, a method of decontaminating water, and a method to catalytically produce formic acid from biomass (OxFA process). Polyoxometalates have been shown to catalyse water splitting.
Molecular electronics
Some POMs exhibit unusual magnetic properties, which has prompted visions of many applications. One example is storage devices called qubits. non-volatile (permanent) storage components, also known as flash memory devices.
Drugs
Certain POMs have been considered as possible drugs and antiviral drugs, as well as antibacterial and antiviral uses.
↑Pope, M. T. (1983). Heteropoly and Isopoly Oxometalates. New York: Springer Verlag. ISBN978-3-662-12006-4.
12Gouzerh, P.; Che, M. (2006). "From Scheele and Berzelius to Müller: polyoxometalates (POMs) revisited and the "missing link" between the bottom up and top down approaches". L'Actualité Chimique. 298: 9.
↑German, Konstantin E.; Fedoseev, Alexander M.; Grigoriev, Mikhail S.; Kirakosyan, Gayane A.; Dumas, Thomas; Den Auwer, Christophe; Moisy, Philippe; Lawler, Keith V.; Forster, Paul M.; Poineau, Frederic (24 September 2021). "A 70-Year-Old Mystery in Technetium Chemistry Explained by the New Technetium Polyoxometalate [H7O3]4[Tc20O68]⋅4H2O". Chemistry – A European Journal. 27 (54): 13624–13631. doi:10.1002/chem.202102035. OSTI1811927. PMID34245056. S2CID235787236.
↑Volkov, Mikhail A.; Novikov, Anton P.; Borisova, Nataliya E.; Grigoriev, Mikhail S.; German, Konstantin E. (10 August 2023). "Intramolecular Re···O Nonvalent Interactions as a Stabilizer of the Polyoxorhenate(VII)". Inorganic Chemistry. 62 (33): 13485–13494. doi:10.1021/acs.inorgchem.3c01863. PMID37599582.
↑Fullmer, L. B.; Molina, P. I.; Antonio, M. R.; Nyman, M. (2014). "Contrasting ion-association behaviour of Ta and Nb polyoxometalates". Dalton Trans. 2014 (41): 15295–15299. doi:10.1039/C4DT02394C. PMID25189708.
↑Anderson, T. M.; Thoma, S. G.; Bonhomme, F.; Rodriguez, M. A.; Park, H.; Parise, J. B.; Alan, T. M.; Larentzos, J. P.; Nyman, M. (2007). "Lithium Polyniobates. A Lindqvist-Supported Lithium−Water Adamantane Cluster and Conversion of Hexaniobate to a Discrete Keggin Complex". Crystal Growth & Design. 7 (4): 719–723. Bibcode:2007CrGrD...7..719A. doi:10.1021/cg0606904.
↑Graeber, E. J.; Morosin, B. (1977). "The molecular configuration of the decaniobate ion (Nb17O286−)". Acta Crystallographica B. 33 (7): 2137–2143. doi:10.1107/S0567740877007900.
↑Matsumoto, M.; Ozawa, Y.; Yagasaki, A.; Zhe, Y. (2013). "Decatantalate—The Last Member of the Group 5 Decametalate Family". Inorg. Chem. 52 (14): 7825–7827. doi:10.1021/ic400864e. PMID23795610.
12Pope, Michael Thor; Müller, Achim (1994). Polyoxometalates: From Platonic Solids to Anti-Retroviral Activity. Springer. ISBN978-0-7923-2421-8.
↑Day, V. W.; Eberspacher, T. A.; Klemperer, W. G.; Park, C. W. (1993). "Dodecatitanates: a new family of stable polyoxotitanates". J. Am. Chem. Soc. 115 (18): 8469–8470. Bibcode:1993JAChS.115.8469D. doi:10.1021/ja00071a075.
↑,Bino, Avi; Ardon, Michael; Lee, Dongwhan; Spingler, Bernhard; Lippard, Stephen J. (2002). "Synthesis and Structure of [Fe13O4F24(OMe)12]5−: The First Open-Shell Keggin Ion". J. Am. Chem. Soc. 124 (17): 4578–4579. Bibcode:2002JAChS.124.4578B. doi:10.1021/ja025590a. PMID11971702.
↑Gouzerh, P.; Jeannin, Y.; Proust, A.; Robert, F.; Roh, S.-G. (1993). "Functionalization of polyoxomolybdates: the example of nitrosyl derivatives". Mol. Eng. 3 (1–3): 79–91. doi:10.1007/BF00999625. S2CID195235379.
↑Schreiber, Roy E.; Avram, Liat; Neumann, Ronny (2018). "Self-Assembly through Noncovalent Preorganization of Reactants: Explaining the Formation of a Polyfluoroxometalate". Chemistry - A European Journal. 24 (2): 369–379. doi:10.1002/chem.201704287. PMID29064591.
↑Song, Y.-F.; Long, D.-L.; Cronin, L. (2007). "Non covalently connected frameworks with nanoscale channels assembled from a tethered polyoxometalate–pyrene hybrid". Angew. Chem. Int. Ed. 46 (21): 3900–3904. doi:10.1002/anie.200604734. PMID17429852.
↑Guo, Hong-Xu; Liu, Shi-Xiong (2004). "A novel 3D organic–inorganic hybrid based on sandwich-type cadmium heteropolymolybdate: [Cd4(H2O)2(2,2′-bpy)2] Cd[Mo6O12(OH)3(PO4)2(HPO4)2]2 [Mo2O4(2,2′-bpy)2]2·3H2O". Inorganic Chemistry Communications. 7 (11): 1217. doi:10.1016/j.inoche.2004.09.010.
↑Blazevic, Amir; Rompel, Annette (January 2016). "The Anderson–Evans polyoxometalate: From inorganic building blocks via hybrid organic–inorganic structures to tomorrows "Bio-POM"". Coordination Chemistry Reviews. 307: 42–64. doi:10.1016/j.ccr.2015.07.001.
↑Dexter, D. D.; Silverton, J. V. (1968). "A New Structural Type for Heteropoly Anions. The Crystal Structure of (NH4)2H6(CeMo12O42)·12H2O". J. Am. Chem. Soc. 1968 (13): 3589–3590. Bibcode:1968JAChS..90.3589D. doi:10.1021/ja01015a067.
↑Misono, Makoto (1993). "Catalytic chemistry of solid polyoxometalates and their industrial applications". Mol. Eng. 3 (1–3): 193–203. doi:10.1007/BF00999633. S2CID195235697.
↑Kozhevnikov, Ivan V. (1998). "Catalysis by Heteropoly Acids and Multicomponent Polyoxometalates in Liquid-Phase Reactions". Chem. Rev. 98 (1): 171–198. doi:10.1021/cr960400y. PMID11851502.
↑Gaspar, A. R.; Gamelas, J. A. F.; Evtuguin, D. V.; Neto, C. P. (2007). "Alternatives for lignocellulosic pulp delignification using polyoxometalates and oxygen: a review". Green Chem. 9 (7): 717–730. doi:10.1039/b607824a.
↑Hiskia, A.; Troupis, A.; Antonaraki, S.; Gkika, E.; Kormali, P.; Papaconstantinou, E. (2006). "Polyoxometallate photocatalysis for decontaminating the aquatic environment from organic and inorganic pollutants". Int. J. Env. Anal. Chem. 86 (3–4): 233. Bibcode:2006IJEAC..86..233H. doi:10.1080/03067310500247520. S2CID93535976.
↑Wölfel, R.; Taccardi, N.; Bösmann, A.; Wasserscheid, P. (2011). "Selective catalytic conversion of biobased carbohydrates to formic acid using molecular oxygen". Green Chem. 13 (10): 2759. doi:10.1039/C1GC15434F.
↑Busche, C.; Vila-Nadal, L.; Yan, J.; Miras, H. N.; Long, D.-L.; Georgiev, V. P.; Asenov, A.; Pedersen, R. H.; Gadegaard, N.; Mirza, M. M.; Paul, D. J.; Poblet, J. M.; Cronin, L. (2014). "Design and fabrication of memory devices based on nanoscale polyoxometalate clusters". Nature. 515 (7528): 545–549. Bibcode:2014Natur.515..545B. doi:10.1038/nature13951. PMID25409147. S2CID4455788.
Long, D. L.; Burkholder, E.; Cronin, L. (2007). "Polyoxometalate Clusters, Nanostructures and Materials: From Self-Assembly to Designer Materials and Devices". Chem. Soc. Rev. 36 (1): 105–121. doi:10.1039/b502666k. PMID17173149.
Pope, M. T.; Müller, A. (1991). "Polyoxometalate Chemistry: An Old Field with New Dimensions in Several Disciplines". Angew. Chem. Int. Ed. Engl. 30: 34–48. doi:10.1002/anie.199100341.