Coronado 25

Coronado 25
Development
DesignerEd Edgar and Frank W. Butler
LocationUnited States
Year1966
BuildersCoronado Yachts
Russell Marine
RoleCruiser
Boat
Displacement4,500 lb (2,041 kg)
Draft3.67 ft (1.12 m)
Hull
Typemonohull
Constructionfiberglass
LOA25.00 ft (7.62 m)
LWL20.05 ft (6.11 m)
Beam8.00 ft (2.44 m)
Engineoutboard motor
Hull appendages
Keelfin keel
Ballast2,150 lb (975 kg)
Rudderinternally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height
31.50 ft (9.60 m)
J foretriangle base
9.00 ft (2.74 m)
P mainsail luff
27.75 ft (8.46 m)
E mainsail foot
11.90 ft (3.63 m)
Sails
Sailplanmasthead sloop
Mainsail area165.11 sq ft (15.339 m2)
Jib/genoa area
141.75 sq ft (13.169 m2)
Total sail area
306.86 sq ft (28.508 m2)
Rating
PHRF231

The Coronado 25 is a recreational keelboat built by Coronado Yachts in the United States from 1966 to 1975. It was also built by Russell Marine in the United Kingdom.

Designed by Ed Edgar and Frank W. Butler the fiberglass hull has a spooned, raked stem; a raised counter, angled transom; an internally mounted spade-type rudder controlled by a tiller. It has a hull speed of 6.0 kn (11.1 km/h). It was available with a centerboard or fixed keel.

It has sleeping accommodation for five people, with a double "V"-berth, a dinette table that lowers into a double berth in the main cabin and an aft quarter berth on the port side. The galley is located on the port side just forward of the companionway ladder. The galley is equipped with a two-burner stove, an icebox and a sink. The head is located just aft of the bow cabin on the starboard side. Cabin headroom is 66 in (170 cm).

It has a masthead sloop rig.