List of EN standards

European Standards (abbreviated EN, from the German name Europäische Norm ("European standard")) are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).

EN 1–999

EN 1: Flued oil stoves with vaporizing burners
EN 2: Classification of fires
EN 3: Portable fire extinguishers
EN 14: Dimensions of bed blankets
EN 19: Industrial valves – Marking of metallic valves
EN 20: Wood preservatives.
EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
EN 40: Lighting columns
- EN 40-1: Part 1: Definitions and terms
- EN 40-2: Part 2: General requirements and dimensions
- EN 40-3-1: Part 3-1: Design and verification - Specification for characteristic loads
- EN 40-3-2: Part 3-2: Design and verification - Verification by testing
- EN 40-3-3: Part 3-3: Design and verification - Verification by calculation
- EN 40-4: Part 4: Requirements for reinforced and prestressed concrete lighting columns
- EN 40-5: Part 5: Requirements for steel lighting columns
- EN 40-6: Part 6: Requirements for aluminium lighting columns
- EN 40-7: Part 7: Requirements for fibre reinforced polymer composite lighting columns
EN 54: Fire detection and fire alarm systems
EN 71: Safety of toys
EN 81: Safety of lifts and escalators

EN 115: Safety of escalators & Moving walks
EN 124: Gully tops and manhole tops for vehicular and pedestrian areas
EN 131: Ladders
EN 136: Respiratory protective devices – Full-face masks – Requirements, testing and marking
EN 137: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking
EN 140: Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking
EN 142: Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking
EN 143: Respiratory protective devices – Particle filters – Requirements, testing, marking
EN 144: Respiratory protective devices – Gas cylinder valves
- EN 144-1: Part 1: Thread connections for insert connector
- EN 144-2: Part 2: Outlet connections
- EN 144-3: Part 3: Outlet connections for diving gases Nitrox and oxygen
EN 145 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking
EN 148 Respiratory protective devices – Threads for facepieces
- EN 148-1: Part 1: Standard thread connection
- EN 148-2: Part 2: Centre thread connection
- EN 148-3: Part 3: Tread connection M 45 x 3
EN 149: Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking
EN 166: Personal eye-protection – Specifications
EN 169: Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use
EN 170: Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use
EN 172: Personal eye protection – Sunglare filters for industrial use
EN 174: Personal eye-protection – Ski goggles for downhill skiing
EN 175: Personal protection – Equipment for eye and face protection during welding and allied processes
EN 196: Methods for testing cement (10 parts)
EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements
EN 197-2: Cement – Part 2 : Conformity evaluation
EN 206-1: Concrete – Part 1: Specification, performance, production and conformity
EN 207: Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 208: Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 228: Specifications for automotive petrol
EN 250: Respiratory equipment – Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking
EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests
EN 286: Simple unfired pressure vessels designed to contain air or nitrogen
- Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
- Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 287: Qualification test of welders — Fusion welding
- Part 1: Steels
EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 301 549: European standard for digital accessibility
EN 336: Structural timber — Sizes, permitted deviations
EN 338: Structural timber — Strength classes
EN 341: Personal protective equipment against falls from a height. Descender devices
EN 342: Protective clothing – Ensembles and garments for protection against cold
EN 343: Protective clothing – Protection against rain

EN 352: Hearing protectors – General requirements
- EN 352-1: Part 1: Earmuffs
- EN 352-2: Part 2: Earplugs
- EN 352-3: Part 3: Earmuffs attached to head protection and/or face protection devices
EN 352: Hearing protectors – Safety requirements
- EN 352-4: Part 4: Level-dependent earmuffs
- EN 352-5: Part 5: Active noise reduction earmuffs
- EN 352-6: Part 6: Earmuffs with safety-related audio input
- EN 352-7: Part 7: Level-dependent earplugs
- EN 352-8: Part 8: Entertainment audio earmuffs
- EN 352-9: Part 9: Earplugs with safety-related audio input
- EN 352-10: Part 10: Entertainment audio earplugs
EN 353-1: Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line
EN 353-2: Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line
EN 354: Personal fall protection equipment – Lanyards
EN 355: Personal protective equipment against falls from a height – Energy absorbers
EN 358: Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint
EN 360: Personal fall protection equipment – Retractable type fall arresters
EN 361: Personal protective equipment against falls from a height – Full body harnesses
EN 362: Personal protective equipment against falls from a height – Connectors
EN 363: Personal protective equipment against falls from a height – Fall arrest systems
EN 365: Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
EN ISO 374: Protective gloves against dangerous chemicals and micro-organisms
- EN ISO 374-1: Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
- EN ISO 374-5: Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
EN 379: Personal eye-protection – Automatic welding filters
EN 381: Protective clothing for users of hand-held chain saws
- EN 381-5: Part 5: Requirements for leg protectors
- EN 381-7: Part 7: Requirements for chainsaw protective gloves
- EN 381-9: Part 9: Requirements for chain saw protective gaiters
- EN 381-11: Part 11: Requirements for upper body protectors
EN 386: Glued laminated timber - Performance requirements and minimum production requirements
EN 388: Protective gloves against mechanical risks
EN 390: Glued laminated timber. Sizes. Permissible deviations
EN 391: Glued laminated timber - Delamination tests of glue lines
EN 392: Glued laminated timber - Shear test of glue lines
EN 397: Industrial safety helmets
EN 402: Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking
EN 403: Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking
EN 404: Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly
EN 405: Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking
EN 407: Protective gloves against thermal risks (heat and/or fire)
EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties
EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
EN 420: Protective gloves – General requirements and test methods
EN 421: Protective gloves against ionizing radiation and radioactive contamination
EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994)
EN 443: Helmets for fire fighting in buildings and other structures
EN 450: Fly ash for concrete - Definitions, requirements and quality control
EN 469: Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities
EN 474: Earth-moving Machinery. Safety. General Requirements
EN 510: Specification for protective clothing for use where there is a risk of entanglement with moving parts
EN 511: Protective gloves against cold
EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)
EN 564: Mountaineering equipment – Accessory cords – Safety requirements and test methods
EN 565: Mountaineering equipment – Tape – Safety requirements and test methods
EN 566: Mountaineering equipment – Slings – Safety requirements and test methods
EN 567: Mountaineering equipment – Rope clamps – Safety requirements and test methods
EN 568: Mountaineering equipment – Ice anchors – Safety requirements and test methods
EN 569: Mountaineering equipment – Pitons – Safety requirements and test methods
EN 590: Specification for automotive diesel
EN 631: Containers for foodstuffs
EN 659: Protective gloves for firefighters
EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
EN 716: Children's cots and folding cots for domestic use
EN 795: Personal fall protection equipment – Anchor devices
EN 805: Water supply. Requirements for systems and components outside buildings
EN 812: Industrial bump caps
EN 813: Personal fall protection equipment – Sit harnesses
EN 837: Pressure connections
EN 840: Mobile waste containers.
EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
EN 892: Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
EN 893: Mountaineering equipment – Crampons – Safety requirements and test methods
EN 926: Paragliding equipment - Paragliders
- EN 926-1: Part 1: Requirements and test methods for structural strength
- EN 926-2: Part 2: Requirements and test methods for classifying flight safety characteristics
EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
EN 943: Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols
- EN 943-1: Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
- EN 943-2: Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)
EN 958: Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
EN 966: Helmets for airborne sports
EN 980: Symbols for use in the labeling of medical devices

EN 1000–1989

EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
EN 1010-5: Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board
EN 1069: Water slides of 2 m height and more
EN 1073-1: Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
EN 1073-2: Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
EN 1077: Helmets for alpine skiers and snowboarders
EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates
EN 1080: Impact protection helmets for young children
EN 1082: Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives
- EN 1082-1: Part 1: Chain mail gloves and arm guards
- EN 1082-2: Part 2: Gloves and arm guards made of material other than chain mail
EN 1090: Execution of steel structures and aluminium structures (3 parts)
EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
EN 1146: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking
EN 1149-5: Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
EN 1150: Protective clothing – Visibility clothing for non-professional use – Test methods and requirements
EN 1168: Precast concrete products - Hollow core slabs
EN 1176-1: Playground equipment. General safety requirements and test methods
EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
EN 1325:2014: Value Management. Vocabulary. Terms and definitions
- EN 1325-1:1997 Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis (withdrawn, replaced by EN 1325:2014)
EN 1337: Structural bearings
EN 1384: Helmets for equestrian activities
EN 1385: Helmets for canoeing and white water sports
EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
EN 1466: Child use and care articles - Carry cots and stands - Safety requirements and test methods
EN 1486: Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting
EN 1496: Personal fall protection equipment – Rescue lifting devices
EN 1497: Personal fall protection equipment – Rescue harnesses
EN 1679: Reciprocating internal combustion engines: Compression ignition engines
EN 1731: Personal eye protection – Mesh eye and face protectors
EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
EN 1827: Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking
EN 1846: Firefighting and rescue service vehicles
EN 1888-1: Child use and care articles - Wheeled child conveyances (Part 1: Pushchairs and prams—Up to 15 kg)
EN 1888-2: Child use and care articles - Wheeled child conveyances (Part 2: Pushchairs for children above 15 kg up to 22 kg)
EN 1891: Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes
EN 1938: Personal eye protection – Goggles for motorcycle and moped users
EN 1972: Diving equipment - Snorkels - Requirements and test methods

EN 1990–1999 (Eurocodes)

EN 1990: (Eurocode 0) Basis of structural design
EN 1991: (Eurocode 1) Actions on structures
EN 1992: (Eurocode 2) Design of concrete structures
EN 1993: (Eurocode 3) Design of steel structures
EN 1994: (Eurocode 4) Design of composite steel and concrete structures
EN 1995: (Eurocode 5) Design of timber structures
EN 1996: (Eurocode 6) Design of masonry structures
EN 1997: (Eurocode 7) Geotechnical design
EN 1998: (Eurocode 8) Design of structures for earthquake resistance
EN 1999: (Eurocode 9) Design of aluminium structures

EN 10000–10999

This range includes almost exclusively CEN Standards related to iron and steel.

EN 10002: Metallic Materials - Tensile Testing
- EN 10002-1: Method of Test at Ambient Temperature
- EN 10002-5: Method of testing at elevated temperatures
EN 10024: Hot rolled taper flange I sections. Tolerances on shape and dimensions
EN 10025: Hot rolled products of structural steels
- EN 10025-1: Part 1: General technical delivery conditions
- EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
- EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10027: Designation systems for steel.
- EN 10088-1 Stainless steels - Part 1: List of stainless steels
- EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- EN 10088-3 Stainless steels - Part 3: Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes;
EN 10149: Hot rolled flat products made of high yield strength steels for cold forming.
- EN 10149-1: General technical delivery conditions
- EN 10149-2: Technical delivery conditions for thermomechanically rolled steels
- EN 10149-3: Technical delivery conditions for normalized or normalized rolled steels
EN 10204: Metallic products - Types of inspection documents
EN 10216: Seamless steel tubes for pressure purposes
- EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
- EN 10216-3: Part 3: Alloy fine grain steel tubes
- EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN 10216-5: Part 5: Stainless steel tubes
EN 10217: Welded steel tubes for pressure purposes
- EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10217-3: Part 3: Alloy fine grain steel tubes
- EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- EN 10217-7: Part 7: Welded stainless steel tubes for pressure purposes at low and elevated temperature environment
EN 10220: Seamless and welded steel tubes — Dimensions and masses per unit length
EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
EN 10270-1: Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
EN 10270-2: Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
EN 10305: Steel tubes for precision applications — Technical delivery conditions
- Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

EN 12080, Railway applications — Axleboxes — Rolling bearings

EN 10357: Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses
EN ISO 10819: Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
EN ISO 10862: Small craft – Quick release system for trapeze harness (ISO 10862:2009)

EN 11000–19999

EN ISO 11393: Protective clothing for users of hand-held chainsaws
- EN ISO 11393-2: Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
- EN ISO 11393-4: Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
- EN ISO 11393-5: Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
- EN ISO 11393-6: Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
EN 12021: Respiratory equipment – Compressed gases for breathing apparatus
EN 12083: Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking
EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
EN 12104: Resilient floor coverings - Cork floor tiles - Specification
EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
EN 12209: Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
EN 12221: Changing units for domestic use
EN 12246: Quality classification of timber used in pallets and packaging
EN 12255: Wastewater treatment plants
- EN 12255-1: Part 1: General construction principles
- EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
- EN 12255-3: Part 3: Preliminary treatment
- EN 12255-4: Part 4: Primary settlement
- EN 12255-5: Part 5: Lagooning processes
- EN 12255-6: Part 6: Activated sludge process
- EN 12255-7: Part 7: Biological fixed-film reactors
- EN 12255-8: Part 8: Sludge treatment and storage
- EN 12255-9: Part 9: Odour control and ventilation
- EN 12255-10: Part 10: Safety principles
- EN 12255-11: Part 11: General data required
- EN 12255-12: Part 12: Control and automation
- EN 12255-13: Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
- EN 12255-14: Part 14: Disinfection
- EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
- EN 12255-16: Part 16: Physical (mechanical) filtration
EN 12270: Mountaineering equipment – Chocks – Safety requirements and test methods
EN 12275: Mountaineering equipment – Connectors – Safety requirements and test methods
EN 12276: Mountaineering equipment – Frictional anchors – Safety requirements and test methods
EN 12277: Mountaineering equipment – Harnesses – Safety requirements and test methods
EN 12278: Montaineering equipment – Pulleys – Safety requirements and test methods
EN 12281: Printing and business paper. Requirements for copy paper.
EN ISO 12312: Eye and face protection – Sunglasses and related eyewear
- EN ISO 12312-1: Part 1: Sunglasses for general use (ISO 12312-1:2013)
- EN ISO 12312-2: Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
EN 12345: Welding. Multilingual terms for welded joints with illustrations
EN ISO 12401: Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009)
EN ISO 12402: Personal flotation devices
- EN ISO 12402-2: Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020)
- EN ISO 12402-3: Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020)
- EN ISO 12402-4: Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020)
- EN ISO 12402-5: Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020)
- EN ISO 12402-6: Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020)
- EN ISO 12402-8: Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020)
EN 12477: Protective gloves for welders
EN 12492: Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods
EN 12566: Small wastewater treatment systems for up to 50 PT
- EN 12566-1: Part 1: Prefabricated septic tanks
- EN 12566-2: Part 2: Soil infiltration systems
- EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
- EN 12566-5: Part 5: Pretreated Effluent Filtration systems
- EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent
- EN 12566-7: Part 7: Prefabricated tertiary treatment units
EN 12572: Artificial climbing structures
EN 12600: Classification of Resistance of Glazing to Impact
EN 12663: Railway applications - Structural requirements of railway vehicle bodies
- Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
- Part 2: Freight wagons
EN 12797: Brazing – Destructive tests of brazed joints
EN 12799: Brazing – Non-destructive examination brazed joints
EN 12810: Facade scaffolds made of prefabricated parts
EN 12811: Temporary works equipment
EN 12841: Personal fall protection equipment – Rope access systems – Rope adjustment devices
EN 12845 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
EN 12896: Public Transport Reference Data Model
EN 12941: Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking
EN 12942: Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking
EN 12952: Water-Tube Boilers and Auxiliary Installations
EN 12973: Value Management
EN 12975-1: Thermal solar systems and components - Solar collectors
EN 13000: Cranes - Mobile Cranes
EN 13034: Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
EN 13061: Protective clothing – Shin guards for association football players – Requirements and test methods
EN 13089: Mountaineering equipment – Ice-tools – Safety requirements and test methods
EN 13103: Railway applications — Wheelsets and bogies — Non-powered axles — Design method
EN 13104: Railway applications — Wheelsets and bogies — Powered axles — Design method
EN 13133: "Brazing - Brazer approval" (2000)
EN 13138-1: Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn
EN 13145: Railway applications - Track - Wood sleepers and bearers
EN 13146: Railway applications - Track - Test methods for fastening systems
- EN 13146-1: Part 1: Determination of longitudinal rail restraint
- EN 13146-2: Part 2: Determination of torsional resistance
- EN 13146-3: Part 3: Determination of attenuation of impact loads
- EN 13146-4: Part 4: Effect of repeated loading
- EN 13146-5: Part 5: Determination of electrical resistance
- EN 13146-6: Part 6: Effect of severe environmental conditions
- EN 13146-7: Part 7: Determination of clamping force
- EN 13146-8: Part 8: In service testing
- EN 13146-9: Part 9: Determination of stiffness
EN 13158: Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods
EN 13162: Thermal insulation products for buildings - Factory made mineral wool (MW) products
EN 13165: Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products
EN 13178: Personal eye-protection – Eye protectors for snowmobile users
EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements
EN 13231: Railway applications - Track - Acceptance of works
- EN 13231-1: Part 1: Works on ballasted track - Plain line, switches and crossings
- EN 13231-2: Part 2: Acceptance of reprofiling rails in plain line, switches, crossings, and expansion devices
- EN 13231-3: withdrawn, replaced by EN 13231-2
- EN 13231-4: withdrawn, replaced by EN 13231-2
- EN 13231-5: Part 5: Procedures for rail reprofiling in plain line, switches, crossings, and expansion devices
EN 13260: Railway applications — Wheelsets and bogies — Wheelsets — Product requirements
EN 13261: Railway applications — Wheelsets and bogies — Axles — Product requirements
EN 13262: Railway applications — Wheelsets and bogies — Wheels — Product requirements
EN 13277: Protective equipment for martial arts
- EN 13277-1: Part 1: General requirements and test methods
- EN 13277-2: Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
- EN 13277-3: Part 3: Additional requirements and test methods for trunk protectors
- EN 13277-4: Part 4: Additional requirements and test methods for head protectors
- EN 13277-5: Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
- EN 13277-6: Part 6: Additional requirements and test methods for breast protectors for females
- EN 13277-7: Part 7: Additional requirements and test methods for hand and foot protectors
- EN 13277-8: Part 8: Additional requirements and test methods for karate face protectors
EN 13300: quality and classification of (interior) wall paint
EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
EN 13356: Visibility accessories for non-professional use – Test methods and requirements
EN 13402: Size designation of clothes
EN 13432: Compostable and biodegradable packaging
EN 13445: Unfired pressure vessels
EN 13480: Metallic industrial piping
EN 13484: Helmets for users of luges
EN 13501: Fire classification of construction products and building elements
EN 13537: Temperature ratings for sleeping bags
EN 13546: Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods
EN 13567: Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods
EN 13594: Protective gloves for motorcycle riders – Requirements and test methods
EN 13595: Protective clothing for professional motorcycle riders – Jackets, trousers and one piece or divided suits
- EN 13595-1: Part 1: General requirements
- EN 13595-2: Part 2: Test method for determination of impact abrasion resistance
- EN 13595-3: Part 3: Test method for determination of burst strength
- EN 13595-4: Part 4: Test methods for the determination of impact cut resistance
EN 13612: Performance evaluation of in-vitro diagnostic devices
EN 13634: Protective footwear for motorcycle riders – Requirements and test methods
EN 13640: Stability testing of in vitro diagnostic reagents
EN ISO 13688: Protective clothing – General requirements (ISO 13688:2013)
- EN 13749 Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames
EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
EN 13781: Protective helmets for drivers and passengers of snowmobiles and bobsleighs
EN 13794: Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking
EN 13803: Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider
EN 13832: Footwear protecting against chemicals
- EN 13832-2: Part 2: Requirements for limited contact with chemicals
- EN 13832-3: Part 3: Requirements for prolonged contact with chemicals
EN 13940:2016: System of concepts to support continuity of care
EN 13949: Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking
EN 13979: Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure
- Part 1: Forged and rolled wheels
EN ISO 13982: Protective clothing for use against solid particulates
- EN ISO 13982-1: Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
EN ISO 13998: Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)
EN 14021: Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods
EN 14033: Railway applications — Track — Railbound construction and maintenance machines
- Part 1: Technical requirements for running
- Part 2: Technical requirements for travelling and working
- Part 3: General safety requirements
EN 14052: High performance industrial helmets
EN 14058: Protective clothing – Garments for protection against cool environments
EN 14067: Railway applications — Aerodynamics
- Part 1: Symbols and units
- Part 3: Aerodynamics in tunnels
- Part 4: Requirements and test procedures for aerodynamics on open track
- Part 5: Requirements and test procedures for aerodynamics in tunnels
- Part 6: Requirements and test procedures for cross wind assessment
EN 14081: Timber structures - Strength graded structural timber with rectangular cross section
- Part 1: General requirements
- Part 2: Machine grading - additional requirements for initial type testing.
- Part 3: Machine grading - additional requirements for factory production control.
- Part 4: Machine grading - grading machine settings for machine controlled systems.
EN 14120: Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods
EN 14126: Protective clothing – Performance requirements and tests methods for protective clothing against infective agents
EN 14143: Respiratory equipment – Self-contained re-breathing diving apparatus
EN 14214: The pure biodiesel standard
EN 14225: Diving suits
- EN 14225-1: Part 1: Wet suits – Requirements and test methods
- EN 14225-2: Part 2: Dry suits – Requirements and test methods
- EN 14225-3: Part 3: Actively heated or cooled suit systems and components – Requirements and test methods
EN 14328: Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods
EN 14363: Railway applications — Testing and Simulation for the acceptance of running characteristics of railway vehicles — Running Behaviour and stationary tests
EN 14387: Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking
EN 14435: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking
EN 14450: Secure storage units — Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
EN 14458: Personal eye-equipment – High performance visors intended only for use with protective helmets
EN ISO 14460: Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999)
EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
EN 14529: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
EN 14531: Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking
- Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
- Part 2: Step by step calculations for train sets or single vehicles
EN 14535: Railway applications — Brake discs for railway rolling stock
- Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
EN 14593-1: Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking
EN 14594: Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking
EN 14601: Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe
EN 14605: Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
EN 14683: Medical face masks — Requirements and test method
EN ISO 14877: Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
EN 14988: Children's High chairs
- Part 1: Safety requirements
- Part 2: Test methods
EN ISO 15027: Immersion suits
- EN ISO 15027-1: Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
- EN ISO 15027-2: Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
EN 15090: Footwear for firefighters
EN 15151-1: Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods
EN 15152: Railway applications — Front windscreens for train cabs
EN 15153: Railway applications — External visible and audible warning devices
- Part 1: Head, marker and tail lamps
- Part 2: Warning horns
EN 15179: Railway applications — Braking — Requirements for the brake system of coaches
EN 15220: Railway applications — Brake indicators
EN 15227: Railway applications — Crashworthiness requirements for railway vehicle bodies
EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics
EN 15273: Railway applications - Gauges
- Part 1: General - Common rules for infrastructure and rolling stock
- Part 2: Rolling stock gauge
- Part 3: Structure gauges
EN 15313: Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance
EN 15329: Railway applications — Braking — Brake block holder and brake shoe key for railway vehicles
EN 15333: Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus
- EN 15333-1: Part 1: Demand apparatus
- EN 15333-2: Part 2: Free flow apparatus
EN 15355: Railway applications — Braking — Distributor valves and distributor-isolating devices
EN 15427 Railway applications - Wheel/Rail friction management
- Part 1-1: Equipment and Application – Flange lubrication
- Part 1-2: Equipment and Application – Top of Rail materials
- Part 1-3: Equipment and Application – Adhesion materials
- Part 2-1: Properties and Characteristics – Flange lubricants
- Part 2-2: Properties and Characteristics – Top of Rail materials
- Part 2-3: Properties and Characteristics – Adhesion materials
EN 15437: Railway applications — Axlebox condition monitoring — Interface and design requirements
- Part 1: Track side equipment and rolling stock axlebox
EN 15528: Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure
EN 15531: Service Interface for Real Time Information
EN 15551: Railway applications — Railway rolling stock — Buffers
EN 15566: Railway applications — Railway rolling stock — Draw gear and screw coupling
EN 15595: Railway applications - Braking - Wheel slide protection
EN 15610: Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
EN 15611: Railway applications — Braking — Relay valves
EN 15612: Railway applications — Braking — Brake pipe accelerator valve
EN 15613: Knee and elbow protectors for indoor sports – Safety requirements and test methods
EN 15624: Railway applications — Braking — Empty-loaded changeover devices
EN 15625: Railway applications — Braking — Automatic variable load sensing devices
EN 15663: Railway applications — Definition of vehicle reference masses
EN 15714: Industrial Valves - Actuators
EN 15744: Film identification — Minimum set of metadata for cinematographic works
EN 15804: Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
EN 15806: Railway applications — Braking — Static brake testing
EN 15807: Railway applications — Pneumatic half couplings
EN 15827: Railway applications — Requirements for bogies and running gears
EN 15838: Customer Contact Centres - Requirements for service provision
EN 15839: Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces
EN 15877: Railway applications — Marking on railway vehicles
- Part 1: Freight wagons
- Part 2: External markings on coaches, motive power units, locomotives and on track machines
EN 15883: Washer-disinfectors
EN 15907: Film identification — Enhancing interoperability of metadata - Element sets and structures
EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
EN 16027: Protective clothing – Gloves with protective effect for association football goal keepers
EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
EN 16114: Management consultancy services
EN 16207: Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 16228: Drilling and foundation equipment – Safety
- EN 16228-1: Common requirements
- EN 16228-2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- EN 16228-3: Horizontal directional drilling equipment (HDD)
- EN 16228-4: Foundation equipment
- EN 16228-5: Diaphragm walling equipment
- EN 16228-6: Jetting, grouting and injection equipment
- EN 16228-7: Interchangeable auxiliary equipment
EN 16247: Energy audits
EN ISO 16321: Eye and face protection for occupational use
- EN ISO 16321-1: Part 1: General requirements (ISO 16321-1:2021)
- EN ISO 16321-2: Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
- EN ISO 16321-3: Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
EN 16350: Protective gloves – Electrostatic properties
EN 16404: Railway applications — Re-railing and recovery requirements for railway vehicles
EN 16473: Firefighters helmets – Helmets for technical rescue
EN 16716: Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods
EN 16725: Railway applications — Track — Restoration and repair of manganese crossings
EN 16729: Railway applications – Infrastructure – Non-destructive testing on rails in track
- EN 16729-1: Part 1: Requirements for ultrasonic inspection and evaluation principles
- EN 16729-2: Part 2: Eddy current testing of rails in track
- EN 16729-3: Part 3: Requirements for identifying internal and surface rail defects
- EN 16729-4: Part 4: Qualification of personnel for non-destructive testing on rails
- EN 16729-5: Part 5: Non-destructive testing on welds in track
EN 16804: Diving equipment — Diving open heel fins — Requirements and test methods
EN 16805: Diving equipment — Diving mask — Requirements and test methods
EN 16931-1: Electronic Invoicing - Semantic data model of the core elements of an electronic invoice
EN 17092: Protective garments for motorcycle riders
- EN 17092-2: Part 2: Class AAA garments – Requirements
- EN 17092-3: Part 3: Class AA garments – Requirements
- EN 17092-4: Part 4: Class A garments – Requirements
- EN 17092-5: Part 5: Class B garments – Requirements
- EN 17092-6: Part 6: Class C garments – Requirements
EN 17109: Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods
EN 17161: Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users
EN ISO 17249: Safety footwear with resistance to chain saw cutting (ISO 17249:2013)
EN 17282: Railway applications — Infrastructure —Under ballast mats
EN 17343: Railway applications — General terms and definitions
EN 17353: Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements
EN 17397: Railway applications — Rail defects
- EN 17397-1: Part 1: Rail defect management
EN 17495: Railway Applications — Acoustics — Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
EN 17520: Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods
EN 17682: Railway applications — Infrastructure — Resilient element for floating slab system
EN 17927: Security Evaluation Standard for IoT Platforms (SESIP)
EN ISO 18527: Eye and face protection for sports use
- EN ISO 18527-1: Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
- EN ISO 18527-2: Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)

EN 20000–49999

EN ISO 20320: Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020)
EN ISO 20345: Personal protective equipment – Safety footwear (ISO 20345:2021)
EN ISO 20346: Personal protective equipment – Protective footwear (ISO 20346:2021)
EN ISO 20347: Personal protective equipment – Occupational footwear (ISO 20347:2021)
EN ISO 20349: Personal protective equipment – Footwear protecting against risks in foundries and welding
- EN ISO 20349-1: Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
- EN ISO 20349-2: Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
EN ISO 20471: High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)
EN ISO 27065: Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)
EN 28601: Data elements and interchange formats; information interchange; representation of dates and times
EN 45011: General requirements for bodies operating product certification systems, replaced in 2012 by ISO/IEC 17065 Conformity assessment: Requirements for bodies certifying products, processes and services.
EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
EN 45545: Railway applications. Fire protection on railway vehicles.
- EN 45545-1: Railway applications. Fire protection on railway vehicles. General
- EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
- EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
- EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
- EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
- EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

EN 50000–59999 (CENELEC specific, non-IEC electrical standards)

EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
EN 50075: Europlug
EN 50090: Home and Building Electronic Systems (KNX/EIB)
EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
EN 50121: Railway applications - Electromagnetic compatibility
- EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
- EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
- EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
- EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
- EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
- EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
EN 50122: Railway applications - Fixed installations
- EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
- EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
- EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
EN 50123: Railway applications - Fixed installations - D.C. switchgear
EN 50124: Railway applications - Insulation coordination
EN 50125-1: Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
EN 50128: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
EN 50129: Railway applications - Communication, signalling and processing systems – Safety related electronic systems for signalling
EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
EN 50131: Alarm systems - Intrusion and hold-up systems
EN 50136: Alarm systems - Alarm transmission systems
EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
EN 50155: Railway applications - Electronic equipment used on rolling stock
EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
EN 50163: Railway applications - Supply voltages of traction systems
EN 50178: Electronic equipment for use in power installations
EN 50207: Railway applications - Electronic power converters for rolling stock
EN 50262: Metric cable glands
EN 50267: Corrosive Gases
EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
EN 50522: Earthing of power installations exceeding 1 kV a.c.
EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
EN 50321-1: Live working – Footwear for electrical protection – Insulating footwear and overboots
EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
EN 50365: Live Working – Electrically insulating helmets for use on low and medium voltage installations
EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz
EN 50436: Alcohol interlocks
EN 50465: Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 50470-3: Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C)
EN 50470-4: Electricity metering equipment - Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B and C)
EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.
EN 50571: Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
EN 50562: Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems
EN 50581: documentation for the assessment of electrical and electronic products with respect to the RoHS
EN 50600: Information technology - Data centre facilities and infrastructures
EN 50617-1: Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
EN 50617-2: Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 2: Axle counters
EN 50632: Electric motor-operated tools - Dust measurement Procedure
EN 50657: Railways Applications - Rolling stock applications - Software on Board Rolling Stock
EN 50716: Cross-functional Software Standard for Railways
EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus
EN 55022: Information technology equipment. Radio disturbance characteristics.
EN 55024: Information technology equipment. Immunity characteristics.
EN 55032: Electromagnetic Compatibility of Multimedia Equipment. Emission requirements.
EN 55035: Electromagnetic Compatibility of Multimedia Equipment. Immunity requirements.

EN 60000-69999 (CENELEC editions of IEC standards)

EN 60065: Audio, Video and similar electronics apparatus - Safety requirements.
EN 60077: Railway applications - Electric equipment for rolling stock
EN 60950-1: Information technology equipment - Safety - Part1: General requirements
EN 60950-21: Information technology equipment - Safety - Part21: Remote power feeding
EN 60950-22: Information technology equipment - Safety - Part22: Equipment installed outdoors
EN 60950-23: Information technology equipment - Safety - Part23: Large data storage equipment
EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems
EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports
EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods
EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication
EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
EN 61482-2: Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements
EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
EN 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment

Moreover, there are a lot of ISO and IEC standards that were accepted as "European Standard" (headlined as EN ISO xxxxx) and are valid in the European Economic Region.

References

↑ Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.
↑ Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 European Commission, Personal protective equipment, Regulation (EU) 2016/425, Summary list as xls file, accessed 12 July 2025
↑ BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020
↑ Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6
↑ "EN 12209 page".
↑ BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020
↑ "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.
↑ European Commission, Coronavirus: European standards for medical supplies made freely available to facilitate increase of production, accessed 12 July 2025
↑ Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022

External links

[Cook2002-1] Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.

[Koch2017-2] Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.

[EU2016/425-3] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 European Commission, Personal protective equipment, Regulation (EU) 2016/425, Summary list as xls file, accessed 12 July 2025

[4] BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020

[5] Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6

[6] "EN 12209 page".

[7] BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020

[8] "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.

[9] European Commission, Coronavirus: European standards for medical supplies made freely available to facilitate increase of production, accessed 12 July 2025

[10] Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022