General linear methods

General linear methods (GLMs) are a large class of numerical methods used to obtain numerical solutions to ordinary differential equations. They include multistage Runge–Kutta methods that use intermediate collocation points, as well as linear multistep methods that save a finite time history of the solution. John C. Butcher originally coined this term for these methods and has written a series of review papers, a book chapter, and a textbook on the topic. His collaborator, Zdzislaw Jackiewicz also has an extensive textbook on the topic. The original class of methods were originally proposed by Butcher (1965), Gear (1965) and Gragg and Stetter (1964).

Some definitions

Numerical methods for first-order ordinary differential equations approximate solutions to initial value problems of the form

${\displaystyle y'=f(t,y),\quad y(t_{0})=y_{0}.}$

The result is approximations for the value of ${\displaystyle y(t)}$ at discrete times ${\displaystyle t_{i}}$:

${\displaystyle y_{i}\approx y(t_{i})\quad {\text{where}}\quad t_{i}=t_{0}+ih,}$

where h is the time step (sometimes referred to as ${\displaystyle \Delta t}$).

A description of the method

We follow Butcher (2006), pp. 189–190 for our description, although we note that this method can be found elsewhere.

General linear methods make use of two integers: ${\displaystyle r}$ – the number of time points in history, and ${\displaystyle s}$ – the number of collocation points. In the case of ${\displaystyle r=1}$, these methods reduce to classical Runge–Kutta methods, and in the case of ${\displaystyle s=1}$, these methods reduce to linear multistep methods.

Stage values ${\displaystyle Y_{i}}$ and stage derivatives ${\displaystyle F_{i},\ i=1,2,\dots s}$ are computed from approximations ${\displaystyle y_{i}^{[n-1]},\ i=1,\dots ,r}$ at time step ${\displaystyle n}$:

${\displaystyle y^{[n-1]}=\left[{\begin{matrix}y_{1}^{[n-1]}\\y_{2}^{[n-1]}\\\vdots \\y_{r}^{[n-1]}\\\end{matrix}}\right],\quad y^{[n]}=\left[{\begin{matrix}y_{1}^{[n]}\\y_{2}^{[n]}\\\vdots \\y_{r}^{[n]}\\\end{matrix}}\right],\quad Y=\left[{\begin{matrix}Y_{1}\\Y_{2}\\\vdots \\Y_{s}\end{matrix}}\right],\quad F=\left[{\begin{matrix}F_{1}\\F_{2}\\\vdots \\F_{s}\end{matrix}}\right]=\left[{\begin{matrix}f(Y_{1})\\f(Y_{2})\\\vdots \\f(Y_{s})\end{matrix}}\right].}$

The stage values are defined by two matrices ${\displaystyle A=[a_{ij}]}$ and ${\displaystyle U=[u_{ij}]}$:

${\displaystyle Y_{i}=\sum _{j=1}^{s}a_{ij}hF_{j}+\sum _{j=1}^{r}u_{ij}y_{j}^{[n-1]},\qquad i=1,2,\dots ,s,}$

and the update to time ${\displaystyle t^{n}}$ is defined by two matrices ${\displaystyle B=[b_{ij}]}$ and ${\displaystyle V=[v_{ij}]}$:

${\displaystyle y_{i}^{[n]}=\sum _{j=1}^{s}b_{ij}hF_{j}+\sum _{j=1}^{r}v_{ij}y_{j}^{[n-1]},\qquad i=1,2,\dots ,r.}$

Given the four matrices ${\displaystyle A,U,B}$ and ${\displaystyle V}$, one can compactly write the analogue of a Butcher tableau as

${\displaystyle \left[{\begin{matrix}Y\\y^{[n]}\end{matrix}}\right]=\left[{\begin{matrix}A\otimes I&U\otimes I\\B\otimes I&V\otimes I\end{matrix}}\right]\left[{\begin{matrix}hF\\y^{[n-1]}\end{matrix}}\right],}$

where ${\displaystyle \otimes }$ stands for the Kronecker product.

Examples

We present an example described in (Butcher, 1996). This method consists of a single "predicted" step and "corrected" step, which uses extra information about the time history, as well as a single intermediate stage value.

An intermediate stage value is defined as something that looks like it came from a linear multistep method:

${\displaystyle y_{n-1/2}^{*}=y_{n-2}+h\left({\frac {9}{8}}f(y_{n-1})+{\frac {3}{8}}f(y_{n-2})\right).}$

An initial "predictor" ${\displaystyle y_{n}^{*}}$ uses the stage value ${\displaystyle y_{n-1/2}^{*}}$ together with two pieces of time history:

${\displaystyle y_{n}^{*}={\frac {28}{5}}y_{n-1}-{\frac {23}{5}}y_{n-2}+h\left({\frac {32}{15}}f(y_{n-1/2}^{*})-4f(y_{n-1})-{\frac {26}{15}}f(y_{n-2})\right),}$

and the final update is given by

${\displaystyle y_{n}={\frac {32}{31}}y_{n-1}-{\frac {1}{31}}y_{n-2}+h\left({\frac {5}{31}}f(y_{n}^{*})+{\frac {64}{93}}f(y_{n-1/2}^{*})+{\frac {4}{31}}f(y_{n-1})-{\frac {1}{93}}f(y_{n-2})\right).}$

The concise table representation for this method is given by

${\displaystyle \left[{\begin{array}{ccc|cccc}0&0&0&0&1&{\frac {9}{8}}&{\frac {3}{8}}\\{\frac {32}{15}}&0&0&{\frac {28}{5}}&-{\frac {23}{5}}&-4&-{\frac {26}{15}}\\{\frac {64}{93}}&{\frac {5}{31}}&0&{\frac {32}{31}}&-{\frac {1}{31}}&{\frac {4}{31}}&-{\frac {1}{93}}\\\hline {\frac {64}{93}}&{\frac {5}{31}}&0&{\frac {32}{31}}&-{\frac {1}{31}}&{\frac {4}{31}}&-{\frac {1}{93}}\\0&0&0&1&0&0&0\\0&0&1&0&0&0&0\\0&0&0&0&0&1&0\\\end{array}}\right].}$

See also

• Runge–Kutta methods
• Linear multistep methods
• Numerical methods for ordinary differential equations

Notes

References

• Butcher, John C. (January 1965). "A Modified Multistep Method for the Numerical Integration of Ordinary Differential Equations". Journal of the ACM. 12 (1): 124–135. doi:10.1145/321250.321261. S2CID 36463504.
• Gear, C. W. (1965). "Hybrid Methods for Initial Value Problems in Ordinary Differential Equations". Journal of the Society for Industrial and Applied Mathematics, Series B: Numerical Analysis. 2 (1): 69–86. Bibcode:1965SJNA....2...69G. doi:10.1137/0702006. hdl:2027/uiuo.ark:/13960/t4rj60q8s. S2CID 122744897.
• Gragg, William B.; Hans J. Stetter (April 1964). "Generalized Multistep Predictor-Corrector Methods". Journal of the ACM. 11 (2): 188–209. doi:10.1145/321217.321223. S2CID 17118462.
• Hairer, Ernst; Wanner, Wanner (1973), "Multistep-multistage-multiderivative methods for ordinary differential equations", Computing, 11 (3): 287–303, doi:10.1007/BF02252917, S2CID 25549771.

External links

• General Linear Methods