Mercury(II) sulfate

Mercury(II) sulfate
Mercury(II) sulfate
Mercury(II) sulfate
Names
Other names
  • Mercuric sulfate
  • Mercurypersulfate
  • Mercury Bisulfate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.029.083 Edit this at Wikidata
EC Number
  • 231-992-5
RTECS number
  • OX0500000
UNII
UN number UN1645
  • InChI=1S/Hg.H2O4S/c;1-5(2,3)4/h;(H2,1,2,3,4)/q+2;/p-2
    Key: DOBUSJIVSSJEDA-UHFFFAOYSA-L
  • [O-]S(=O)(=O)[O-].[Hg+2]
Properties
HgSO4
Molar mass 296.65 g·mol−1
Appearance white monoclinic crystals
Odor odorless
Density 6.47 g/cm3
450 °C (842 °F) (dec.)
Decomposes in water to yellow mercuric subsulfate and sulfuric acid.[citation needed]
Solubility soluble in hot sulfuric acid (H2SO4), NaCl solution
−78.1×10−6 cm3/mol
Structure (monohydrate)
orthorhombic
Pnma [No. 31]
a = 7.8796(9) Å, b = 5.4209(4) Å, c = 8.9704(7) Å
383.17 Å3
2
Octahedral at Hg.
Thermochemistry
−707.5 kJ⋅mol−1
Hazards
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS07: Exclamation markGHS08: Health hazardGHS09: Environmental hazard
Danger
H300+H310+H330, H314, H317, H341, H373, H410
P201, P202, P260, P262, P264, P270, P271, P272, P273, P280, P284, P301+P310+P330, P301+P330+P331, P303+P361+P353, P304+P340+P310, P305+P351+P338+P310, P308+P313, P333+P313, P361+P364, P391, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 4: Very short exposure could cause death or major residual injury. E.g. VX gasFlammability 0: Will not burn. E.g. waterInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
4
0
1
> 450 °C (842 °F; 723 K)
0.1 mg/m3 [skin] (TWA)
Lethal dose or concentration (LD, LC):
  • 25 mg/kg (oral, mouse)
  • 57 mg/kg (oral, rat)
  • 625 mg/kg (dermal, rat)
NIOSH (US health exposure limits):
PEL (Permissible)
0.1 mg/m3 (ceiling) [skin]
REL (Recommended)
0.1 mg/m3 (ceiling) [skin]
IDLH (Immediate danger)
10 mg/m3
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X markN verify (what is checkYX markN ?)

Mercury(II) sulfate, commonly called mercuric sulfate, is the chemical compound HgSO4. It is an odorless salt that forms white granules or crystalline powder. In water, it separates into an insoluble basic sulfate with a yellow color and sulfuric acid.[citation needed]

Structure

Portion of structure of HgSO4 illustrating the distorted tetrahedral geometry at Hg (dark blue spheres)

The anhydrous compound features Hg2+ in a highly distorted tetrahedral HgO4 environment. Two Hg−O distances are 2.22 Å and the others are 2.28 and 2.42 Å. In the monohydrate, Hg2+ adopts a linear coordination geometry with Hg−O (sulfate) and Hg−O (water) bond lengths of 2.179 and 2.228 Å respectively. Four weaker bonds are also observed with Hg−O distances >2.5 Å.

History

In 1932, the Japanese chemical company Chisso Corporation began using mercury sulfate as the catalyst for the production of acetaldehyde from acetylene and water. Though it was unknown at the time, methylmercury is formed as a side product of this reaction. Exposure and consumption of the mercury waste products, including methylmercury, that were dumped into Minamata Bay by Chisso are believed to be the cause of Minamata disease in Minamata, Japan.

Production

Mercury sulfate can be produced by treating mercury with hot concentrated sulfuric acid:

Hg + 2 H2SO4 → HgSO4 + SO2 + 2 H2O

Alternatively yellow mercuric oxide reacts also with concentrated sulfuric acid.

Uses

Denigés' reagent

An acidic solution of mercury sulfate is known as Denigés' reagent. It was commonly used throughout the 20th century as a qualitative analysis reagent. If Denigés' reagent is added to a solution containing compounds that have tertiary alcohols, a yellow or red precipitate will form.

Hydration reactions

Conversion of 2,5-dimethylhexyne-2,5-diol to 2,2,5,5-tetramethylte-trahydrofuran-3-one
Conversion of 2,5-dimethylhexyne-2,5-diol to 2,2,5,5-tetramethylte-trahydrofuran-3-one

Mercury sulfate, as well as other mercury(II) compounds, are commonly used as catalysts in oxymercuration-demercuration, a type of electrophilic addition reaction that results in hydration of an unsaturated compound. The hydration of an alkene gives an alcohol. The regioselectivity is that predicted by Markovnikov's rule. For an alkyne, the result is an enol, which tautomerizes to give the carbonyl. At one time, this chemistry was employed commercially for the preparation of acetaldehyde from acetylene:

C2H2 + H2O → CH3CHO

A related and specialized example is the conversion of 2,5-dimethylhexyne-2,5-diol to 2,2,5,5-tetramethyltetrahydrofuran using aqueous mercury sulfate without the addition of acid.

Health issues

HgSO4 causes burns by all exposure routes. Inhalation of HgSO4 can result in severe swelling and cessation of breathing. Exposure of the eyes to HgSO4 can cause ulceration of conjunctiva and cornea. If the skin is exposed to HgSO4 it may cause an allergic skin reaction. Ingestion of HgSO4 may cause perforation of the stomach or esophagus, necrosis, pain, vomiting, and severe vomiting. Ingestion can result in kidney damage or death. Symptoms from any exposure may be delayed.

It was used in the late 19th century to induce vomiting for medical reasons.