|
| |||
| Names | |||
|---|---|---|---|
| Preferred IUPAC name
Disulfur decafluoride | |||
| Systematic IUPAC name
Decafluoro-1𝜆6,2𝜆6-disulfane | |||
Other names
| |||
| Identifiers | |||
3D model (JSmol) |
|||
| ChemSpider | |||
| ECHA InfoCard | 100.024.732 | ||
| EC Number |
| ||
| MeSH | Disulfur+decafluoride | ||
PubChem CID |
|||
| RTECS number |
| ||
| UNII | |||
| UN number | 3287 | ||
CompTox Dashboard (EPA) |
|||
| |||
| |||
| Properties | |||
| S2F10 | |||
| Molar mass | 254.10 g·mol−1 | ||
| Appearance | colorless liquid | ||
| Odor | like sulfur dioxide | ||
| Density | 2.08 g/cm3 | ||
| Melting point | −53 °C (−63 °F; 220 K) | ||
| Boiling point | 30.17 °C (86.31 °F; 303.32 K) | ||
| insoluble | |||
| Vapor pressure | 561 mmHg (74.8 kPa) (20 °C (68 °F)) | ||
| Hazards | |||
| Occupational safety and health (OHS/OSH): | |||
Main hazards |
Poisonous | ||
| NFPA 704 (fire diamond) | |||
| Lethal dose or concentration (LD, LC): | |||
LC50 (median concentration) |
| ||
| NIOSH (US health exposure limits): | |||
PEL (Permissible) |
TWA 0.025 ppm (0.25 mg/m3) | ||
REL (Recommended) |
C 0.01 ppm (0.1 mg/m3) | ||
IDLH (Immediate danger) |
1 ppm | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |||
Disulfur decafluoride is a chemical compound with the formula S2F10. It was discovered in 1934 by Denbigh and Whytlaw-Gray. Each sulfur atom of the S2F10 molecule is octahedral, and surrounded by five fluorine atoms and one sulfur atom. The two sulfur atoms are connected by a single bond. In the S2F10 molecule, the oxidation state of each sulfur atoms is +5, but their valency is 6 (they are hexavalent).
It is a colorless liquid with a burnt match smell similar to sulfur dioxide.
Disulfur decafluoride is produced by photolysis of SF5Br, or SF5Cl in H2:
Disulfur decafluoride arises by the decomposition of sulfur hexafluoride. It is produced by the electrical decomposition of sulfur hexafluoride (SF6)—an essentially inert insulator used in high voltage systems such as transmission lines, substations and switchgear. S2F10 is also made during the production of SF6.
The S−S bond dissociation energy is 305±21 kJ/mol, about 80 kJ/mol stronger than the S−S bond in diphenyldisulfide.
At temperatures above 150 °C (302 °F), S2F10 decomposes slowly (disproportionation) into SF6 and sulfur tetrafluoride (SF4):[citation needed]
S2F10 reacts with tetrafluorohydrazine (N2F4) to give difluoroamino sulfur pentafluoride (SF5NF2):[citation needed]
In the presence of excess chlorine gas, S2F10 reacts to form sulfur chloride pentafluoride (SF5Cl):[citation needed]
The analogous reaction with bromine is reversible and yields SF5Br. The reversibility of this reaction can be used to synthesize S2F10 from SF5Br.
It reacts with SO2 to form pentafluorosulfur fluorosulfonate (SF5OSO2F) in the presence of ultraviolet radiation.[citation needed]
S2F10 was considered a potential chemical warfare pulmonary agent in World War II because it does not produce lacrimation or skin irritation, thus providing little warning of exposure. Disulfur decafluoride is a colorless gas or liquid with a sulfur dioxide (SO2)-like odor. Its toxicity is thought to be caused by its disproportionation in the lungs into SF6, which is inert, and SF4, which reacts with moisture to form sulfurous acid and hydrofluoric acid.