Lancia V6 engine

Lancia V6 engine
Overview
ManufacturerLancia
Production1950–1970
Layout
ConfigurationNaturally aspirated and supercharged 60° V6
Displacement
  • 1.8 L (1,754 cc; 107.0 cu in)
  • 2.0 L (1,991 cc; 121.5 cu in)
  • 2.3 L (2,266 cc; 138.3 cu in)
  • 2.5 L (2,451 cc; 149.6 cu in)
  • 2.5 L (2,458 cc; 150.0 cu in)
  • 2.7 L (2,693 cc; 164.3 cu in)
  • 2.8 L (2,775 cc; 169.3 cu in)
  • 3.0 L (2,962 cc; 180.8 cu in)
  • 3.1 L (3,102 cc; 189.3 cu in)
  • 3.3 L (3,284 cc; 200.4 cu in)
  • 3.8 L (3,750 cc; 228.8 cu in)
Cylinder bore
  • 70 mm (2.76 in)
  • 72 mm (2.83 in)
  • 75 mm (2.95 in)
  • 78 mm (3.07 in)
  • 80 mm (3.15 in)
  • 82 mm (3.23 in)
  • 85 mm (3.35 in)
  • 86 mm (3.39 in)
  • 88 mm (3.46 in)
  • 93 mm (3.66 in)
Piston stroke
  • 76 mm (2.99 in)
  • 81.5 mm (3.21 in)
  • 85 mm (3.35 in)
  • 85.5 mm (3.37 in)
  • 90 mm (3.54 in)
  • 92 mm (3.62 in)
Cylinder block materialLight alloy steel
Cylinder head materialAluminium alloy
ValvetrainOHV 2 valves x cyl.
Combustion
Fuel systemCarburetor
Fuel typePetrol
Cooling systemWater-cooled
Output
Power output56–305 PS (41–224 kW; 55–301 bhp)

In 1950, Lancia introduced the world's first production 60° V6 engine in the Lancia Aurelia.: 131 : 90  The engine was the work of Francesco De Virgilio and was developed to solve the vibration problems Lancia had experienced with its V4 engines. This was achieved by setting the vee angle to 60 degrees. It remained in production through 1970. Lancia used V6 engines in road, sports cars, and sports racing cars.

Aurelia

The first-generation Aurelia engines were produced from 1950 through 1967.

1800

The 1.8 L (1,754 cc; 107.0 cu in) 1800 was the first V6. Bore and stroke was 70 mm × 76 mm (2.76 in × 2.99 in). Maximum power is 56 PS (41 kW; 55 bhp) at 4,000 rpm, maximum torque 10.8 kg⋅m (106 N⋅m; 78 lb⋅ft) at 2,500-3,000 rpm.

2000

The engine was expanded to 2.0 L (1,991 cc; 121.5 cu in) for 1951's B21 Aurelia. Bore and stroke was 72 mm × 81.5 mm (2.83 in × 3.21 in).

2300

A 2.3 L (2,266 cc; 138.3 cu in) version was also produced.

2500

The largest of the original Aurelia engines was the 2.5 L (2,451 cc; 149.6 cu in) 2500 introduced in 1953. It was still undersquare at 78 mm × 85.5 mm (3.07 in × 3.37 in) bore and stroke.

Flaminia

The 2.8-litre tipo 826.100 engine in a Flaminia 3.C. GT

The engine's severe undersquare design was addressed for the 1957 Flaminia version. This lasted in production through 1970.

2500

The new engine, tipo 813 for the initial Berlinas and tipo 823 for other models, displaced 2.5 L (2,458 cc; 150.0 cu in) from a much less undersquare 80 mm × 81.5 mm (3.15 in × 3.21 in) bore and stroke.

2800

The final version was the 2.8 L (2,774 cc; 169.3 cu in) tipo 826 engine. Bore was now 85 mm (3.35 in) and stroke remained at 81.5 mm (3.21 in) as in the 2500.

Application in motorsports

The Lancia D20 (7 produced) had a 60 degree quad cam V6 2962 cc 217 bhp (162 kW; 220 PS) engine and the D24 (6 produced) a 3300 cc V6 engine. For the 1953 edition of the 24 Hours of Le Mans, the 3-litre D20 was reduced to a 2.7-liter displacement, but with compressor and 240 bhp (179 kW; 243 PS).: 266  The largest version, with 3750 cc in the D25 Spider Competizione, produced 295–305 bhp (220–227 kW; 299–309 PS).: 403 : 274 

Later V6-engined Lancias

Later Lancias were powered by V6 engines designed by other manufacturers, with