Magnesium silicide

Magnesium silicide
Names
Preferred IUPAC name
Magnesium silicide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.041.125 Edit this at Wikidata
EC Number
  • 245-254-5
UNII
UN number 2624
  • InChI=1S/2Mg.Si checkY
    Key: YTHCQFKNFVSQBC-UHFFFAOYSA-N checkY
  • InChI=1/2Mg.Si/rMg2Si/c1-3-2
    Key: YTHCQFKNFVSQBC-GEBTXNJDAA
  • [Mg]=[Si]=[Mg]
Properties
Mg2Si
Molar mass 76.695 g·mol−1
Appearance Gray cubic crystals
Density 1.99 g cm−3
Melting point 1,102 °C (2,016 °F; 1,375 K)
reacts
Structure
Antifluorite (cubic), cF12
Fm3m, #225
a = 0.6351 nm
4
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
reacts with water to produce pyrophoric silane
GHS labelling:
GHS02: Flammable
Warning
H261
P231+P232, P280, P370+P378, P402+P404, P501
Related compounds
Other cations
Calcium silicide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkYX markN ?)

Magnesium silicide, Mg2Si, is an inorganic compound of magnesium and silicon. As-grown Mg2Si usually forms black crystals; they are semiconductors with n-type conductivity and have potential applications in thermoelectric generators.

Crystal structure

Mg2Si crystallizes in the antifluorite structure. In the face-centered cubic lattice, Si centers occupy the corners and face-centered positions of the unit cell, and Mg centers occupy eight tetrahedral sites in the interior of the unit cell. The coordination numbers of Si and Mg are eight and four, respectively.

Synthesis

The reaction of powdered sand with magnesium powder.

It can be produced by heating silicon dioxide, SiO2, found in sand, with excess magnesium. The process first forms elemental silicon and magnesium oxide:

2 Mg + SiO2 → 2 MgO + Si

If an excess of Mg is present, Mg2Si is formed from the reaction of the remaining magnesium with the elemental silicon:

2 Mg + Si → Mg2Si
If there is an excess of SiO2, then elemental silicon remains.

These reactions proceed exothermically, even explosively.

Reactions

The reaction of magnesium silicide with 10% hydrochloric acid.

Magnesium silicide can be viewed as consisting of Si4− ions. As such, it is reactive toward acids. Thus, when magnesium silicide is treated with hydrochloric acid, silane (SiH4) and magnesium chloride are produced:

Mg2Si + 4 HCl → SiH4 + 2 MgCl2

Sulfuric acid can be used as well. These protonolysis reactions are typical of a group 2 (alkaline earth metal) and group 1 (alkali metal) silicides. The early development of silicon hydrides relied on this reaction.

Uses

Magnesium silicide is used to create aluminium alloys of the 6000 series, containing up to approximately 1.5% Mg2Si. An alloy of this group can be age-hardened to form Guinier-Preston zones and a very fine precipitate, resulting in increased alloy strength.

Magnesium silicide is a narrow-gap semiconductor. Its as-grown crystal exhibits n-type conductivity, but it can be changed to p-type by doping with Ag, Ga, Sn and possibly Li (at high doping levels). The major potential electronic application of Mg2Si is in thermoelectric generators.