In combustion engineering and explosion studies, the Markstein number or Michelson–Markstein number (named after Vladimir Alexandrovich Michelson and George H. Markstein, who proposed the concept in 1889 and 1951, respectively) characterizes the effect of local heat release of a propagating flame on variations in the surface topology along the flame, associated with local flame front curvature and flow straining of the flame. There are two dimensionless Markstein numbers: one is the curvature Markstein number and the other is the tangential flow-strain Markstein number. They are defined as:
where is the curvature Markstein length (curvature seen by a local observer moving with the flame), is the tangential flow-strain Markstein length and is the characteristic laminar flame thickness. For real flames, , although asymptotic studies based on a one-step chemistry model predict it to be otherwise.
If is the burning speed of a unstrained, planar premixed flame with respect to the unburnt gas, then the local burning speed of a strained or curved (or a combination of both) premixed flame is given by
where is the local unit normal (pointing to the burnt gas) of the flame front, is the local flow velocity evaluated on the unburnt-side of the flame front; is the surface divergence of the tangential velocity ; with flow being incompressible outside the flame, .
The two canonical configurations pertaining to the two Markstein numbers are as follows. In a spherically symmetric flame (with purely radial flow), we have and as a result
On the other hand, for a flat flame but subject to tangential straining (say, flames in a stagnation point flow), is constant and as a result
In some experimental configurations, the burning rate is measured with respect to the burnt gas. Then, one defines
where is the flow velocity measured on the burnt-gas side of the flame front. There exists a definite relation between the burnt-gas Markstein numbers and the unburnt-gas Markstein numbers .
The Markstein number with respect to the unburnt gas mixture was derived by Paul Clavin and Forman A. Williams in 1982, using activation energy asymptotics and one-step chemistry model. The formula was extended to include temperature dependences on the thermal conductivities by Paul Clavin and Pedro Luis Garcia Ybarra in 1983. The Clavin–Williams formula is given by
where
Here
| is the ratio of non-dimensional temperature | |
| is the density scaled by its unburnt gas value; | |
| is the ratio of density-thermal diffusivity product to its value in the unburnt gas; | |
| is the Zeldovich number; | |
| is the effective Lewis number of the deficient reactant (either fuel or oxidizer or a combination of both); |
In typical cases, one have
where and is the heat release parameter; the unburnt-to-burnt gas density ratio is given by . Then, we have
Paul Clavin and Jose C. Graña-Otero showed that for the two-step Zeldovich–Liñán–Dold model. The Markstein-number formulas, accounting for heat losses and transient pressure variations, were derived by D. Keller and Norbert Peters.
The Markstein-number formulas under Darcy's law were derived by P. Rajamanickam and J. Daou. When a flame propagates through strongly confined environments—such as narrow Hele-Shaw cells or permeable porous media—the flow is governed by Darcy's law. Under Darcy's law, a major qualitative departure from classical flame theory occurs: the curvature Markstein number and the tangential flow-strain Markstein number are fundamentally unequal () even for the one-step chemistry model. This inequality arises because Darcy's law permits leading-order tangential velocity discontinuities across the flame front due to fluid viscosity variations. Furthermore, a third parameter, the gravity-strain Markstein number , uniquely emerges under this formulation. The three Darcy-law Markstein numbers are given by
where
Here, is the viscosity (or more precisely viscosity/permeability) scaled by its unburnt gas value. The local burning speed of a strained or curved (or a combination of both) premixed flame is now given by
where is the medium permeability, is the kinetic viscosity of the unburnt gas and is the gravity vector.