The MC14500 Industrial Control Unit (ICU) is a CMOSone-bitmicroprocessor designed by Motorola for simple control applications in 1977. It was packaged in a 16-pin DIP and normally ran at 1MHz with 5V and only 5μA. If higher performance was needed, it could run as fast as 4MHz by increasing the voltage to 15V. It was inexpensive for the era, available at launch for $7.58 in 100-unit lots.
Overview
MC14500B (ICU) is well-suited to the implementation of ladder logic, and thus could be used to replace relay systems and programmable logic controllers, also intended for serial data manipulation. The processor supports 16 commands, operating at a frequency of 1MHz. The MC14500B unit does not include a program counter (PC); instead, a clock signal drives a separate PC chip; therefore the size of supported memory is dependent on the implementation of that chip. It was still in production in 1995.
The MC14500B was implemented with a transistor count of roughly 500 transistors. The chip was so simple not only because it only handled 1-bit computing data at a time, but also because the chip did not include a program counter, subroutine stack, etc. -- those required external chips.
Developers
The ICU was conceived by Vern Gregory in the mid-1970s while working as an engineer in a marketing / applications group of Motorola Semiconductor Products Sector in Phoenix, Arizona, USA; Brian Dellande originated circuit and subroutine designs, and co-wrote the manual; Ray DiSilvestro was the bench technician; Terry Malarkey provided management support.[citation needed]
In the CMOS Logic Division in Austin, Texas, USA (where it was made) Phil Smith was the chip designer; Mike Hadley provided product applications support.[citation needed]
Derivatives
A form of the design served as an embedded controller in a custom automotive chip made for Nippon Denso by Motorola—Japan.
I.P.R.S. Băneasa manufactured a clone of the MC14500B with the designation βP14500 in IIL technology (rather than the original CMOS).
Notable uses
One of the computers known to be based on this processor is the educational WDR 1-bit computer (512 bits of RAM, LED, I/O, keyboard).
A modern take, in retro style, of a computer based on this processor is the PLC14500-Nano. It is certified as Open Source Hardware PL000011 so anyone can learn from its design and can freely build it.
↑Ludwig, Volker; Paschenda, Klaus; Schepers, Heinz; Terglane, Hermann-Josef; Grannemann, Klaus; John, Burkhard; Komar, Hermann; Meinersen, Ludwig (1986). Written at Neuss & Recklinghausen, Germany. Fast alles über den WDR-1-Bit-Computer(PDF) (in German). Neuss, Germany: DATANorf. Archived(PDF) from the original on 2017-05-20. Retrieved 2017-05-20.
Further reading
Gregory, Vernon "Vern" C. (1979-05-08) [1977-01-24]. "Industrial control processor"(PDF). Motorola, Inc. US patent 4153942A. Archived(PDF) from the original on 2022-06-17. Retrieved 2022-06-17. (also: US 05/761,738; DE2801853A1)
Ludwig, Volker; Paschenda, Klaus, Remmelmann, Alexander (ed.), Bit und Byte - Wir bauen einen Computer[Bit and Byte - We build a computer] (TV series (6 parts)) (in German), WDR-Schulfernsehen
Schembri, Thierry; Bizoirre, Sylvain; Boisseau, Olivier; Chauvaud, Pierre-Emmanuel. "WDR-1-Bit Computer". OLD-COMPUTERS.COM. Archived from the original on 2017-05-20. Retrieved 2017-05-20.