| Computing desk | ||
|---|---|---|
| < January 8 | << Dec | January | Feb >> | January 10 > |
| Welcome to the Wikipedia Computing Reference Desk Archives |
|---|
| The page you are currently viewing is an archive page. While you can leave answers for any questions shown below, please ask new questions on one of the current reference desk pages. |
Can I connect two cable modems to the cable outlet in different rooms of my house? I have a single Time Warner cable internet account and I can't get a straight answer from their stupid call center people.
SteveBaker (talk) 03:48, 9 January 2016 (UTC)
If you have two accounts (or if Time Warner allowed it on a single account), it seems to me this would work and these sources seem to agree although they don't refer to Time Warner in particular . The fact that both modems will be sending and receiving data would seem to be irrelevant, since that's how Cable Internet access works. It's a shared connection. Multiple people are connected to the same cable (on the last mile). The fact that the cable outlets happen to be in the same house would likely be irrelevant.
For the upstream, the cable modems in collobration with the Cable modem termination system are already sharing the upstream somehow, probably via Time division multiple access according to some standard, probably some variant of DOCSIS. See for example. (This is happening with the downstream too, but it's easier for people to understand since the CMTS is the one sending all the data.)
We aren't talking about DSL or anything using phone lines where the last mile is unshared, so normally only one device is capable of using it at one time. (Well unless you count the DSL and voice components seperately where one device uses the higher frequencies and one device uses the lower ones.) Passive optical network is somewhat similar to cable albeit with fewer people sharing the same last mile.
The only reason I can think of why using two cable modems wouldn't work if the operator allowed it, would be if they'd already reached the limit of devices on that line. Or if there was some filtering from where the cable is split off from the main line before entering your house. (I don't know that much about how splitting the cable before entry in to a premise is done.)
I guess there is a slight possibility that the portion of cable in your house including any splitters is too poor to handle multiple devices, but it seems unlikely for only 2. And I'm not sure if this is really possible or it'll normally mean it won't work with even one. And perhaps if the input for the second modem is actually coming from the first modem, the first modem has some internal filtering. (If the cable is simply split with typical coaxial splitters, then this doesn't apply.)
What does
x = (t>c) ? t-c : t;
mean in C? (I don't know what the question mark and colon do). Bubba73 You talkin' to me? 04:24, 9 January 2016 (UTC)
Thanks
Bubba73 You talkin' to me? 05:32, 9 January 2016 (UTC)
Hi, I want to translate some code from AT&T to MIPS, and I encountered the directive ".long". What does this mean? What is its equivalent in MIPS? 213.8.204.41 (talk) 16:17, 9 January 2016 (UTC)
On Windows, what is the best way to ensure the data integrity of 200GB of assorted files and prevent data corruption? Simply duplicating the files does not protect from data corruption unfortunately.
Thank you
62.37.237.16 (talk) 16:39, 9 January 2016 (UTC)
You can add hashes or some other form of error detection to try and detect corruption. Many backuping tools may do this automatically, and some file systems have this built in. However this doesn't stop corruption, it simply allows you detect it after the fact. You can add a level of error correction to try and recover from when corruption occurs. To some extent a number of forms of RAID have this as do file systems like ReFS and ZFS. But such integrity checking and monitoring will only provide a baseline of protection, it's not going to help of corruption happens in a major way for some reason. You're far better having regular backups than just having such protection. Combining them both may be a good idea if it's really matters although in such a case you may also be better off seeking help outside the RD.
It also depends on what sort of corruption you're referring to. If it's intentional, it's very difficult to prevent, since any form of integrity or error detection you build in could likely be counteracted by whatever is corrupting your data. That's again where backups are an advantage since if it done right, it's far more difficult for the adversary to affect all your backups.
I just got an old IBM clone PC, not sure quite how old, but it's running Windows XP. It has a nice graphics card I would like to salvage (two standard 15 pin female (socket) D-sub connectors with high resolution), but that would mean I could no longer use that old PC, because it's only display port on the motherboard is a male DE-9 connector (plug), see the top pic at D-sub. Any idea if this old display port would work with a modern monitor that expects a 15-pin VGA connector or better ? What resolution could I expect if I could find a cable to do the conversion ? (My other option is to find a low res graphics card and put that in this old PC.) StuRat (talk) 19:56, 9 January 2016 (UTC)
Out D-sub article says: "A female 9-pin connector on an IBM compatible personal computer may be a video display output such as MDA, Hercules, CGA, or EGA (rarely VGA or others). Even though these all use the same DE9 connector, the displays cannot all be interchanged and monitors or video interfaces may even be damaged if connected to an incompatible device using the same connector." So, this sort of scares me off, but mine has a male connector. Any difference there ? StuRat (talk) 19:59, 9 January 2016 (UTC)
The old Windows XP PC has a Radeon 7000/Radeon VE graphics card, with dual monitor displays up to 2048×1536 each. It has a Celeron with a motherboard driver date of 7/1/2001.
I have two Windows 7 PCs I might like to put that graphics card into:
So, will that graphics card work in the newer PCs ? Any more info I need to get ? StuRat (talk) 01:48, 10 January 2016 (UTC)
Edit: Realised the Intel page for G460 does mention dual display support . I looked a bit more and I think a Sandy Bridge computer (with iGPU) should support an ADD2 (Serial Digital Video Out) card. Looking a bit on eBay, comparing what GPU you will get for the $8 inc shipping it costs for an ADD2 card it's complicated which one will be better. So perhaps an ADD2 is slightly worth considering. (I'm now more sure it won't work on the Radeon Xpress 1100, and confirmed my believe it would be a silly choice anyway.) That said, you will want to check compatibility, my impression is that ADD2 cards are fairly generic but I'm not sure if this extends to the iGPU era. Of course if you just want dual monitor VGA 1920x1200 and really don't care about anything else it probably doesn't matter since any GPU from the past 8 years or so should be fine. (Not that I really understand why you want dual monitor VGA 1920x1200/1080 but I digress.)
I have 51 Ntuser.dat{______________}.??? and one ntuser.ini, do I need them? They tend to be growing as files since the last time I checked this folder i.e. C:\User\... Can I delete them all? -- Mr. Zoot Cig Bunner (talk) 20:14, 9 January 2016 (UTC)
Can someone give a basic, primal, general explanation for what are "Data serialization languages"? What are they actually? Are they structure languages? What they use for etc? Someone would maybe want to write a short article about this ? Data serialization languages. Ben-Yeudith (talk) 21:50, 9 January 2016 (UTC)