The Hunter 27 series are all small recreational keelboats, built predominantly of fiberglass.
Variants
Hunter 27
Hunter 27
This model was designed by John Cherubini, introduced in 1974 and produced until 1984, with 2,000 examples completed. It has a masthead sloop rig, a length overall of 27.17ft (8.3m), a waterline length of 22.00ft (6.7m), displaces 7,000lb (3,175kg) and carries 3,000lb (1,361kg) of ballast. The boat has a draft of 4.25ft (1.30m) with the standard keel and 3.25ft (0.99m) with an optional shoal draft keel or a wing keel. The boat is fitted with a French Renaultdiesel engine of 8hp (6kW), although a Japanese Yanmar diesel was later an option. The fuel tank holds 12 U.S. gallons (45L; 10.0impgal) and the fresh water tank has a capacity of 35 U.S. gallons (130L; 29impgal). The full keel model has a PHRF racing average handicap of 189 with a high of 189 and low of 192. The shoal draft model has a PHRF racing average handicap of 225 with a high of 237 and low of 220. It has a hull speed of 6.29kn (11.65km/h). A tall mast version was also built, with a mast about 3.0ft (0.9m) higher. The tall mast model has a PHRF racing average handicap of 213 with a high of 222 and low of 208. With the tall mast and the shoal draft keel, the boat has a PHRF racing average handicap of 222 with a high of 219 and low of 226.
This model was designed by the Hunter Design Team and introduced in 1989 and produced until 1994. It has a fractional rig, a length overall of 26.58ft (8.1m), a waterline length of 22.42ft (6.8m), displaces 5,000lb (2,268kg) and carries 2,000lb (907kg) of ballast. The boat has a draft of 3.50ft (1.07m) with the standard keel fitted. The boat is fitted with a Japanese Yanmar 1GM-10 diesel engine or an outboard motor. The boat has a PHRF racing average handicap of 192 with a high of 186 and low of 201. It has a hull speed of 6.34kn (11.74km/h).
This new model was designed by Glenn Henderson and introduced in 2006. It has a B&R rig, a length overall of 27.33ft (8.3m), a waterline length of 23.56ft (7.2m), displaces 7,663lb (3,476kg) and carries 3,400lb (1,542kg) of lead ballast. The boat has a draft of 5.00ft (1.52m) with the deep keel and 3.44ft (1.05m) with the optional shoal draft bulb keel. A twin bilge keel model was also sold in the UK. The boat is fitted with a Japanese Yanmar diesel engine of 10hp (7kW). The fuel tank holds 15 U.S. gallons (57L; 12impgal) and the fresh water tank has a capacity of 20 U.S. gallons (76L; 17impgal). The boat has a hull speed of 6.5kn (12.04km/h).
This model is a high-performance racing version of the Hunter 27-3, that was also designed by Glenn Henderson and introduced in 2006. It has a fractional sloop rig, a length overall of 27.33ft (8.3m), a waterline length of 23.56ft (7.2m), displaces 8,000lb (3,629kg) and carries 2,500lb (1,134kg) of ballast. The boat has a draft of 5.52ft (1.68m) with the standard keel fitted. The boat is fitted with a Japanese Yanmar diesel engine of 14hp (10kW). The fuel tank holds 15 U.S. gallons (57L; 12impgal) and the fresh water tank has a capacity of 20 U.S. gallons (76L; 17impgal). The boat has a hull speed of 6.5kn (12.04km/h).
This model was a completely new design by the Hunter Design Team and introduced in 2006, as a trailerable sail and power hybrid boat, with a centerboard and 1,598lb (725kg) of flooding water ballast for sailing. It has a fractional sloop rig, a length overall of 26.35ft (8.0m), a waterline length of 24.18ft (7.4m), displaces 3,450lb (1,565kg) (5,048lb (2,290kg) with water ballast). The boat has a draft of 4.92ft (1.50m) with the centerboard extended and 1.57ft (0.48m) with it retracted, allowing beaching or ground transportation on a trailer. The boat can be fitted with outboard motors of up to 75hp (56kW) and can achieve a speed of 20kn (37.04km/h) under power with no water ballast. The fuel tank holds 6 U.S. gallons (23L; 5.0impgal) and the fresh water tank has a capacity of 10 U.S. gallons (38L; 8.3impgal). The boat has a hull speed of 6.59kn (12.20km/h) in displacement mode.