MRTC 3000 class

MRTC 3000 class
A three-car Tatra RT8D5M train at the Ortigas Interchange
A four-car Tatra RT8D5M train at Quezon Avenue station
Train interior in August 2025
Stock typeLight rail vehicle
In service1999–present
ManufacturerČKD Tatra
DesignerPatrik Kotas [cs]
AssemblyPrague, Czech Republic
Constructed1994–1995 (prototype)
1997–1999
Entered serviceDecember 15, 1999; 26 years ago (1999-12-15)
Refurbished
  • 2008–2009
  • 2016–2017, 2019–2023
Number built74 vehicles (1 prototype, 73 regular)
Number in service72 vehicles
Number scrapped1 (prototype)
Formation3/4 cars per trainset
Design codeRT8D5M
Fleet numbers3001–3073
Capacity394 per car (74 seats)
1,182–1,576 per train
OperatorDepartment of Transportation
DepotNorth Avenue
Line served Line 3
Specifications
Car body constructionLow alloy high tensile steel (body shell)
Aluminum sheets (ceiling)
Train length95.16 m (312 ft 2+29⁄64 in) (3 cars)
126.88 m (416 ft 3+9⁄32 in) (4 cars)
Car length31.72 m (104 ft 13⁄16 in)
Width2.5 m (8 ft 2+27⁄64 in)
Height3.73 m (12 ft 2+27⁄32 in)
Floor height0.925 m (3 ft 27⁄64 in)
Platform height0.9 m (2 ft 11+7⁄16 in)
DoorsDouble-leaf plug-type; 5 per side
  • Width: 861–1,255 mm (34–49 in)
  • Height: 1,900 mm (75 in)
Articulated sections3
Wheel diameter700–595 mm (28–23 in) (new–worn)
Wheelbase1.9 m (6 ft 2+51⁄64 in)
Maximum speed65 km/h (40 mph) (design)
60 km/h (37 mph) (service)
Weight46.8 t (103,000 lb) (tare)
70.4 t (155,000 lb) (laden)
Axle load8.8 t (19,000 lb)
Steep gradient70‰
Traction systemČKD Trakce TV14Z IGBT chopper
Traction motors8 × ČKD Trakce TE026A01-4 64.5 kW (86.5 hp) DC series-wound
(1 hour rating: 375 V 190 A 1946 rpm)
Power output
  • 516 kW (692 hp) per car
  • 1.55 MW (2,080 hp) (3 cars)
  • 2.06 MW (2,760 hp) (4 cars)
TransmissionCardan drive
Gear ratio7.42:1
Acceleration1.03 m/s2 (3.4 ft/s2)
Deceleration1.01 m/s2 (3.3 ft/s2) (service)
1.58 m/s2 (5.2 ft/s2) (emergency)
Auxiliaries3 × 480 V AC 60 Hz static converter
2 × 24 V DC batteries
HVACThermo King roof-mounted air-conditioning
Electric systems750 V DC overhead catenary
Current collectionFaiveley single-arm pantograph
UIC classificationBo′+Bo′+Bo′+Bo′
BogiesInside-frame type
Minimum turning radius20 m (66 ft)
Braking systemsRegenerative and rheostatic with discs and track brakes
Safety systemsAlstom CITYFLO 250 fixed block with subsystems of EBICAB 900 ATP, EBI Screen 900 CTC, and EBI Lock 950 CBI
Coupling systemScharfenberg Type 330
Headlight typeLED lamp
SeatingLongitudinal
Track gauge1,435 mm (4 ft 8+1⁄2 in) standard gauge
Notes/references
Sourced from unless otherwise noted.

The MRTC 3000 class, also known as the Tatra RT8D5M, is the class of first-generation high-floor uni-directional light rail vehicles in use on the Manila MRT Line 3 and built by Czech tram manufacturer ČKD Tatra. The LRVs are owned and operated by the Department of Transportation (DOTr).

Until 2025, the RT8D5M LRVs were owned by the Metro Rail Transit Corporation (MRTC) pursuant to its build-lease-transfer contract with the DOTr. These were also the last vehicles made by ČKD Tatra before it was taken over by Siemens.

History

Purchase and production

Construction of the MRT Line 3 began in 1996 when the then-Department of Transportation and Communications (DOTC; later the Department of Transportation) entered into a build-lease-transfer agreement with the Metro Rail Transit Corporation (MRTC). MRTC signed a contract with ČKD Tatra in 1997 to supply the trains.

73 light rail cars were produced by ČKD in two batches; 49 were produced in 1998 and the other 24 were completed the following year. The first train was flown into Manila via plane while the remaining trains were transported by sea. The fleet also happened to be the last produced by ČKD before it was taken over by Siemens.

Prototype RT8D5 0029

In late-March 1995, the first three-section tram was tested in Prague under the number 0029 as a prototype. It was a development of the Tatra KT8D5; 0029 retained its control, proportions, the front and rear sections, and unlike the later production vehicles, designed for bidirectional operation.

Prototype 0029 soon remained in Prague. On November 3, 1998, under orders of MRT-3's future operator, 0029 was used together with the Tatra T5A5 prototype, tram no. 0013, and T3 no. 6663 for crash tests in the main workshop in Hostivař. The tests were proven to be successful as 0029 was not significantly damaged. It then stood at the workshop for several years before being eventually scrapped.

Refurbishments and upgrades

All 73 light rail vehicles (LRV) were first refurbished from 2008 to 2009 by Sumitomo Corporation, its technical partner Mitsubishi Heavy Industries Engineering (MHIENG), and its subsidiary TES Philippines Inc. (TESP). The aging air-conditioning units of the trains since 1999 were replaced with new ones. The interior and exterior of the trains were also refurbished.

Train cars of the 3000 class with a BURI-refurbished light rail vehicle on the left (December 2021)

In 2016, Busan Universal Rail, Inc. (BURI) initiated the second overhaul of the trains. Forty-three light rail vehicles were to be overhauled as part of its three-year maintenance contract with the Department of Transportation and Communications (DOTC; later the Department of Transportation [DOTr]). The refurbished cars underwent a body repaint and installation of new air-conditioning units from Thermo King. However, DOTr terminated its contract with BURI on November 6, 2017, with only three vehicles refurbished.

A 3000 class train car after its second refurbishment by Sumitomo (November 2021)

On May 1, 2019, Sumitomo returned as maintenance provider and continued the second refurbishment of the trains. The contractual scope was expanded to cover all 72 LRVs. It consists of the installation of new choppers, traction motors, wheels, pantographs, new air conditioning units from Thermo King; the repainting of the train's exteriors and interiors; and the fitting of new lighting installations throughout the trains. SKD TRADE, a.s., the successor company to ČKD Tatra, also supplied new tachographs, axles, and bogies, as well as spare parts for the interior, pantographs, couplers, and resistors.

The first overhauled train was deployed in mid-2019. On October 29, 2020, a newly overhauled train underwent a test run at a speed of 50 km/h (31 mph); it was put to service on November 5. Refurbishment was completed on February 2, 2023, three months ahead of schedule.

Four-car operations

A four-car RT8D5M train at the turnback siding of North Avenue station

Plans for four-car operations were first laid in 2016, adding an additional car from the current three. Although MRT-3's 130-meter (430 ft) stations are designed for four-car trains, the pocket track near Taft Avenue station was too short for safe four-car operations.

After the completion of the line's rehabilitation in late 2021, the DOTr tested a four-car 3000 class trainset on the mainline on March 9, 2022. The first two four-car trainsets were deployed on March 28, while a third trainset was rolled out on April 18. Although full conversion was initially planned to be achieved by 2023, all trains soon reverted to the existing 3-car configuration.

In February 2025, the DOTr planned to redeploy four-car trainsets once the construction of the extended Taft Avenue pocket track would be completed in June. In the aftermath of the line's annual maintenance shutdown during Holy Week, four-car operations returned on April 21 (Easter Monday), two months ahead of schedule, with an initial three sets deployed during the weekday peak hours.

On October 17, 2025, the DOTr increased the number of four-car trainsets to six to further reduce passenger congestion at stations. On October 18, it extended its deployment to weekends.

Design

The RT8D5M was a development of the Tatra KT8D5; its doors and electrical systems were largely based on the newer KT8D5N (pictured above).

The LRV design is a one-way eight-axle motorized car consisting of three articulated cars, which are connected to each other by the joint and the cover. The RT8D5M operates as built on the high-speed city rail system with high platforms and in tropical conditions.

Car body

The car body is made of low-alloy high-tensile steel, while the ceiling is made of aluminum sheets.

Unlike the prototype 0029, these cars have rounded "foreheads" or beveled large windows at both ends.

The trains wear a livery consisting of royal blue, red, and white. Under the "Metrostar Express" branding, the white portion contains the brand logo and lettering on the sides. However, since 2012, the branding has since been unused. The trains also usually wore wrap ads—unlike the LRTA 1200 class which wear ads as a whole trainset, the 3000 class are seen to wear wrap ads per car.

Each light rail vehicle has three roof-mounted air-conditioning units manufactured by Thermo King. In total, there are nine air-conditioning units in a three-car train set.

Interior

Each train car has a capacity of 74 seated and 320 standing passengers. Under crush loading conditions, each car can carry 394 commuters. A 3-car trainset can carry 1,182 passengers. Each train car consists of longitudinal bench seating and a PWD open space for wheelchairs and strollers located at one end of each car.

Each car has five double leaf, electronically operated, plug-sliding doors. The three center doors have an open width of 1,255 mm (4 ft 1.4 in) while the two end doors at 861 mm (2 ft 9.9 in). The doors have a height of 1,900 mm (6 ft 3 in).

The Passenger Assist Railway Display System (PARDS), a passenger information system powered by LCD screens installed near the ceiling of the train that shows news, advertisements, current train location, arrivals and station layouts, were installed inside the trains from 2019 to 2020.

Mechanical

Each LRV has inside-frame bogies, consisting of four motorized bogies. The primary suspension is a steel spring and the secondary suspension is a wound-up steel spring. Scharfenberg couplers are present in the ends of the light rail vehicles.

Electrical

The electrical and traction systems of the RT8D5M trains are supplied by ČKD Trakce. The propulsion is controlled by choppers with IGBT thyristors. The traction motors consist of eight DC series-wound/wave armature winding self ventilated motors. The IEC 349-compliant traction motors have a Class H insulation class for the rotor and a Class F insulation class for the stator. Each motor has a power output of 64.5 kilowatts (86.5 horsepower), and are rated for 375 volts, a current of 190 amps, and a speed of 1946 revolutions per minute (rpm) with a maximum speed of 4350 rpm.

Auxiliary power is sourced from 480-volt AC static converters and two 24-volt DC batteries.

Signaling and safety equipment

The trains are equipped with the EBICAB 900 Automatic Train Protection (ATP) system. Some onboard signaling equipment consist of vehicle logic units (VLUs), driver panels, and antennas. The original VLUs were manufactured by Bombardier Transportation (acquired by Alstom in 2021). The VLUs are the primary automatic safety devices for the trains.

In 2017, it was revealed that the original VLUs were stolen and replaced with unauthorized parts. An audit report by Bombardier Transportation showed that 99% of the trains were using fake parts. According to the inventory conducted in all cars, the other cars were equipped with ABB, ABB Daimler-Benz or DaimlerChrysler-branded VLUs.

The EBICAB 900 ATP system is integrated with the Alstom CITYFLO 250 signaling solution.

Train formation

A scale model drawing of the MRTC 3000 class in a 3-car formation

Each unidirectional light rail vehicle consists of three articulated sections. These are operated bidirectionally in sets of three or four.

Cars of 3000 class
Car designation A-car B-car C-car
Control cab YesNoNo
Motor YesYesYes
Pantograph YesNoNo
Car length m 31.72
ft in 104 ft 13⁄16 in
Capacity Seated 74
Standing 320
Total 394

Incidents

Passengers unloading from a 3000 class train in 2014 due to a service incident.

See also