This page, part of the Graphics Lab Wikiproject, is an archive of requests for 2018.
Please do not edit the contents of this page. You can submit new requests here.
Would it be possible, please, to clean up the image, particularly the (sticky tape?) marks all round the edge? Any clarification of the rather dim image would also be most welcome. Tim riley talk 08:57, 31 October 2018 (UTC)
please trim excess blank space to focus on object… Boilerplatedo not create a new image as it is not needed.-- Kintetsubuffalo (talk) 17:03, 30 October 2018 (UTC)
please fade out or remove side-striping, which hides part of the painting and was clearly added later… -- Kintetsubuffalo (talk) 00:52, 3 November 2018 (UTC)
You have kindly removed vendors' watermarks from images before, and I'd be very grateful if you could do the same for this one: the watermark runs vertically down the right-hand side. Tim riley talk 22:52, 5 November 2018 (UTC)
Please create a crop image of Aires Ali out of this pic. I tried to do that myself by using the crop tool, but for some reason I was unable to do so (the notification mentioned some html problem with original pic). Maybe someone more experienced would be able to grasp what the problem is. -- Sundostund (talk) 02:00, 2 November 2018 (UTC)
please create locally-hosted (not Commons) png version, without the background, color corrected, named File:Mayflower Council CSP… -- Kintetsubuffalo (talk) 08:29, 16 October 2018 (UTC)
Thank you PawełMM, can you make it a png as requested?--Kintetsubuffalo (talk) 17:17, 16 October 2018 (UTC)
@Kintetsubuffalo: According to the terms of use, there can be only one loaded file. I do not know if and how the next copy could be loaded. The graphics are displayed correctly in the infobox. Why do you want to create another copy? PawełMM (talk) 06:34, 17 October 2018 (UTC)
Because that png was my original request that I asked for. I have already fixed the jpg file name which was also not what I requested. Please follow the whole request if you're going to do these. I very much appreciate your work, when you follow the request--Kintetsubuffalo (talk) 09:00, 17 October 2018 (UTC)
PawełMM Why do you have to make a separate image? None was asked for, and it makes no sense to have two images. You are the reason I put those boilerplate warnings on.--Kintetsubuffalo (talk) 17:05, 30 October 2018 (UTC)
This old photograph has developed white dots or speckles all over it. Would it be possible to remove them, please?
Graphist opinion(s)
DonePawełMM (talk) 11:48, 9 November 2018 (UTC)
{{resolved}}
Thank you very much for doing this so quickly and so beautifully. Greatly obliged. Tim riley talk 12:10, 9 November 2018 (UTC)
png version with border removed, staples and scuffs redacted, called File:Eleanor Roosevelt, King George VI, Queen Elizabeth in London, England - NARA - 195320.png please… -- Kintetsubuffalo (talk) 05:08, 8 November 2018 (UTC)
Please straighten, fix the perspective of the images, straighten and do any necessary photoshop editing. Please ensure that all the numberplates are at the ratio of 372:134. Much appreciated --EurovisionNim(talk to me)(see my edits) 09:53, 11 November 2018 (UTC)
Note: If you have an unpleasant reaction to trypophobic images, don't click the links below.
Hi, this is a follow-up to a previous request regarding trypophobic images, which are images that have a particular type of pattern that can cause some viewers acute distress including physical symptoms.
PawełMM, Thanks for the image you provided previously; it is much appreciated, and it engendered much discussion at Talk:Trypophobia#Discussion. After significant back-and-forth about the progressive gif, a new idea was proposed by Flyer22 Reborn (here) which might help, to wit: filling in the holes, but making sure the pattern is visible.
Flyer would have the last word on exactly what they she would like to see here, but as I envisioned it from her words: imagine the original, fixed image remaining as is, except that all the holes are filled in with an opaque paint color a scant shade darker (or lighter?) than the surrounding pod surface, perhaps eyedropped from the color of the average crater rim surrounding the hole and darkened up just a tiny bit. Around each filled-in hole, there could be a thin (1px?) border line of a slightly contrasting color (#FFDC7C? pick whatever works) outlining the present elliptically-shaped countour of the hole. The overall result should look at first glance like a lotus with the crater rims intact but all the holes gone, but upon closer examination, having a pale vestige of where the holes used to be. If the border ellipses are a pain in the neck, or appear too prominent, maybe it's easier to just use the color fill-in with no border. I'd definitely wait for Flyer to check in, though, before spending any time on this. Thanks, Mathglot (talk) 02:10, 2 November 2018 (UTC)
Notes
↑I eyedroppered a few of the crater rims, and got these: #A2B096, #A3AF99, #A5B399, #ACB8A0, #B9BA98, #C1CAB5.
↑Darkened a tiny bit: maybe darker by 080808 or by 101010? Or, maybe lighter by the same amount; would have to see it to see what looks good. For the first crater rim value of #A2B096XXXXXX, darker by 080808 is #9AA88DXXXXXX, and darker by 101010 is #92A086XXXXXX. The latter with an #FFDC7C border is XXXXXX.
@Mathglot: I do not know if I understood your suggestion of the image well. I am posting my proposal (#1) of a sub-masked image. PawełMM (talk) 09:23, 4 November 2018 (UTC)
Thanks, but I imagined it more like how it might look, if you literally took the lotus and held the pod parallel to the ground, and then carefully poured green paint into each hole, until the paint filled up each hole completely. The little round things and the red tip would all be covered up, "underwater" so to speak. That said, if Flyer hasn't shown up to comment, maybe it's not worth it right now. I thank you for your effort! Mathglot (talk) 10:02, 4 November 2018 (UTC)
@Mathglot: I made one more proposal (#2). PawełMM (talk) 11:30, 4 November 2018 (UTC)
Thanks, PawełMM; it's being discussed now here. Mathglot (talk) 21:56, 4 November 2018 (UTC)
@Mathglot: I made one more proposal (#3). This is probably my last suggestion of a filling look... PawełMM (talk) 06:51, 5 November 2018 (UTC)
please fix contrast between her and the background, and straighten… -- Kintetsubuffalo (talk) 20:53, 14 November 2018 (UTC)
Graphist opinion(s)
Done In my opinion, the contrast in this photograph should not change. This is an image made with the low key technique. PawełMM (talk) 07:45, 15 November 2018 (UTC)
PawełMM Then please create a separate png version with fixed contrast between her and the background, same name except extension, as technique aside the subject needs to be seen better. That way the original can preserve the technique if it's important.--Kintetsubuffalo (talk) 16:09, 15 November 2018 (UTC)
please rotate slightly to straight… -- Kintetsubuffalo (talk) 19:46, 5 November 2018 (UTC)
Graphist opinion(s)
DonePawełMM (talk) 06:01, 6 November 2018 (UTC)
:PawełMM the center is still not upright, very close though--Kintetsubuffalo (talk) 15:48, 17 November 2018 (UTC)
It may just be perspective. Thank you!--Kintetsubuffalo (talk) 15:51, 17 November 2018 (UTC)
Hi there. The frame in this image is three dimentional, so its not PD; according to the FA review the article is receiving as we speak, it needs to be cropped out. PS: please overwrite the same file. Thanks, -- LouisAragon (talk) 16:19, 10 November 2018 (UTC)
Graphist opinion(s)
(I moved this here from the illustration workshop. TilmannR (talk) 15:39, 12 November 2018 (UTC))
Hello all, the Military History WikiProject started an internal project audit last year. As a part of it, we're revamping the academy pages, which contains an incomplete page on image restoration. It would great if one (or some) of you can expand the page by sharing the knowledge you've about image restoration. This'll hopefully help new users to get a better understanding about the concept. KCVelaga (talk) 15:16, 19 October 2018 (UTC)
@KCVelaga: That's kind of a huge subject, it's hard to know where to begin with it. There's a lot of judgement and "stuff that works only in specific situations" too. I'm not real sure that advising a brand newb on how best to restore photos is a particularly effective strategy. It would be better to come here, even for "training" purposes. Some of the volunteers here (including myself) would be happy to explain in detail what we did and why to restore images posted here. ᛗᛁᛟᛚᚾᛁᚱPantsTell me all about it. 16:40, 19 October 2018 (UTC)
please split into 4 files, remove background and straighten, named File:21st World Scout Jamboree neckerchief (top rainbow); File:Cumberland Gang Show, New South Wales neckerchief (right red); File:1st Cherrybrook Scout Group, New South Wales neckerchief (bottom brown); and File:Scouts Australia national neckerchief -2017 (left ochre)… -- Kintetsubuffalo (talk) 18:23, 17 November 2018 (UTC)
Need better image; less toned, stronger focus -- Jim Percy (talk) 23:04, 28 October 2018 (UTC)
Hello. I uploaded this envelope with company cachet, about six months ago. The original (subpar) camera shot was uploaded to a CD. The shot is problematic due to its awkward positioning, which also clipped off part of the lower left corner (of envelope). It can't be redone (age factor of other party). Details are explained in the description line at https://commons.wikimedia.org/wiki/File:OJGude.jpg. It's important to save, as contains original info which would be otherwise lost to history. The building should be standing upright and not be slanted downward, but reckon nothing can be done about that (as it would alter other parts of cachet). It backs up detail in the Wikipedia article "Paul Martin (illustrator)." The letter is reachable there through references #128 & 210.
Anyway, I was hoping that someone at "Commons" can lighten it up while increasing its sharpness. The envelope looks too dark. I think it would look more presentable if lightened up. I don't have the ability to make any proper correction with my basic image editor. I can lighten it up, but then unfortunately, the text/image also becomes lighter. The words "Drawn by P.M" on the envelope are in pencil, but should be darker. The image size is purposely very large to make editing easier. In reality, it should be downsized to no lower than 1024 x 768 pixels. Thanks. Jim Percy (talk) 23:04, 28 October 2018 (UTC)
@MjolnirPants: Thanks for adjusting the colors. That does look much better. I might downsize it just a spec later, on my own (from 3285 x 1373 pixels). OTOH. I've noticed some cachet envelopes on Commons in the MB size range. BTW. I touched up part of my above request while you were working on the image, but it didn't change anything important. Jim Percy (talk) 00:31, 29 October 2018 (UTC)
Please remove number (if possible without cropping). Vysotsky (talk) 21:39, 29 November 2018 (UTC)
Discussion
Done. I uploaded in 2 steps - [1] just label removal, [2] minimal cleanup - so that you can easily revert the second step if not desired. --Begoon 23:33, 29 November 2018 (UTC)