Ammonium fluoride

Ammonium fluoride
The ammonium cation
The ammonium cation
The fluoride anion
The fluoride anion
ball-and-stick model of an ammonium cation (left) and a fluoride anion (right)
ball-and-stick model of an ammonium cation (left) and a fluoride anion (right)
Solid sample of ammonium fluoride
Solid sample of ammonium fluoride
Names
IUPAC name
Ammonium fluoride
Other names
Neutral ammonium fluoride
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.031.975 Edit this at Wikidata
EC Number
  • 235-185-9
RTECS number
  • BQ6300000
UNII
UN number 2505
  • InChI=1S/FH.H3N/h1H;1H3 checkY
    Key: LDDQLRUQCUTJBB-UHFFFAOYSA-N checkY
  • InChI=1/FH.H3N/h1H;1H3
    Key: LDDQLRUQCUTJBB-UHFFFAOYAM
  • [F-].[NH4+]
Properties
NH4F
Molar mass 37.037 g/mol
Appearance White crystalline solid
hygroscopic
Density 1.009 g/cm3
Melting point 100 °C (212 °F; 373 K) (decomposes)
83.5 g/100 ml (25 °C)
Solubility slightly soluble in alcohol, insoluble in liquid ammonia
−23.0×10−6 cm3/mol
Structure
Wurtzite structure (hexagonal)
Hazards
GHS labelling:
GHS05: CorrosiveGHS06: Toxic
Danger
H301, H311, H314, H330, H331
P260, P264, P270, P271, P280, P284, P301+P310, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P311, P312, P320, P321, P330, P361, P363, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
0
0
Flash point Non-flammable
Safety data sheet (SDS) ICSC 1223
Related compounds
Other anions
Ammonium chloride
Ammonium bromide
Ammonium iodide
Other cations
Sodium fluoride
Potassium fluoride
Related compounds
Ammonium bifluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkYX markN ?)

Ammonium fluoride is the inorganic compound with the formula NH4F. It crystallizes as small colourless prisms, having a sharp saline taste, and is highly soluble in water. Like all fluoride salts, it is moderately toxic in both acute and chronic overdose.

Structure

Ammonium fluoride adopts the wurtzite crystal structure, in which both the ammonium cations and the fluoride anions are stacked in ABABAB... layers, each being tetrahedrally surrounded by four of the other. There are N−H···F hydrogen bonds between the cations and anions. This structure is very similar to ice, and ammonium fluoride is the only substance which can form mixed crystals with water.

In terms of liquid and gaseous forms, ammonium fluoride sublimes when heated—a property common among ammonium salts. In the sublimation, the salt decomposes to ammonia and hydrogen fluoride; the two gases can still recombine, i.e. the reaction is reversible:

[NH4]F ⇌ NH3 + HF

At elevated pressures, ammonium fluoride melts near 230 °C.

Reactions

On passing hydrogen fluoride gas (in excess) through the salt, ammonium fluoride absorbs the gas to form the addition compound ammonium bifluoride. The reaction occurring is:

NH4F + HF → NH4HF2

Uses

This substance is commonly called "commercial ammonium fluoride". The word "neutral" is sometimes added to "ammonium fluoride" to represent the neutral salt [NH4]F as opposed to the "acid salt" (NH4HF2). The acid salt is usually used in preference to the neutral salt in the etching of glass and related silicates. This property is shared among all soluble fluorides. For this reason it cannot be handled in glass test tubes or apparatus during laboratory work.

Ammonium fluoride is a critical component of buffered oxide etch (BOE), a wet etchant used in microfabrication. It acts as the buffering agent in a solution of concentrated HF, creating an etchant with a more controllable rate of etching (than that of simple concentrated HF solutions).

It is also used for preserving wood, as a mothproofing agent, in printing and dyeing textiles, and as an antiseptic in breweries.

Polymorphism under non-standard conditions

Ammonium fluoride (NH4F) exists in several crystalline phases depending on temperature and pressure. At ambient conditions, its structure is very similar to that of ice, unlike the other ammonium halides (NH4Cl, NH4Br, NH4I), which adopt CsCl-type or NaCl-type structures. Under high pressure, NH4F increasingly resembles the other ammonium halides. It adopts a cubic CsCl-type phase (phase III), followed at very high pressure by a tetragonal phase (phase VIII), analogous to phases seen in the other halides at much lower pressures. The transition to phase VIII occurs around 115 GPa in NH4F, roughly an order of magnitude higher than in NH4Cl, NH4Br, or NH4I. An intermediate tetragonal phase (phase IIIt) appears above about 40 GPa as a precursor to phase VIII.